Panasonic PT-LW362 / PT-LW312 / PT-LB412 / PT-LB382 / PT-LB332 Service Manual ▷ View online
-45-
Electrical adjustment
Input pass code
4. The check code will be indicated on the pass code
entering window.
5.
Input
the check code on the activation code entering
window and the press the [OK] button.
The activation is complete.
Input Check code
Check code
4. Setting the serial number
1. Connect the AC cord and turn the projector on or set the projector
into the normal standby mode.
2. Double click the icon of software [01.Projector Setting-sn
Ver1.0.exe] in the folder of "Serial Number Writing Tool ".
3. Select the available COM port number with pull-down menu button
and
input
the serial number referring to the rating plate on the
projector.
The [Confirm] button will be active when entering the valid 9-digit
serial number.
4. Press the [Confirm] button to write the serial number to the
projector's memory.
After completing the setting,"OK" will appear on the window. If "NG"
appears, take steps 2 and 3 again.
5. Confirm that the correct serial number is displayed on the "Info." -
"S/N" menu of the on-screen menu.
-46-
Electrical adjustment
Software Update Procedure
Main CPU Software Update
1. Required equipment
1. PC : Use for software transfer
2. Communication cable : USB cable
3. Software&data : [Main fw upgrade tool] package data (Download from the projector service homepage.)
2. Communication cable : USB cable
3. Software&data : [Main fw upgrade tool] package data (Download from the projector service homepage.)
2. Preparation
1. Extract the software and data package to your favorite directory on your PC. There are several files in the folder
as below.
- FlashUpgrader.exe
Main firmware upgrading software
- flash_all.inf
Setting file
- root.cramfs
- rootdata.cramf
img file for upgrading
- rw.jffs2
- u-boot.spi-boot
- uImage
- Windows-Side usb driver Folder of USB drivers files
3. USB driver installation
(Only execute when you install the USB driver onto your PC first time.)
1. Press and hold the <
1. Press and hold the <
> and <▲> keys on the control panel and connect AC cord to the projector. Release
keys when the <ON(G)/STANDBY(R)> LED blinks and <WARNING> LED lights.
2. Connect an USB cable between the projector (USB-B) and PC (USB-A).
When connecting the USB cable, the message will appear to install the USB driver software.
3. If the plug and play installation is not succeeded, take the following methods to install the driver manually.
1) Open the "Device Manager", and right-click [Unknown Device] of [Other Devices] and then click [Driver
When connecting the USB cable, the message will appear to install the USB driver software.
3. If the plug and play installation is not succeeded, take the following methods to install the driver manually.
1) Open the "Device Manager", and right-click [Unknown Device] of [Other Devices] and then click [Driver
Software Updating].
2) On the displayed window, click [Search driver software referring to computer] to choose the folder where the
USB drivers are stored.
USB driver stored place: Desktop\Main fw upgrade tool\Windows-Side usb driver\
4. Instillation is completed. To confirm the driver installation, open the "Device Manager" and check with the above
4. Instillation is completed. To confirm the driver installation, open the "Device Manager" and check with the above
figure.
5. Disconnect AC cord and USB cable from the projector.
4. Upgrading procedure
1. Start [FlashUpgrader.exe] in the [Main fw upgrader tool] folder.
2. Setup each item as below;
2. Setup each item as below;
Flash file
: flash_all.inf
Connection
: USB 2.0
Mode
: Flash
-47-
Electrical adjustment
3. Click [Flash] button.
4. Press and hold the <
4. Press and hold the <
> and <▲> keys on the control panel and connect AC code to the projector. Release
keys when the <ON(G)/STANDBY(R)> LED blinks and <WARNING> LED lights.
5. Connect an USB cable between the projector (USB-B) and PC (USB-A).
6. The firmware upgrade will start. It takes 6 to 7 minutes to complete the upgrade.
7. Upgrading completed
After upgrading completed, the <ON(G)/STANDBY(R)> LED will light and the <WARNING> LED will off.
6. The firmware upgrade will start. It takes 6 to 7 minutes to complete the upgrade.
7. Upgrading completed
After upgrading completed, the <ON(G)/STANDBY(R)> LED will light and the <WARNING> LED will off.
Note: The progress bar shows the upgrade progress 1 to 100%. After downloading and writing are finished. The
progress bar indicates 100%.
Quit the application
To confirm the upgraded firmware version, press and hold the <MENU> and <▲> keys more than 3 seconds.
The firmware version will be displayed on the screen as the below.
Group
999
999
No.
0
0
Data
1004
1004
Ver.
2.00
PT-LB412
Version of Main firmware
Sub Version of Main firmware
-48-
Electrical adjustment
Sub CPU Software Update
1. Required equipment
1. PC : Use for software transfer
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software&data : [Serial Bootloader AN1310] package data (Download from the projector service homepage.)
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software&data : [Serial Bootloader AN1310] package data (Download from the projector service homepage.)
2. Preparation
1. Extract the software and data package to your favorite directory on your PC. There are several files in the folder
as below.
2. Connect the serial terminal of projector and PC
with an RS-232C cable.
3. Upgrading procedure
1. Start [AN1310ui.exe] in the [Serial Bootloader
1. Start [AN1310ui.exe] in the [Serial Bootloader
AN1310] folder.
2. Setup the communication port by selecting menu [Program] - [Setting].
3. Click the [Break/Reset Mode] button to enter the upgrading mode.
COM Port
: Available port
Bootload Baud Rate
:19200 bps
Application Baud Rate :115200 bps
Write Options
Write Options
: Flash Program Memory
EEPROM
Communication cable (straight)
D-Sub 9p (Male)
D-Sub 9p (Female)
Projector Connection terminals
Computer
- AN1310ui.exe
Sub firmware upgrading software
- A3_SUB_appcode_V05.50.hex
Firmware hex file
Click on the first or last page to see other PT-LW362 / PT-LW312 / PT-LB412 / PT-LB382 / PT-LB332 service manuals if exist.