DOWNLOAD Panasonic TX-PR50VT30 Service Manual ↓ Size: 8.22 MB | Pages: 127 in PDF or view online for FREE

29

1. Disconnect the connector (SS11).
2. Disconnect the flexible cable (SS33).
3. Disconnect the flexible cable (SS53).
4. Remove the screws (

×4 , 

×4 

) and remove the SS-

Board.

1. Disconnect the Terminal covers and the Shield metals

(See section 9.5.).

2. Remove the SS-Board (See section 9.11.).
3. Disconnect the flexible cables (SS54 and SS56).
4. Remove the screws (

×2 

) and remove the SS2-Board.

1. Unlock the cable clampers to free the cable.
2. Remove the screws (

×3 ).

3. Remove the Relay connector and remove the Fan.

1. Unlock the cable clampers to free the cable.
2. Remove the screws (

×3 , 

×7 

) and remove the SP

shield metal L.

3. Remove the screws (

×3 , 

×7 

) and remove the SP

shield metal R.

4. Disconnect the Relay connector.
5. Remove the screws (

×2 

 each) and remove the Speak-

ers (L, R).

30

1. Unlock the cable clampers to free the cable.
2. Disconnect the Relay connector.
3. Remove the screws (

×3 

) and remove the Woofer.

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (

×9 , 

×4

) and the Stand bracket.

1. Remove the SP shield metal L. (See section 9.14.)
2. Remove the Stand bracket. (See section 9.16.)
3. Remove the screw (

×1 ).

4. Remove the claws (

×3 ).

5. Disconnect the connector (K1) and remove the K-Board

from the LED panel.

1. Remove the SP shield metal L. (See section 9.14.)
2. Remove the screws (

×2 ).

3. Disconnect the connector (S10) and remove the S-Board.

1. Remove the SP shield metal R. (See section 9.14.)
2. Remove the Stand bracket. (See section 9.16.)
3. Remove the screw (

×1 

) and remove the claws (

×3

).

4. Disconnect the connector (V14) and remove the V-Board

from the 3D emitter panel.

1. Remove the Speakers. (See section 9.14.)
2. Remove the Stand bracket. (See section 9.16.)
3. Remove the K, S and V-Board. (See section 9.17 - 19.)
4. Remove the screws (

×2 

) and remove the Bottom cab-

inet assy.

31

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Bottom cabinet assy. (See section 9.20.)
3. Remove the screws (

×4 , 

×14 ).

4. Remove the Plasma panel section from the Cabinet assy.

1. Remove the Cabinet assy. (See section 9.21.)
2. Remove the Tape from the Contact metals.
3. Remove the screws (

×9 ).

4. Remove the Contact metal side (L, R).
5. Remove the screws (

×6 ).

6. Remove the Contact metal top.
7. Remove the screws (

×15 ).

8. Remove the Contact metal bottom.

1. Remove the Contact metal bottom. (See section 9.22.)
2. Disconnect the flexible cables (CB1, CB2 and CB3).
3. Disconnect the flexible cable (C10).
4. Disconnect the connector (C14).
5. Remove the screws (

×3 

) and remove the C1-Board.

32

1. Remove the Contact metal bottom. (See section 9.22.)
2. Disconnect the flexible cables (CB4, CB5, CB6, CB7,

CB8 and CB9).

3. Disconnect the flexible cables (C20, C21 and C26).
4. Remove the screws (

×4 

) and remove the C2-Board.

1. Remove the Contact metal bottom. (See section 9.22.)
2. Disconnect the flexible cables (CB10, CB11, CB12,

CB13, CB14 and CB15).

3. Disconnect the flexible cables (C31 and C36).
4. Disconnect the connector (C35).
5. Remove the screws (

×4 

) and remove the C3-Board.

1. Remove the screws (

×14 

) and remove the AL frames.

2. Remove the screws (

×4 

 each) and remove the Corner

fixing metals.

1. Place a carton box packed a new Plasma panel on the

flat surface of the work bench.

2. Open a box and without taking a new Plasma panel.
3. Attach the Cabinet assy and each P.C.Board and so on,

to the new Plasma panel.