Panasonic PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) Service Manual ▷ View online
ADJ-4
SECTION 3 ADJUSTMENTS
< JX200 >
6. Select the save place and click [Save(S)] button.
7. Once the progress bar reaches the right side end, it is a read completion of the data.
8. Select the "Quit" of "File" menu and quit the software.
ADJ-5
SECTION 3 ADJUSTMENTS
< JX200 >
1. 1. 4. Restore the backup EEPROM data (After circuit board replace)
1. Switch the projector to "Normal-Standby" mode (STANDBY/ON indicator is blinking in red).
2. Activate a [DataLogBackup_Tpro.exe] service software.
3. Select "Option " → " Setting" and enter the setting information of the projector.
4. Select the projector model number.
4. Select the projector model number.
5. Select the "Backup (EEPROM)” tab and put a checkmark to the "REPLACE A-PWB" of "COPY MODE" item.
Then click the [WRITE EEPROM] button.
6. Select the saved file and click [OPEN(O)] button.
7. Once the progress bar reaches the right side end, it is a write completion of the data.
8. Select the "Quit" of "File" menu and quit the software.
9. Restart the main power of projector and check that it operates properly.
③
②
①
ADJ-6
SECTION 3 ADJUSTMENTS
< JX200 >
1. 3. Date and time setup
1. Select the [DATE AND TIME] of [SETUP] menu.
2. Set the time zone, date, and time of the built-in clock of the projector.
• For further instructions, refer to the operating instructions.
1. 2. Model information setup
1. Enter the service mode, and select submenu [MODEL] of [EXTRA OPTION] menu.
2. Select the model and press the [ENTER] button.
3. The model information will be applied after the main power restart.
4. Confirm the model information in the sub menu [STATUS] of the menu [PROJECTOR SETUP].
1. 4. Wheel index, Driver current, White balance adjustment
1. 4. 1. Equipment to be used
1. Dark room : Because it adjust based on the measurement results of the luminometer, dark room is required.
2. Screens : Appros 40 inch diagonal size white mat type screen.
3. Luminometer : Konica-Minolta CL-500A.
4. Communication cable for CL-500A : 1 (USB cable)
5. PC : Automatically adjusted using the service tool.
6. LAN cable : Used to communicate between the projector and computer
7. Service Software : [NTN91002 Tool (Service Tool.exe)]
8. Lighting track : It is needed for the power supply of projector. (Please use the ones that are commercially available.)
1. 4. 2. Preparation
1. Set the wide end of zoom lens.
2. Set the throw distance at 1.06m (approx 40inch).
3. Connect the projector to PC with LAN cable.
4. Connect the luminometer to PC with USB cable.
S
cre
en
LA
N
c
able
PC
1.06 m
Luminometer
USB cable
Projector
Dark room
ADJ-7
SECTION 3 ADJUSTMENTS
< JX200 >
1. 4. 3. Communication settings
1. Turn on the power of the projector. (STANDBY/ON indicator is lights in green)
2. Activate a [NTN91002 Tool (Service Tool.exe)] service software.
3. Enter the setting information of the projector and click the [ Next ] button.
1) Open the [WIRED LAN] of [NETWORK] menu and confirm IP address.
2) Open the [NETWORK CONTROL] of [NETWORK] menu and confirm command port.
Items
Default
LAN
IP Address
192.168.10.100
Username
admin1
Password
panasonic
Command Port
1024
[Note]
• If the Username or Password has
been changed, please check with our
customers.
4. When the adjustment screen is displayed, communication setting is completed.
• If an error screen appears, please check the settings.
Error Code : 1
LAN connection check
Error Code : 6
Wrong ID/Passowrd
Error Code : 2
A not corresponding model
Error Code : 7
USB connection check
Error Code : 3
LAN cable check
Error Code : 8
Luminometer check
Error Code : 4
Reboot Windows
Error Code : 9
Adjustment Environment Check
Error Code : 5
Multiple service tool startup
Error Code : 11
Reboot Windows
1. 4. 4. Adjustment procedure
1. Open the "Model Setting" and select the model, and click the [OK] button.
Click on the first or last page to see other PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) service manuals if exist.