Panasonic PT-RZ570 (serv.man4) Service Manual ▷ View online
INF-8
SECTION 1 SERVICE INFORMATION
< RZ570 >
[NETWORK]
Sub-menu item
Factory default
[DIGITAL LINK MODE]
[AUTO]
[DIGITAL LINK STATUS]
―
[NETWORK SETUP]
―
[NETWORK CONTROL]
―
[NETWORK STATUS]
―
[DIGITAL LINK MENU]
―
[Art-Net SETUP]
[OFF]
[Art-Net CHANNEL SETTING]
[2]
[Art-Net STATUS]
―
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
When the items cannot be adjusted or used, the items in the menu screen are shown in black characters, and they cannot be adjusted or
set.
f
The factory default setting varies depending on the selected input terminal.
INF-9
SECTION 1 SERVICE INFORMATION
< RZ570 >
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
3. 1. Setting to Service Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu on the
screen.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "1565" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "SERVICE MODE" (MAIN MENU) will be displayed.
3. 2. Resetting to User Mode
1. Press the [MENU] button on the control panel of the projector or on the remote controller to display the main menu.
2. Select a sub menu "service password" of the main menu "projector setup" and press the [ENTER] button.
3. Input the password "0000" by remote controller and press the [ENTER] button.
4. Press the [MENU] button. "USER MODE" (MAIN MENU) will be displayed.
[ Note ] "Service mode" will be canceled even when the power is turned off.
3. 3. Functions of Service Mode
[ Note ] Function varies according to a version of the main microcomputer software.
3. 3. 1. EXTRA OPTION
"EXTRA OPTION" is added to the bottom of the main menu.
6(59,&(3$66:25'
,1387
6(7
(17(5
6(59,&(3$66:25'
6(59,&(02'(
5(7851
0(18
6(59,&(3$66:25'
,1387
6(7
(17(5
86(502'(
5(7851
0(18
6(59,&(3$66:25'
1.
2.
4.
8.
6.
9.
5.
3.
7.
10.
11.
INF-10
SECTION 1 SERVICE INFORMATION
< RZ570 >
1. 3DCMS
• Setting of the 3D Color Management System operation.
- ON : Enable the 3D Color Management system function. (Default setting)
- OFF : Disable the 3D Color Management system function.
2. SELF CHECK
• Self-diagnosing information Displays.
[Note]
• Items (10) - (19) indicates the status of "NG" or "OK". If the "NG" indicates in red, the projector has an abnormality now.
If the "OK" indicates in red, the projector had an abnormality in the past and operates normally now.
• [DEVICE CHECK] item at the bottom right of the screen, (10) - (19) all items status indicate of "OK" or "NG".
If the "NG" indicates in red, even one on either item has an abnormality now.
If the "OK" indicates in red, even one on either item had an abnormality in the past and operates normally now.
• To clear the error status, press the [MENU] key in the SELF CHECK mode, the confirmation window will appear and select
[OK] to clear.
This must be done after finishing the repair or maintenance.
(2)
(1)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(4)
(5)
(6)
(7)
(8)
(9)
(11)
(12)
(13)
(12)
(13)
(17)
(18)
(19)
(18)
(19)
(15)
(14)
(16)
(10)
(21)
(22)
(23)
(24)
(22)
(23)
(24)
(20)
INF-11
SECTION 1 SERVICE INFORMATION
< RZ570 >
(1) --- Projector type (Model No.)
(2) --- Projector serial number
(3) --- Main microprocessor software version
(4) --- Sub microprocessor software version
(5) --- DIGITAL LINK software version
(6) --- Formatter software version
(7) --- FPGA software version
(8) --- LD driver software version
(9) --- Status of EMULATE setting
(10) --- Intake air temperature (Celsius/Fahrenheit)
(11) --- Optical module temperature (Celsius/Fahrenheit)
(12) --- Exhaust air temperature (Celsius/Fahrenheit)
(13) --- LD1 temperature (Celsius)
(14) --- LD2 temperature (Celsius)
(15) --- LD check (Number of the active laser elements in each LD unit.)
• Set as follows before checking.
(16) --- Fans control check (1: normal / 0: abnormal)
(17) --- Luminance sensor check (Detected value:Red/Green/Blue/Yellow)
(18) --- Atmospheric pressure sensor check (hpa/Celsius)
(19) --- Angle sensor check (Horizontal angle/Vertical angle)
*The following information is available for Asian model only.
(20) --- Communication status of the WL-P.C.Board
- YES : Communication good
- NO : Communication error (faulty or disconnected)
(21) --- Firmware version of IC on the WL-P.C.Board
(22) --- Usage environment information
- Applicable country Information/Nonapplicable country Information
(23) --- Functional restriction setting status
- YES : Function restriction has been canceled
- NO : Function restriction has been enabled
(24) --- Function restriction countdown
- Count of communication error/Count of environmental error
- Count is decreased when an error is detected, and become restricted with counter " 0 ". (Maximum 30)
DYNAMIC CONTRAST
OFF
OPERATING MODE
NORMAL
BRIGHTNESS CTRL GAIN
100%
LD2 LD3 LD
4
LD1
H
E
AT
PI
P
E1
H
E
AT
PI
P
E
2
D
M
D
C
IR
C
U
I I
N
E
X
H
AU
S
T1
E
X
H
AU
S
T2
C
E
N
TER
3. AUTO INDEX CALIBRATION
• When replaced the phosphor wheel or color wheel, perform automatic adjustment of each wheel rotational phase.
* Please refer to SECTION 3 (Adjustments) for the procedure.
4. PW INDEX
• Make the rotation phase adjustment of the wheels individually. (Do not change the setting, usually.)
5. CW INDEX
Click on the first or last page to see other PT-RZ570 (serv.man4) service manuals if exist.