Panasonic TH-65VX100U / TH-65VX100E Service Manual ▷ View online
9
TH-65VX100U / TH-65VX100E
4 Specifications
Power Source
110 - 127 V AC, 50/60Hz (U)
220 - 240 V AC, 50/60Hz (E)
Power Consumption
Power on
755 W (U)
710W (E)
Stand-by condition
Save OFF 1.0 W, Save ON 0.5 W (U)
Save off 1.2 W, Save on 0.7 W (E)
Power off condition
0.2 W (U)
0.4 W (E)
Plasma Display panel
Drive method: AC type 65-inch,
16:9 aspect ratio
16:9 aspect ratio
Screen size
56.4" (1,434 mm) (W)
× 31.7" (807 mm) (H) × 64.7" (1,646 mm) (diagonal)
(No. of pixels)
2,073,600 (1,920 (W)
× 1,080 (H) ) [5,760 × 1,080 dots]
Operating condition
Temperature
32
°F - 104 °F (0 °C - 40 °C)
Humidity
20 % - 80 %
Applicable signals
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals
VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
HDMI A-B
TYPE A Connector
× 4
COMPONENT / RGB IN
Y/G (RCA PIN JACK)
with sync 1.0 Vp-p (75-ohm)
P
B
/B, P
R
/R (RCA PIN JACK)
0.7 Vp-p (75-ohm)
AUDIO IN (RCA PIN JACK
× 2)
0.5 Vrms
PC IN
(HIGH-DENSITY Mini-D-SUB 15PIN)
Y or G with sync 1.0 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)
Y or G without sync 0.7 Vp-p (75-ohm)
B / P
B
/ C
B
: 0.7 Vp-p (75-ohm)
R / P
R
/ C
R
: 0.7 Vp-p (75-ohm)
HD / VD: 1.0 - 5.0 Vp-p (high impedance)
VBS (use HD port) (E)
with picture 1.0 Vp-p (high impedance) (E)
without picture 0.3 Vp-p (high impedance) (E)
without picture 0.3 Vp-p (high impedance) (E)
AUDIO IN (M3 JACK)
0.5 Vrms
SERIAL
EXTERNAL CONTROL TERMINAL (D-SUB 9PIN)
RS-232C COMPATIBLE
Speaker terminal
8-ohm, 20 W [10 W + 10 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter
N2QAYB000323
Batteries
AA Size
× 2 (U)
2
× R6 Size (E)
Fixing band
TMME203
× 1
Dimensions (W
× H × D)
61.2” (1,554 mm)
× 36.4” (924 mm) × 3.8” (94 mm)
Mass (weight)
approx. 152.2 lbs (U)
approx. 69.0 kg net (E)
Note:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below. (E)
• This equipment complies with the EMC standards listed below. (E)
EN55022, EN55024, EN61000-3-2, EN61000-3-3.
10
TH-65VX100U / TH-65VX100E
5 Operating Instructions
11
TH-65VX100U / TH-65VX100E
GPF11D chassis series have special function and operation setting facility called Option Menu. This Option Menu is useful
for special function required customers. This should be set at the installation stage.
Option Menu for GPF11D series
Option menus
default setting
Contents
Onscreen display
On
Enable/Disable to display input mode indication after power on and no signal
indication.
indication.
All Aspect
Off
Aspect mode: default/All aspect mode.
Studio mode
Off
Sets for switching functions in setting menus used for television studio applica-
tions.
tions.
Function button assign
Scrolling bar
Specifies the function activated when the "FUNCTION" button on the remote
control is pressed.
control is pressed.
Memory lock
－
Locks or unlocks saved profiles. Also for setting passwords.
12
TH-65VX100U / TH-65VX100E
6 Service Mode
6.1.
CAT (Computer Aided Test) mode
To exit the CAT mode, access the ID mode and switch off the main power.
6.1.1.
IIC mode
Select the IIC mode by Up/Down button on the remote control at the front page of CAT mode and then press the OK button on the
remote control.
remote control.
Subject and item are mentioned on “IIC mode structure”.
To exit the IIC mode, press the RETURN button on the remote control.
To exit the IIC mode, press the RETURN button on the remote control.
Click on the first or last page to see other TH-65VX100U / TH-65VX100E service manuals if exist.