PT-RQ13K (serv.man2) — Panasonic Projector Service Manual (repair manual)

Model
PT-RQ13K (serv.man2)
Pages
127
Size
66.72 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 3-CHIP DLP BASED PROJECTOR
File
pt-rq13k-sm2.pdf
Date

View Panasonic PT-RQ13K (serv.man2) Service Manual online

3-chip DLP Based  Projector
ORDER NO. VED1511591CE
D10
Rev.-4 (2017-06)
■ This service manual is common to the models regardless of suffixes of the Model No.
  • for India
    PT-RQ13KD
  • for Taiwan
    PT-RQ13KT
  • for other countries or regions
    PT-RQ13K
■ Illustrations in this service manual
  • Illustrations of the projector, screen, and other parts may vary from the actual product.
  • Illustrations of the projector with the power cord attached are only examples.
    The shape of the supplied power cords varies depending on the country where you purchased the product. 
Model No.
 
PT-RQ13K
The projection lens is sold separately.
* Resolution is 5 120 x 3 200 dots
  (QUAD PIXEL DRIVE: ON)
2
PREFACE
< RQ13K >
The service technician is required to read and follow the “Safety Precautions” and “Important Safety Notice” in this service manual.
  
 WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. 
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to ser-
vice or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
 WARNING : Use laser Light Radiation eye and skin protection during servicing
 AVERTISSEMENT : Utilisez laser lumière oeil radioprotection et la protection de la peau lors de l'entretien
Notice on laser
This projector is the Class 1 laser product that complies with IEC 60825-1.
 
 
TQFX609
ョㄐㄓチワㄐㄓㄕㄉチモㄎㄆㄓㄊ㄄㄂チ
éヤㄐㄎㄑㄍㄊㄆㄔチㄘㄊㄕㄉチビヒチヤョンチヱ㄂ㄓㄕㄔチヒパフパハヒパチ㄂ㄏㄅチヒパフパハヒヒ
ㄆㄙ㄄ㄆㄑㄕチㄇㄐㄓチㄅㄆㄗㄊ㄂ㄕㄊㄐㄏㄔチㄑㄖㄓㄔㄖ㄂ㄏㄕチㄕㄐチロ㄂ㄔㄆㄓチワㄐㄕㄊ㄄ㄆ
ワㄐハブパチㄅ㄂ㄕㄆㄅチㄋㄖㄏㄆチビフハビパパヘê
リユヤチプパベビブノヒホビパパヘ
ロモヴユンチンモュリモヵリヰワ
モヷヰリュチュリンユヤヵチユヺユチユヹヱヰヴヶンユ
ヤロモヴヴチピンチロモヴユンチヱンヰュヶヤヵ
ヸモヷユチロユワヨヵラホフフベノフプビㄏㄎ
ヮモヹリヮヶヮチヰヶヵヱヶヵホピピピㄎヸ
リユヤチプパベビブノヒホビパパヘ
ンモヺヰワワユヮユワヵチロモヴユン
ユヹヱヰヴリヵリヰワチュリンユヤヵユチュモワヨユンユヶヴユチヱヰヶンチロユヴチヺユヶヹ
モヱヱモンユリロチ‚チロモヴユンチュユチヤロモヴヴユチピン
ロヰワヨヶユヶンヴチュトヰワュユヴホフフベノフプビㄏㄎ
ヮモヹリヮモロユチュヶチンモヺヰワワユヮユワヵホピピピㄎヸ
 
The class 4 laser module is mounted in the inside of a product.
 
TQFX608
ュモワヨユンノヤロモヴヴチフチロモヴユンチンモュリモヵリヰワチヸラユワチヰヱユワチモヷヰリュチユヺユチヰン
チチチチチチチチチチチチチチチチチチチヴレリワチユヹヱヰヴヶンユチヵヰチュリンユヤヵチヰンチヴヤモヵヵユンユュチンモュリモヵリヰワ
ュモワヨユンノンモヺヰワワユヮユワヵチロモヴユンチュユチヤロモヴヴユチフチノチユワチヤモヴチュトヰヶヷユンヵヶンユチ
チチチチチチチチチチチチチチチチチチユヹヱヰヴリヵリヰワチュモワヨユンユヶヴユチモヶチンモヺヰワワユヮユワヵチュリンユヤヵチヰヶチ
チチチチチチチチチチチチチチチチチチュリョョヶヴチュユヴチヺユヶヹチヰヶチュユチロモチヱユモヶ
CAUTION
  Lithium 
Battery
 
 
Risk of explosion if battery is replaced by an incorrect type,
 
 
Replace only with the same of equivalent type recommended by the manufacturer.
 
 
Dispose of used batteries according to the manufacturer’s instructions.
  About lead free solder (PbF)
 
 
This projector is using the P.C.Board which applies lead free solder.
 
 
Use lead free solder in servicing from the standpoint of antipollution for the global environment.
 
 
Notes:
 
 
•  Lead free solder: Sn-Ag-Cu (tin, silver and copper) has a higher melting point (approx. 217°C) than standard solder Typically 
the melting point is 30~40 °C higher. When servicing, use a high temperature soldering iron with temperature limitation func-
tion and set it to 370 ± 10 °C.
 
