Panasonic PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL Service Manual ▷ View online
4.3. Functions in Serviceman Mode
4.3.1. EXT OPTION
"EXT OPTION" is added to the MENU.
1. CUT OFF
Sets the display ON/OFF for each color (R, G, B).
2. LAMP RELAY
"OFF", "4h", "5h", "6h" . . . "20h", "21h", "22h":
If "SINGLE" is set on LAMP SELECT, Lamp Unit 1 and Lamp Unit 2 are automatically switched alternately at intervals of the
selected setting time (for 4-22 hours).
selected setting time (for 4-22 hours).
3. ADJUST DATE
Sets the time zone and date.
4. LAMP DUAL24h
When LAMP SELECT is DUAL, lights only one lamp for four hours from the specified time.
5. SELF CHECK
Displays SELF CHECK.
There are 4 pages, and it is switched with
and
buttons.
9
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL
[1st page]
10
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL
[2nd page]
[3rd page]
[4th page]
6. CW INDEX
When the color wheel is replaced, adjusts it with
and
buttons.
a. Display the test pattern 9 (Red & Blue pattern).
b. Confirm whether there is a horizontal line.
11
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL
c.
If a horizontal line is in the red area, decrease CW INDEX setting value by 1, and record the value where the horizontal line
(in both red area and blue area) disappears. (The recorded value is assumed to "A".)
(in both red area and blue area) disappears. (The recorded value is assumed to "A".)
d. If a horizontal line is in the blue area, increase CW INDEX setting value by 1, and record the value where the horizontal line
(in both red area and blue area) disappears. (The recorded value is assumed to "B".)
e. Set the mean value (omission below decimal point) of "A" and "B" to the CW INDEX setting value.
7. P. ON SHUTTER
·
Open: Opens the shutter when power ON.
·
Close: Closes the shutter when power ON.
8. P. OffSHUTTER
·
IGNORE: Does not control the shutter when power OFF.
·
Open: Opens the shutter when power OFF.
·
Close: Closes the shutter when power OFF.
9. ERROR OSD
Displays the lamp status with OSD when you do not see the status LED lights because the rear projection, etc.
10. H.MASK PULSE
When the signal of 480i or 576i is inputted, the synchronization might become unstable. It might be stable when H.MASK
PULSE is set to "SPECIAL".
PULSE is set to "SPECIAL".
·
STANDARD: Does not execute special signal processing.
·
SPECIAL: Executes special signal processing.
11. SIGNAL DATA ALL ERASE
Resets the setting value of each signal to the initial value of the factory shipment.
12. OUTPUT RESO
Sets OUTPUT RESO as below if the A-P.C.Board is replaced.
·
D5600*: XGA
·
DW5000*: WXGA
4.3.2. SUB-KEYSTONE
"SUB-KEYSTONE" is added to KEYSTONE in the "POSITION" menu.
If KEYSTONE and "Lens shift" are used at the same time, the right and left may be corrected in the unbalance.
At this time, only the right side can be corrected by SUB-KEYSTONE.
12
PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL
Click on the first or last page to see other PT-D5600U / PT-D5600E / PT-D5600UL / PT-D5600EL / PT-DW5000U / PT-DW5000E / PT-DW5000UL / PT-DW5000EL service manuals if exist.