Panasonic KX-CL400 Service Manual ▷ View online
8.7.4. Paper Pickup Motor and Motor Bracket
(1) Remove the 2 screws from the paper pickup motor.
(2) If necessary, disconnect the connector CN22 on the engine
board, and cut the plastic belts which bundles the pickup
motor cable.
motor cable.
(3) Remove the paper pickup motor from the paper pickup
motor bracket.
(4) Remove the paper pickup motor bracket (4 screws).
(5) The paper pickup drive gear can be removed from the
paper pickup motor bracket.
8.7.5. Main Drive Unit
Important Notice: Handling of Main Drive Unit
125
KX-CL400
8.7.5.1. Inner Cover, ADU Jam Detection Sensor Board and ADU Detection Sensor
1. Remove the inner cover (2 screws).
2. Disconnect the 2 connectors from the inner cover.
3. Remove the fuser earth plate (1 screw).
4. If necessary, remove the ADU jam detection sensor board
and ADU detection sensor.
8.7.5.2. Main Drive Unit
1. Remove the 7 screws, securing the main drive unit.
2. If necessary, disconnect the 2 motor cables.
3. Separate the main drive unit from the chassis.
4. If necessary, disconnect the sensor cable from the main drive
unit.
Note: For easy re-installation of the main drive unit
When reinstalling the main drive unit, see the section
8.11 “Paper Feed Unit” and remove a clip and the
registration clutch from the paper feed unit.
8.11 “Paper Feed Unit” and remove a clip and the
registration clutch from the paper feed unit.
After reinstalling the main drive unit, reinstalling the
registration clutch and a clip to the paper feed unit.
registration clutch and a clip to the paper feed unit.
126
KX-CL400
8.7.5.3. Main Drive Unit Disassembly
Notice: Installing CMY Motor
1. Remove the 4 screws (A) and 7 screws (B).
2. Remove the drive unit bracket (S), bushing and washer from
the drive unit.
3. If necessary, remove the Acc. GND spring (1 screw).
127
KX-CL400
1. Remove the feed idle gear, cam gear, PC (Print Cartridge)
idle gear (L), etc.
128
KX-CL400