 
•  Be precautious about lead free solder. Sn-Ag-Cu (tin, silver and copper) will tend to splash when heated too high (approx. 
600°C or higher).
 
 
•  Use lead free solder for the P.C.Board (specified on it as “PbF”) which uses lead free solder. (When you unavoidably use lead 
solder, use lead solder after removing lead free solder. Or be sure to heat the lead free solder until it melts completely, before 
applying lead solder.)
 
 
•  After solder to double layered P.C Boards, check the component side for excess solder which may flow onto the opposite side.
 
 
About the identification of the lead free solder P.C.Board.
 
 
 For the P.C.Board which applies lead free solder, the symbol as shown in the figure below is printed or stamped on the surface 
or the back of P.C.Board.
PbF
3
PREFACE
< RQ13K >
There are special components used in this equipment which are important for safety. These parts are marked by 7 in the schematic 
diagram, circuit board diagrams, exploded views and replacement parts list. It is essential that these critical parts should be replaced 
with manufacturer’s specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of 
manufacturer.
IMPORTANT SAFETY NOTICE
WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
CAUTION:
Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device.
Cautions when transporting
 
f
Before using the projector, remove the dust sponge from the mounting portion of the projection lens and store it 
for the future use. When transporting the projector, remove the projection lens before attaching the dust sponge. 
Otherwise dust will accumulate inside and may cause malfunctions.
 
f
Transport the projector with 2 or more people. Failure to do so may drop the projector, which may result in 
damage or deformation of the projector, or injury.
 
f
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They 
may damage the internal components and result in malfunctions.
 
f
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
Cautions when installing
 
r
Do not set up the projector outdoors.
The projector is designed for indoor use only.
 
r
Do not set up the projector in the following locations.
 
f
Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal 
components or malfunction.
 
f
Location close to sea or where corrosive gas may occur: The projector may fall due to corrosion. Also, failure to 
do so may shorten the life of the components and result in malfunctions.
 
f
cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust 
from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the 
projector.
 
f
the light source, or result in deformation of the projector due to heat, which may cause malfunctions.
Follow the operating environment temperature of the projector.
 
f
Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
 
f
Places where there is high-power laser equipment: Directing a laser beam onto the projection lens surface 
causes damage to the DLP chips.
 
r
Be sure to ask a specialized technician or your dealer when installing the projector on 
a ceiling.
The optional Ceiling Mount Bracket is required.
Model No.: ET-PKD520H (for High Ceilings), ET-PKD520S (for Low Ceilings), ET-PKD520B (Projector Mount 
Bracket)
 
r
AL LINK 
connection.
Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate 
installation.
4
PREFACE
< RQ13K >
 
r
Do not install the projector at an altitude of 4 200 m (13 780') or higher above sea level.
 
r
Do not use the projector in a location that the ambient temperature exceeds 45 °C 
(113 °F).
Using the projector in a location that the altitude is too high or the ambient temperature is too high may reduce the 
life of the components or result in malfunctions.
The upper limit of the operating environment temperature differs depending on the altitude or the [OPERATING 
MODE] setting in the [PROJECTOR SETUP] menu → [OPERATION SETTING]   
 
Altitude above sea level
Setting for [OPERATING MODE]
[NORMAL], [USER1], [USER2], [USER3]
[ECO], [LONG LIFE1], [LONG LIFE2], 
[LONG LIFE3]
Altitude of 0 m (0') or higher 
to lower than 1 400 m 
(4 593')
0 °C (32 °F) to 45 °C (113 °F)
0 °C (32 °F) to 40 °C (104 °F)
Altitude of 1 400 m (4 593') 
or higher to lower than 
2 700 m (8 858')
0 °C (32 °F) to 40 °C (104 °F)
Altitude of 2 700 m (8 858') 
or higher to lower than 
4 200 m (13 780')
The projector cannot be used.
When the Smoke Cut Filter is used, the operating environment temperature should be between 0 °C (32 °F) and 
35 °C (95 °F) regardless of the [OPERATING MODE] setting. It cannot be used at an altitude of 1 400 m (4 593') 
or higher above sea level.
 
r
Projection in all 360° direction is possible.
360°
360°
360°
360° vertically
360° horizontally
360° tilted
(combination of vertical and horizontal)
 
r
Cautions when setting up the projector
 
f
purposes may damage the projector.
 
f
The adjustable feet can be removed if not needed in the installation. However, do not use the screw holes 
holes of the adjustable feet. Failure to do so may cause damage to the projector.
 
r
The projector may not work properly due to strong radio wave from the broadcast 
station or the radio.
If there is any facility or equipment which outputs strong radio waves near the installation location, install the 
, wrap the LAN cable connected to the 
<DIGITAL LINK/LAN> terminal using a piece of metal foil or a metal pipe which is grounded at both ends.
 
r
Focus adjustment
The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in 
the period just after switching on the power. It is recommended that images be projected continuously for at least 
30 minutes before the focus is adjusted.
Page of 127
Display

Download Panasonic PT-RQ13K (serv.man2) Service Manual (Repair Manual)

Here you can view online or download Panasonic PT-RQ13K (serv.man2) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Panasonic PT-RQ13K (serv.man2) Projector. Information contained in Panasonic PT-RQ13K (serv.man2) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).