Panasonic PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES / PT-DZ6710UL / PT-DZ6710EL / PT-DZ6700UL / PT-DZ6700EL / PT-DW6300ULS / PT-DW6300ELS / PT-D6000ULS / PT-D6000ELS / PT-D6000ELK / PT-D6000EK / PT-DW630 Service Manual ▷ View online
10.23. Removal of ACF (Auto Cleaning Filter) Unit
(1)
Loosen the 1 screw until it idles and remove the ACF cover.
(2)
Remove the ACF unit.
10.24. Removal of ACF Drive Unit
(1)
Remove the upper case according to the section 10.2. "Removal
of Upper Case".
of Upper Case".
(2)
Remove the ACF unit.
(3)
Unscrew the 4 screw and remove the ACF drive unit.
41
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
11 Replacement of Lamp Unit
11.1. Before replacing the Lamp Unit
WARNING!
·
When replacing the lamp, allow it to cool for at least one hour before handling it.
·
Make sure that two lamp units are always installed.
11.1.1. Precautions on lamp unit replacement
Remove the power plug and confirm that the surroundings of the lamp unit have cooled off.
·
Be careful when handling a light source lamp. The lamp unit has high internal pressure. If improperly handled, explosion might
result.
result.
·
A used lamp unit may burst if it is handled violently.
For disposition of used lamps, request an industrial waste disposal contractor.
·
If you continue to use a lamp after the replacement time, the lamp may break.
·
Philips screwdriver is necessary when replacing a lamp unit.
Take care not to slip your hand when using a screwdriver.
·
It is not possible to turn on the power unless two lamp units are installed.
·
A lamp unit is an optional part. Contact the dealer.
Replacement lamp unit model No.: ET-LAD60 (single bulb), ET-LAD60W (double bulbs)
·
Other lamps than specified above cannot be used. Be sure to use the specified lamp.
11.2. When to replace the Lamp Unit
The lamp units is consumable and the brightness decreases by duration of usage. The LAMP1/LAMP2 indicators will inform you
of the replacement timing at 1 800 hours, and at 2 000 hours, the projector will be turned of. Those figures are rough guidance and
might be shortened by the usage conditions, characteristics of the lamp unit, environmental conditions, and so on. You can check
the duration of usage time using LAMP1/LAMP2 of STATAS in the PROJECTOR SETUP menu.
of the replacement timing at 1 800 hours, and at 2 000 hours, the projector will be turned of. Those figures are rough guidance and
might be shortened by the usage conditions, characteristics of the lamp unit, environmental conditions, and so on. You can check
the duration of usage time using LAMP1/LAMP2 of STATAS in the PROJECTOR SETUP menu.
If you keep using the lamp unit after 2 000 hours, it cause the damage of the projector. Automatically the projector will be powered
off after 10 minutes.
off after 10 minutes.
42
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
11.3. Indication of Lamp Monitor
43
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
12 Troubleshooting
The alphabets (A, FM, etc.) in the left box of the inspection items indicate the names of P.C.Boards or modules to be checked.
44
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
Click on the first or last page to see other PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES / PT-DZ6710UL / PT-DZ6710EL / PT-DZ6700UL / PT-DZ6700EL / PT-DW6300ULS / PT-DW6300ELS / PT-D6000ULS / PT-D6000ELS / PT-D6000ELK / PT-D6000EK / PT-DW630 service manuals if exist.