DOWNLOAD Panasonic PT-RZ120 (serv.man2) Service Manual ↓ Size: 34.64 MB | Pages: 101 in PDF or view online for FREE

Model
PT-RZ120 (serv.man2)
Pages
101
Size
34.64 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz120-sm2.pdf
Date
PREV: Panasonic PT-RQ22KEJ (serv.man3) Service Manual

Panasonic PT-RZ120 (serv.man2) Service Manual ▷ View online

INF-31
SECTION 1 SERVICE INFORMATION
< RZ120 >
5.  When the communication to the projector is established, below window will appears. Get the system log following to the 
procedure below.
　① Select the projector name you want to get the system log.
　② Select a tab [Log(System)].
　③ Click [Receive] button.
①
②
③
6. The acquisition of system log is complete when the complete dialog window appears.
    Click [OK] button to close the window and check the system log.
  f 
System log window
    The main window of the LogTool is shown in the below. (Display example of system log)
1
2
4
3
5
6
7
8
Function description                                                                                                            
1 Projector selection 
Selection window of the projector for getting the system log
2 System information 
Displays the system information of the projector
3 Error log 
Displays the error log of the projector
4 System log 
Displays the system log of the projector
5 [Save to file] button 
To save the acquired system log to the PC
6 [Receive] button 
To receive the system log from the selected projector
7 [Receive All log] button  To receive the all log from the selected projector
8 [Save All log] button 
To save the acquired all log to the PC
INF-32
SECTION 1 SERVICE INFORMATION
< RZ120 >
5. 3. 4. Error cord of system log
Bit
Error code (hex)
Self-test 
indication Details
Probable cause
0
LOW
ER
00000000 00000001
U11
Intake air temperature warning
External temperature is too high. Intake ventilation holes are 
blocked. Pressure sensor error at highland use.
1
00000000 00000002
U12
Optical module temperature warning
Mounting of heatsink is abnormal. Ventilation holes are 
blocked. Pressure sensor error at highland use.
2
00000000 00000004
U13
Exhaust temperature warning
Exhaust ventilation holes are blocked 
Exhaust fan  deterioration
3
00000000 00000008
U14
Optical module low temperature warning
External temperature is too low.
4
00000000 00000010
U21
Intake air temperature error
External temperature is too high.
Intake ventilation holes are blocked.
5
00000000 00000020
U22
Optical module temperature error
Mounting of heatsink is abnormal. Ventilation holes are 
blocked. Pressure sensor error at highland use.
6
00000000 00000040
U23
Exhaust temperature error
Exhaust ventilation holes are blocked. Exhaust fan deteriora-
tion. Pressure sensor error at highland use.
7
00000000 00000080
U24
Optical module low temperature error
External temperature is too low.
8
00000000 00000100
-
Not used
9
00000000 00000200
-
Not used
10
00000000 00000400
-
Not used
11
00000000 00000800
-
Not used
12
00000000 00001000
-
Not used
13
00000000 00002000
-
Not used
14
00000000 00004000
-
Not used
15
00000000 00008000
-
Not used
16
00000000 00010000
-
Not used
17
00000000 00020000
-
Not used
18
00000000 00040000
-
Not used
19
00000000 00080000
-
Not used
20
00000000 00100000
-
Not used
21
00000000 00200000
-
Not used
22
00000000 00400000
-
Not used
23
00000000 00800000
-
Not used
24
00000000 01000000
FH0
PW1 error (Detect by FM)
PHOSPHOR WHEEL 1 operation is abnormal,
Drive circuit failure (DG-PCB/RB-PCB)
25
00000000 02000000
FH1
PW1 error (Detect by FPGA)
26
00000000 04000000
FH2
PW2 error (Detect by FM)
PHOSPHOR WHEEL 2 operation is abnormal,
Drive circuit failure (DG-PCB/RT-PCB)
27
00000000 08000000
FH3
PW2 error (Detect by FPGA)
28
00000000 10000000
U81
Low AC voltage warning
