Panasonic TH-65VX100U / TH-65VX100E Service Manual ▷ View online
29
TH-65VX100U / TH-65VX100E
8.19. Removal of C1, C2, C3, C4, C5,
C6-Board
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board).
2. Remove the Cabinet Block.
(Refer to Removal of Front Glass, V1, V2-Board and Cab-
inet Assy)
inet Assy)
3. Remove 8 screws and then remove the Fan Blocks (2, 3).
4. Disconnect the Fan Relay Connectors.
4. Disconnect the Fan Relay Connectors.
5. Remove 4 screws ( ) and then remove the Speaker Ter-
minal Blocks (L), (R).
6. Remove 4 screws ( ) and then remove the Reinforce-
ment Angles (L), (R).
7. Remove 12 screws ( ) and then remove the Connection
Plates (A, B, D, E).
8. Remove 12 screws ( ) and then remove the Connection
Plates (C, F).
8.19.1.
Removal of C1-Board
1. Remove the flexible cables from the connectors (C10,
C11).
2. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2, CA3, CA4, CA5).
3. Remove 5 screws ( ) and then remove C1-Board.
8.19.2.
Removal of C2-Board
1. Remove the flexible cables from the connectors (C20,
C21, C22, C23).
2. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CA6, CA7, CA8, CA9,
CA10).
CA10).
3. Remove 5 screws ( ) and then remove C2-Board.
8.19.3.
Removal of C3-Board
1. Disconnect the connector (C32).
2. Remove the flexible cable from the connector (C33).
3. Remove 10 screws ( ) and then remove the flexible
2. Remove the flexible cable from the connector (C33).
3. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CA11, CA12, CA13, CA14,
CA15).
CA15).
4. Remove 5 screws ( ) and then remove C3-Board.
30
TH-65VX100U / TH-65VX100E
8.19.4. Removal of C4-Board
1. Disconnect the connectors (C43, C45).
2. Remove the flexible cable from the connector (C41).
3. Remove 10 screws ( ) and then remove the flexible
2. Remove the flexible cable from the connector (C41).
3. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CB11, CB12, CB13, CB14,
CB15).
CB15).
4. Remove 5 screws ( ) and then remove C4-Board.
8.19.5. Removal of C5-Board
1. Remove the flexible cables from the connectors (C50,
C51, C52, C53).
2. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CB6, CB7, CB8, CB9,
CB10).
CB10).
3. Remove 5 screws ( ) and then remove C5-Board.
8.19.6. Removal of C6-Board
1. Remove the flexible cables from the connectors (C60,
C61).
2. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CB1, CB2, CB3, CB4, CB5).
3. Remove 5 screws ( ) and then remove C6-Board.
8.20. Removal of Plasma Display
Panel
The C1, C2, C3, C4, C5, C6 Boards are connected with the
Plasma Display Panel for the repair.
Plasma Display Panel for the repair.
1. Disconnect the Fan Relay Connectors of Fans (A, B, F).
2. Remove 12 screws and then remove the Fan Blocks (1,
2, 4).
3. Remove 4 screws and then remove the Fan Block (3).
4. Disconnect the Fan Relay Connectors.
4. Disconnect the Fan Relay Connectors.
31
TH-65VX100U / TH-65VX100E
5. Remove 4 screws and then remove the Reinforcement
Angles (L), (R).
6. Disconnect the connectors (DN3, DN5).
7. Remove the flexible cables from the connectors (DN1,
7. Remove the flexible cables from the connectors (DN1,
DN2).
8. Remove 4 screws and then remove the DN-Board Block.
9. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
10. Remove 4 screws and then remove the Slot Block.
11. Remove 8 screws ( ) and then remove the Shield Plates
(A, B).
12. Remove 7 screws ( ) and then remove the Cable Hold-
ers (A, B).
13. Disconnect the connector (D25).
14. Remove the flexible cables from the connectors (C11,
14. Remove the flexible cables from the connectors (C11,
C21, C22, C52, C53, C61, SC20).
15. Remove 4 screws and then remove D-Board.
32
TH-65VX100U / TH-65VX100E
16. Disconnect the connectors (P2, P9, P11, P12).
17. Remove 8 screws and then remove P(MULTI)-Board,
17. Remove 8 screws and then remove P(MULTI)-Board,
P(SUS)-Board and Fixed Plate.
18. Remove 4 screws and then remove the Speaker Terminal
Blocks (L), (R).
19. Disconnect the connector (SS34).
20. Remove 2 screws and then remove the S1-Board Block.
20. Remove 2 screws and then remove the S1-Board Block.
21. Remove 18 screws.
22. Pull the bottom of the Plasma Display Panel forward
(arrow1).
23. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
24. Remove 12 screws ( ) and then remove the Connection
Plates (A, B, D, E).
25. Remove 12 screws ( ) and then remove the Connection
Plates (C, F).
Click on the first or last page to see other TH-65VX100U / TH-65VX100E service manuals if exist.