DOWNLOAD Panasonic TX-PR50VT30 Service Manual ↓ Size: 8.22 MB | Pages: 127 in PDF or view online for FREE

17

1. Purpose

Restrict a function for hotels.

2. Access command to the Hotel mode setup menu

In order to display the Hotel mode setup menu:
While pressing [VOLUME (-)] button of the main unit,
press [AV] button of the remote control three times within
2 seconds.

Then, the Hotel mode setup menu is displayed.

3. To exit the Hotel mode setup menu 

Disconnect AC power cord from wall outlet.

4. Explain the Hotel mode setup menu

Item

Function

Hotel Mode

Select hotel mode On/Off

Initial INPUT

Select input signal modes.
Set the input, when each time power is switched
on.
Selection :
Off/Analogue/DVB-C/DVB-T/AV1/AV2/COMPO-
NENT/HDMI1/HDMI2/HDMI3/HDMI4

• Off: give priority to a last memory. However,

Euro model is compulsorily set to TV.

• AVnS/AVnC: only Euro model selectable

Initial POS

Select programme number.
Selection :
 Off/0 to 99

• Off: give priority to a last memory

Initial VOL Level

Adjust the volume when each time power is
switched on.
Selection/Range :
Off/0 to 100

• Off: give priority to a last memory

Maximum VOL 
Level

Adjust maximum volume.
Range : 
 0 to 100

Button Lock

Select local key conditions.
Selection : 
 Off/SETUP/MENU/ALL

• Off: altogether valid
• SETUP: only F-key is invalid

(Tuning guide (menu) can not be selected.)

• MENU: only F-key is invalid

(only Volume/Mute can be selected.)

• ALL: altogether invalid.

Remote Lock

Select remote control key conditions.
Selection :
 Off/SETUP/MENU

• Off: altogether valid
• SETUP: only Setup menu is invalid
• MENU: Picture/Sound/Setup menu are invalid

Private Information Select private information for VIERA Cast is Keep

or Reset if Hotel mode is set to [On] when TV
power on.
Selection :
Keep/Reset

• Keep: private information for VIERA Cast is

keep

• Reset: private information for VIERA Cast is

reset

18

When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board.

When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other
TVs.

Make pwd file as startup file for (a) or (b) in a empty SD card.

1. Insert a empty SD card to your PC.
2. Right-click a blank area in a SD card window, point to New, and then click text document. A new file is created by default 

(New Text Document.txt).

3. Right-click the new text document that you just created and select rename, and then change the name and extension of the

file to the following file name for (a) or (b) and press ENTER.

(a) For Board replacement : boardreplace.pwd
(b) For Hotel : hotel.pwd 

Please make only one file to prevent the operation error.
No any other file should not be in SD card.

19

1. Turn on the TV set.
2. Insert SD card with a startup file (pwd file) to SD slot.

On-screen Display will be appeared according to the startup file automatically.

3. Input a following password for (a) or (b) by using remote control.

(a) For Board replacement : 2770
(b) For Hotel : 4850

Data will be copied from TV set to SD card.
It takes around 2 to 6 minutes maximum for copying.

4. After the completion of copying to SD card, remove SD card from TV set. 
5. Turn off the TV set.

Following new folder will be created in SD card for data from TV set.

(a) For Board replacement : user_setup
(b) For Hotel : hotel 

20

1. Turn on the TV set.
2. Insert SD card with Data to SD slot.

On-screen Display will be appeared according to the Data folder automatically.

3. Input a following password for (a) or (b) by using remote control.

(a) For Board replacement : 2771
(b) For Hotel : 4851

Data will be copied from SD card to TV set.

4. After the completion of copying to SD card, remove SD card from TV set. 

(a) For Board replacement : Data will be deleted after copying (Limited one copy).
(b) For Hotel : Data will not be deleted and can be used for other TVs.

5. Turn off the TV set.

1. Depending on the failure of boards, function of Data copy for board replacement does not work.
2. This function can be effective among the same model numbers.