AC input voltage is too low (Less than 75V)
29
00000000 20000000
-
Not used
30
00000000 40000000
-
Not used
31
00000000 80000000
F15
Luminance sensor warning
Sensor operation error. Connector (M31/RM7) disconnect.
32
00000001 00000000 
H11
Intake air temp sensor disconnected
Intake air temp sensor disconnected. Connector (M11/DG18) 
disconnect.
33
00000002 00000000 
H12
Optical module temp sensor disconnected
DMD temp sensor breaking. (FM-PCB : CF4001)
34
00000004 00000000
H13
Exhaust air temp sensor disconnected
Exhaust air temp sensor disconnected. Connector (M11/BR4) 
disconnect.
35
00000008 00000000
-
Not used
36
00000010 00000000
-
Not used
37
00000020 00000000
H01
Battery replacement for internal clock
Battery level is low. (A-P.C.B)
38
00000040 00000000
FL1
LD1 failed to light
LD1 lighting failure, Drive circuit failure (D-PCB/DR-PCB)
39
00000080 00000000
FL2
LD2 failed to light
LD2 lighting failure, Drive circuit failure (D-PCB/DR-PCB)
40
00000100 00000000
-
Not used
41
00000200 00000000
-
Not used
42
00000400 00000000
FE1 (F50) FAN 1 (RADIATOR 3) error/(warning)
Fan or fan drive circuit is failure
Fan replacement time
43
00000800 00000000
FE2 (F51)  FAN 2 (PW1) error/(warning)
44
00001000 00000000
FE3 (F52) FAN 3 (PW2) error/(warning)
45
00002000 00000000
FE4 (F53) FAN 4 (POWER) error/(warning)
46
00004000 00000000
FE5 (F54) FAN 5 (LD DRIVE) error/(warning)
47
00008000 00000000
FE6 (F55) FAN 6 (EXHAUST 3) error/(warning)
48
00010000 00000000
FE7 (F56) FAN 7 (DMD) error/(warning)
49
00020000 00000000
FE8 (F57) FAN 8 (EXHAUST 1) error/(warning)
50
00040000 00000000
FE9 (F58) FAN 9 (EXHAUST 2) error/(warning)
51
00080000 00000000
FF0 (F59) FAN 10 (RADIATOR 2) error/(warning)
52
00100000 00000000
FF1 (F70) FAN 11 (RADIATOR 1) error/(warning)
53
00200000 00000000
FF2 (F71) FAN 12 (PRISM) error/(warning)
54
00400000 00000000
-
Not used
55
00800000 00000000
-
Not used
56
01000000 00000000
-
Not used
57
02000000 00000000
-
Not used
58
04000000 00000000
-
Not used
59
08000000 00000000
-
Not used
60
10000000 00000000
-
Not used
61
20000000 00000000
FJ0 (F00) PUMP 1 error/(warning)
Liquid cooling pump drive circuit is failure
Liquid cooling unit replacement time
62
40000000 00000000
FJ1 (F01) PUMP 2 error/(warning)
63
80000000 00000000
-
Not used
INF-33
SECTION 1 SERVICE INFORMATION
< RZ120 >
Bit
Error code (hex)
Self-test 
indication Details
Probable cause
64
U
PP
ER
00000000 00000001
-
Not used
65
00000000 00000002
-
Not used
66
00000000 00000004
-
Not used
67
00000000 00000008
-
Not used
68
00000000 00000010
U25
LD1 temperature error
External temperature is too high, Ventilation holes are blocked. 
Pressure sensor error at highland use. Liquid cooling unit is incorrect 
mounting, Pressure sensor error at highland use.
69
00000000 00000020
U26
LD2 temperature error
70
00000000 00000040
-
Not used
71
00000000 00000080
F16
Angle sensor error
Angle sensor error failure.(A-PCB : IC3751)
72
00000000 00000100
H14
LD1 temperature disconnected
LD1 temp sensor breaking, Connector (DR3) disconnect
73
00000000 00000200
H15
LD2 temperature disconnected
LD2 temp sensor breaking, Connector (RT12) disconnect
74
00000000 00000400
-
Not used
75
00000000 00000800
-
Not used
76
00000000 00001000
U16
LD1 temperature warning
External temperature is too high, Ventilation holes are blocked. 
Pressure sensor error at highland use. Liquid cooling unit is incorrect 
mounting, Pressure sensor error at highland use.
77
00000000 00002000
U17
LD2 temperature warning
78
00000000 00004000
-
Not used
79
00000000 00008000
F18
Atmospheric pressure sensor error
Atmospheric pressure sensor  failure. (RM-PCB : IC1201)
80
00000000 00010000
F91
FPGA1 configuration error
Signal processing block failure
81
00000000 00020000
F92
