Panasonic PT-LW362 / PT-LW312 / PT-LB412 / PT-LB382 / PT-LB332 Service Manual ▷ View online
-41-
Electrical adjustment
4. Write down the EEPROM data (after re-
placing A-P.C.Board)
1. Double click the icon of software [PJ data Write
Tool Ver2.3.exe] in the folder of "DataBackup". The
control window will appear.
control window will appear.
2. Input the exact file name which is stored in the
"DataBackup" folder.
3. Connect the AC cord and turn the projector on.
4. Select the available COM port number and then
4. Select the available COM port number and then
press the button to write-down the EEPROM data to
the projector.
the projector.
5. After completing the writing, "OK" will appear on the
window. If "NG" appears, take step 4 again.
When you write down the data into a new A-PC board,
please confirm that item "ADC DATA" is unchecked.
When you restore the data into the original A-PC
board, check item "ADC DATA".
Each A-PC board has the unique ADC data adjusted
at the factory, so do not overwrite the existing data.
please confirm that item "ADC DATA" is unchecked.
When you restore the data into the original A-PC
board, check item "ADC DATA".
Each A-PC board has the unique ADC data adjusted
at the factory, so do not overwrite the existing data.
Note on software errors
Depending on the PC environment, the software does not start up rarely and displays with the error message.
In this case, please take the following methods to solve the problems.
- Error massages related on "MSCOMM32.OCX" or "COMCTL32.OCX" appears.
In this case, please take the following methods to solve the problems.
- Error massages related on "MSCOMM32.OCX" or "COMCTL32.OCX" appears.
Step1. Move the both files "MSCOMM32.OCX" and "COMCTL32.OCX" in the "DataBackup" folder into a
directory below;
\Windows\System32\
Step2. From "Start" menu, right click "Command Prompt" icon and select "Execute as administrator" to start
the software.
(Start menu - "All Programs" - "Accessories" - "Command Prompt")
Step3. On the window of "Command Prompt", Type the commands as the below;
C:\Windows\system32>
regsvr32 /u mscomm32.ocx[Enter]
C:\Windows\system32>
regsvr32 mscomm32.ocx[Enter]
C:\Windows\system32>
regsvr32 /u comctl32.ocx[Enter]
C:\Windows\system32>
regsvr32 cmctl32.ocx[Enter]
Data file name
-42-
Electrical adjustment
Model no. setting
1. Required equipment
1. PC : Use for model no. setting
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software : Model Name Writing Tool Package data
(Download from the projector service homepage.)
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software : Model Name Writing Tool Package data
(Download from the projector service homepage.)
2. Preparation
1. Move the folder "Model Name Writing Tool" to your favorite directory on your Computer. There are files in the
folder as shown below .
- 01.Projector Setting-Name Ver1.1.exe
Model no. setting software
- 02.ActivateCodeGenerator_Pana-MEI.exe Activate Code Generator software
- DiskID32.dll
- DiskID32.dll
Windows DLL file
- MSCOMM32.OCX
Windows OCX file
- setting.ini
Setting file
2. Connect the serial terminal of projector and PC
with an RS-232C cable.
[Note] Setup the projector not to enter the standby
mode or shutdown mode during the working.
Communication cable (straight)
D-Sub 9p (Male)
D-Sub 9p (Female)
Projector Connection terminals
Computer
3. Activation of software
(Once you have taken the activation of this software on
your PC, skip this procedure)
1. Double click the icon of software [01.Projector
your PC, skip this procedure)
1. Double click the icon of software [01.Projector
Setting-Name Ver1.1.exe] in the folder of "Model
Name Writing Tool ". The activation code entering
window appears and the pass code is indicated.
Name Writing Tool ". The activation code entering
window appears and the pass code is indicated.
2. Double click the icon of software [02.
ActivateCodeGenerator_Pana-MEI.exe] in the
folder of "Model Name Writing Tool ". The pass code
entering window appears.
folder of "Model Name Writing Tool ". The pass code
entering window appears.
Input
the pass code and press the button.
Pass code
Input pass code
3.
Input
the key code "Pana-MEI" and press the [OK]
button.
-43-
Electrical adjustment
4. The check code will be indicated on the pass code
entering window.
5.
Input
the check code on the activation code entering
window and the press the [OK] button.
The activation is complete.
The activation is complete.
Input check code
4. Setting the model name
1. Connect the AC cord and turn the projector on or set the
projector into the normal standby mode.
2. Double click the icon of software [01.Projector Setting-Name
Ver1.1.exe] in the folder of "Model Name Writing Tool ".
3. Press the [>>] button and input the password "1111" and then
press the [OK] button.
press the [OK] button.
4. Select the registered model name with pull-down menu button
and then press the "Choose" button.
If the model name is not listed on the pull-down menu,
input
a
new model name and press the [Add] button to register it.
5. Confirm the selected model name is displayed on the text
box and select the available COM port number with pull-down
menu button.
menu button.
Press the [Confirm] button to write the model name to the
projector's memory.
After completing the setting, "OK" will appear on the window. If
"NG" appears, take steps 4 and 5 again.
6. Confirm that the correct model name is displayed on the on-
screen menu.
Check code
-44-
Electrical adjustment
Serial no. setting
1. Required equipment
1. PC : Use for serial no. setting
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software : Serial Number Writing Tool Package data
(Download from the projector service homepage.)
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Software : Serial Number Writing Tool Package data
(Download from the projector service homepage.)
2. Preparation
1. Move the folder "Serial Number Writing Tool" to your favorite directory on your computer. There are files in the
folder as shown below .
- 01.Projector Setting-sn Ver1.0.exe
Serial no. setting software
- 02.ActivateCodeGenerator_Pana-MEI.exe Activate Code Generator software
- DiskID32.dll
- DiskID32.dll
Windows DLL file
- MSCOMM32.OCX
Windows OCX file
- setting.ini
Setting file
2. Connect the serial terminal of projector and PC
with an RS-232C cable.
[Note] Setup the projector not to enter the standby
mode or shutdown mode during the working.
Communication cable (straight)
D-Sub 9p (Male)
D-Sub 9p (Female)
Projector Connection terminals
Computer
3. Activation of software
(Once you have taken the activation of this software on
your PC, skip this procedure)
1. Double click the icon of software [01.Projector
your PC, skip this procedure)
1. Double click the icon of software [01.Projector
Setting-sn Ver1.0.exe] in the folder of "Serial Number
Writing Tool ". The activation code entering window
appears and the pass code is indicated.
Writing Tool ". The activation code entering window
appears and the pass code is indicated.
2. Double click the icon of software [02.
ActivateCodeGenerator_Pana-MEI.exe] in the folder of
"Serial Number Writing Tool ". The pass code entering
window appears.
"Serial Number Writing Tool ". The pass code entering
window appears.
Input
the pass code and press the button.
Pass code
Input pass code
3.
Input
the key code "Pana-MEI" and press the [OK]
button.
Click on the first or last page to see other PT-LW362 / PT-LW312 / PT-LB412 / PT-LB382 / PT-LB332 service manuals if exist.