Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual ▷ View online
DIS-19
SECTION 2 DISASSEMBLY PROCEDURE
<MZ16K/MZ13K/MZ10K>
C
C
D
B
B A
2.13. NF-PCB, Radiator fan block removal
1. Remove 1 screw-A, 2 screws-B and take the radiator fan block upward off.
2. Remove 2 screws-C, 1 screw-D and take the Earth metal-4, and the take off the NF-PCB off.
Radiator fan block
Earth metal-4
NF-PCB
A
D
B
C
E
E
F
F
F
F
2.13.1. Radiator fan removal
1. Remove 2 screws-E and take the Radiator mesh off.
2. Remove each 2 screws-F and take the Radiator fan 1 and 2 off.
E
F
Radiator mesh
Radiator 2 fan
Radiator 1 fan
DIS-20
SECTION 2 DISASSEMBLY PROCEDURE
<MZ16K/MZ13K/MZ10K>
2.14. LD exhaust fan removal
1. Remove 2 screws-A and take the Exhaust duct top and the LD exhaust fan upward
off.
2.15. LD case block removal
1. Remove each 1 screw-A and take the Radiator holder of Liquid cooling unit off.
2. remove 2 screws-B and take the LD case block upward off.
A
A
A
A
B
Exhaust duct top
LD exhaust fan
(EXHAUST 1)
A
A
B
B
LD case block
Radiator holder
DIS-21
SECTION 2 DISASSEMBLY PROCEDURE
<MZ16K/MZ13K/MZ10K>
2.15.1. Wave plate unit removal
1. Remove 2 screws-C, 2 screws-D and take the Wave plate unit and
Lead forming sheet off.
C
D
C
C
D
D
Wave plate unit
Lead forming sheet
E
2.15.2. Wave plate motor removal
1. Remove 2 screws-E and take the Wave plate motor off.
E
Wave plate motor
Wave plate unit
DIS-22
SECTION 2 DISASSEMBLY PROCEDURE
<MZ16K/MZ13K/MZ10K>
F
F
F
2.15.3. LD liquid cooling unit removal
1. Remove 4 torx screws-F and take the LD liquid cooling unit off.
F
Liquid cooling tank
heat receiving jacket
Heat receiving jacket
Liquid cooling pump
Radiator
Apply the heat dissipation compound evenly to the rear surface of liquid cooling pump and heat
receiving place.
Take care that the compound does not stick out.
Heat dissipation compound :
Shin-Etsu Silicone [ G-787 ] grade
Apply heat dissipation compound
LD liquid cooling unit mounting
After replacing the Liquid cooling unit, should apply the heat dissipation compound into
the rear surface of the jacket evenly.
Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.