Panasonic PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES / PT-DZ6710UL / PT-DZ6710EL / PT-DZ6700UL / PT-DZ6700EL / PT-DW6300ULS / PT-DW6300ELS / PT-D6000ULS / PT-D6000ELS / PT-D6000ELK / PT-D6000EK / PT-DW630 Service Manual ▷ View online
(5)
Press the MENU button.
"SERVICEMAN MODE" (MAIN MENU) will be displayed.
"SERVICEMAN MODE" (MAIN MENU) will be displayed.
4.2. Resetting to User Mode
(1)
Press the MENU button.
The MAIN MENU screen will appear.
The MAIN MENU screen will appear.
(2)
Select “PROJECTOR SETUP” using the
or
buttons and
press the ENTER button.
The PROJECTOR SETUP screen will appear.
The PROJECTOR SETUP screen will appear.
(3)
Select SERVICE PASSWORD using the
or
buttons and
press the ENTER button.
The SERVICE PASSWORD screen will appear.
The SERVICE PASSWORD screen will appear.
(4)
Input the password "0000" by remote control and press the ENTER
button.
button.
Note:
·
Asterisk (*) will appear for the password numbers.
(5)
Press the MENU button.
"USER MODE" (MAIN MENU) will be displayed.
"USER MODE" (MAIN MENU) will be displayed.
9
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
4.3. Functions in Serviceman Mode
4.3.1. EXTRA OPTION
"EXTRA OPTION" is added to the MENU.
1. CUT OFF
Sets the display ON/OFF for each color (R, G, B).
2. 3DCMS
Sets ON (Valid) / OFF (Invalid) of 3DCMS.
3. SELF CHECK
Displays SELF CHECK.
10
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
4. CW INDEX
When the color wheel is replaced, adjusts it with
and
buttons.
a. Display the test pattern (Red & Blue pattern).
b. Confirm whether there is a horizontal line.
c.
If a horizontal line is in the red area, decrease CW INDEX setting value by 1, and record the value where the horizontal line
(in both red area and blue area) disappears. (The recorded value is assumed to "A".)
(in both red area and blue area) disappears. (The recorded value is assumed to "A".)
d. If a horizontal line is in the blue area, increase CW INDEX setting value by 1, and record the value where the horizontal line
(in both red area and blue area) disappears. (The recorded value is assumed to "B".)
e. Set the mean value (omission below decimal point) of "A" and "B" to the CW INDEX setting value.
5. POWER ON SHUTTER
·
OPEN: Opens the shutter when power ON.
·
CLOSE: Closes the shutter when power ON.
6. POWER OFF SHUTTER
·
IGNORE: Does not control the shutter when power OFF.
·
OPEN: Opens the shutter when power OFF.
·
CLOSE: Closes the shutter when power OFF.
11
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
7. ERROR OSD
Displays the lamp status with OSD when you do not see the status LED lights because the rear projection, etc.
8. MODEL
Set it when the A-P.C.Board is replaced.
·
If replacing A-P.C.Board (assembly), set MODEL.
* Never set it to a model name different from the model that installs the new A-P.C.Board. If a different model name is set,
it becomes impossible to output normal pictures after the next startup.
it becomes impossible to output normal pictures after the next startup.
* When a new A-P.C.Board is installed without maintenance of adjustment data, it is required to adjust the color wheel.
9. ACF
Executes ACF setting/operation.
·
FILTER SETUP: Sets the interval time of automatic rewinding of the filter.
·
ROLL: Rewinds the filter once compulsorily.
10. CLOG SENSOR CALIBRATION
Execute the sensor calibration when EEPROM (IC3103 or IC3104) / A-P.C.Board or Airflow sensor (CF1302) is replaced.
* Make the main unit to the assembled state without fail, set the projector to the floor installation, and calibrate.
* If the projector installed at an elevation of 1 400 m or higher sea level, be sure to set the HIGH ALTITUDE MODE sub-menu
in PROJECTOR SETUP menu to ON, and attempt the calibration.
in PROJECTOR SETUP menu to ON, and attempt the calibration.
When OK is selected and ENTER button is pressed, the calibration is executed.
·
When the calibration is started, the screen becomes whole magenta.
·
While calibrating, all lamps will light (DUAL mode).
·
Do not switch OFF the projector while calibrating.
·
When the magenta screen will disappear in approx. 15 minutes and it returns to the normal screen, the calibration is
completed.
completed.
·
Turn the POWER switch OFF and turn ON it again, then confirm whether to operate normally.
4.3.2. Ye MODULATE Addition
When the PICTURE MODE menu is displayed, it is enabled to be adjusted with the ENTER button.
·
ON: Validates Ye MODULATE function.
·
OFF: Invalidates Ye MODULATE function.
4.3.3. ADVANCED MENU Addition
The following 4 items are added to the ADVANCED MENU.
1. FRAME LOCK
When the input signal is RGB, FRAME LOCK is added.
2. 480i SD
When non-standard signal of 480i/576i is inputted (AV amplifier, etc.), synchronization might be disordered according to
connected equipment. In this case, set 480i SD to ON.
connected equipment. In this case, set 480i SD to ON.
3. 480p OS
When 480p/576p is received, aliasing noise (longitudinal striated beat noise) might be generated according to connected
equipment. In this case, set 480p OS to ON. However, the resolution decreases a little.
equipment. In this case, set 480p OS to ON. However, the resolution decreases a little.
12
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
Click on the first or last page to see other PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES / PT-DZ6710UL / PT-DZ6710EL / PT-DZ6700UL / PT-DZ6700EL / PT-DW6300ULS / PT-DW6300ELS / PT-D6000ULS / PT-D6000ELS / PT-D6000ELK / PT-D6000EK / PT-DW630 service manuals if exist.