FPGA2 configuration error
82
00000000 00040000
F90
FPGA configuration error
83
00000000 00080000
-
Not used
84
00000000 00100000
-
Not used
85
00000000 00200000
-
Not used
86
00000000 00400000
F96
Lens mounter operation error
Stepping motor operation failure, Position detection sensor failure
87
00000000 00800000
F61
LD1 driver communication error
Communication error with LD1 driver microprocessor
88
00000000 01000000
F62
LD2 driver communication error
Communication error with LD2 driver microprocessor
89
00000000 02000000
FA8
Lower luminance due to LD1 open failure LD1 is failure
90
00000000 04000000
FC8
Lower luminance due to LD2 open failure LD2 is failure
91
00000000 08000000
-
Not used
92
00000000 10000000
FL1
LD1 lighting failure
LD1 light source failure, Drive circuit failure (D-PCB/DR-PCB)
93
00000000 20000000
FL2
LD2 lighting failure
LD2 light source failure, Drive circuit failure (D-PCB/DR-PCB)
94
00000000 40000000
-
Not used
95
00000000 80000000
-
Not used
96
00000001 00000000
-
Not used
97
00000002 00000000
-
Not used
98
00000004 00000000
A08
Sub microprocessor (R8) communication error
Sub microprocessor malfunction (DG-PCB : IC6501)
99
00000008 00000000
A41
IIC communication error 1(RTC)
Device failure on signal processing block.
100
00000010 00000000
A42
IIC communication error 2 (EEPROM)
101
00000020 00000000
-
Not used
102
00000040 00000000
-
Not used
103
00000080 00000000
-
Not used
104
00000100 00000000
-
Not used
105
00000200 00000000
A47
IIC communication error 7 (EDID DIGITAL)
Device failure on signal processing block.
106
00000400 00000000
A48
IIC communication error 8 (EDID ANALOG)
107
00000800 00000000
A49
IIC communication error 9 (ADC1)
108
00001000 00000000
A50
IIC communication error 10 (ADC2)
109
00002000 00000000
A51
IIC communication error 11 
(ACCELERATION)
110
00004000 00000000
-
Not used
111
00008000 00000000
A53
IIC communication error 13 (HD BaseT)
Device failure on signal processing block.
112
00010000 00000000
A54
IIC communication error 14 (atm.)
Device failure on RM-PCB.
113
00020000 00000000
-
Not used
114
00040000 00000000
-
Not used
115
00080000 00000000
-
Not used
116
00100000 00000000
F85
CW error (FM)
COLOR WHEEL operation is abnormal,
Drive circuit failure (DG-PCB/RT-PCB)
117
00200000 00000000
F86
CW error (FPGA)
118
00400000 00000000
-
Not used
119
00800000 00000000
A94
FPGA1 communication error 
Signal processing block failure
120
01000000 00000000
A95
FPGA2 communication error 
121
02000000 00000000
-
Not used
122
04000000 00000000
-
Not used
123
08000000 00000000
A98
FM status error
FM-PCB or DG-PCB failure
124
10000000 00000000
F97
GEOMETRY communication error 
WARP-IC failure on DG-PCB (IC5601)
125
20000000 00000000
-
Not used
126
40000000 00000000
-
Not used
127
80000000 00000000
-
Not used
INF-34
SECTION 1 SERVICE INFORMATION
< RZ120 >
5. 3. 5. Self-diagnosis serial control command and response code
  • Use the command "QVX:ERRS1" to get the information of Self-diagnosis for this model.
    The returned value provides the 127bit self-diagnosis information as follows. (Table below shows no error occurs)
 
  •  The returned value "N" indicates normal and "E" indicates error status. The first bit 0 starts from right and it ends by 127th 
bit at left.
  •  Example: If the self-diagnosis information is inquired if the temperature error occurs on the LD1 unit, the "E" will appear on 
68th bit as the below.
"E" will appear on 68th bit.
bit
127
126
125
124
123
• • • • • •
68
• • • •
4
3
2
1
0
ERRS1=
N
N
N
N
N
• • • • • •
E
• • • •
N
N
N
N
N
bit
127
126
125
124
123
• • • • • • • • • • • •
4
3
2
1
0
ERRS1=
N
N
N
N
N
• • • • • • • • • • • •
N
N
N
N
N
Page of 101
Display

Click on the first or last page to see other PT-RZ120 (serv.man2) service manuals if exist.

RANDOM: