DOWNLOAD Panasonic PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) Service Manual ↓ Size: 19.96 MB | Pages: 83 in PDF or view online for FREE

Model
PT-JX200HBU PT-JX200HWU PT-JX200GBE PT-JX200GWE PT-JX200GBD PT-JX200GWD (serv.man2)
Pages
83
Size
19.96 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-jx200hbu-pt-jx200hwu-pt-jx200gbe-pt-jx200gwe-pt.pdf
Date

Panasonic PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) Service Manual ▷ View online

DIS-6
SECTION 2 DISASSEMBLY PROCEDURES
< JX200 >
2. 3. Main unit removal
1. 1) Remove the terminal cover.
    2) Unscrew 4 screws-A and remove the rear cover.
4. 1)  Unscrew 1 screw-G and 1 screw-H and remove the terminal hold plate.
    2) Unscrew 2 screws-J and 1 screw-K and remove the P-P.C.Board.
G
H
J
K
G
J
J
K
H
P-P.C.Board
Terminal hold plate
Earth lead
Cut the clamps
A
A
A
A
A
Rear cover
Terminal cover
DIS-7
SECTION 2 DISASSEMBLY PROCEDURES
< JX200 >
2.  Unscrew 2 screws-B and remove the intake fan block.
  [Note] • BT-P.C.Board removeal, remove the fixing screw in first, and then remove the connector.
 
[Note]
 • Do not remove the connector to the first. There is a risk of injury to finger by fan mesh.
B
B
B
Intake fan block
3. 1) Remove the terminal cover.
    2) Unscrew 3 screws-C and remove the front cover.
C
C
C
C
Terminal cover
Front cover
DIS-8
SECTION 2 DISASSEMBLY PROCEDURES
< JX200 >
  [Note] • If you remove the outer case, please be careful not to damage the projection lens and IR receiver unit.
4. Unscrew one screw-D and remove the terminal cover.
D
D
Terminal cover
5. 1) Unscrew 2 screws-E and remove the cable clamp and earth lead.
    2) Unscrew 4 screws-F and remove the main unit.
Earth lead
Main unit
Cable clamp
F
F
F
E
E
F
E
F
DIS-9
SECTION 2 DISASSEMBLY PROCEDURES
< JX200 >
3. Unscrew 2 screws-D and remove the A/NT-P.C.Board block.
2. 4. A-P.C.Board/NT-P.C.Board removal
1. Remove the main unit following to step [2.3. Main unit removal].
2. 1) Unscrew 2 screws-A and 2 screws-B, and remove the shield plate.
    2) Unscrew 1 screw-C and remove the terminal cover base.
A
B
C
A
A
B
C
B
Terminal cover base
Shield plate
D
D
D
A/NT-P.C.Board block
4. Unscrew 4 screws-E and remove the A-P.C.Board.
  [Note] • The A-P.C.Board is directly connected to the NT-P.C.Board with the connector. Be careful when removing.
E
E
E
E
E
A-P.C.Board block
Directly connected point
Page of 83
Display

Click on the first or last page to see other PT-JX200HBU / PT-JX200HWU / PT-JX200GBE / PT-JX200GWE / PT-JX200GBD / PT-JX200GWD (serv.man2) service manuals if exist.