Panasonic TH-65PF30W / TH-65PF30T / TH-65PF30G Service Manual ▷ View online
9
TH-65PF30W / TH-65PF30T / TH-65PF30G
4 Specifications
TH-65PF30W / TH-65PF30T
Power Source
Power Source
220 - 240 V AC, 50/60 Hz (W)
110 V AC, 60 Hz (T)
Power Consumption
Power on
510 W (W)
530 W (T)
Stand-by condition
Save off 0.8 W, Save on 0.5 W (W)
Save off 0.7 W, Save on 0.4 W (T)
Power off condition
0.3 W (W)
0.2 W (T)
Plasma Display panel
Drive method: AC type 65-inch,
16:9 aspect ratio
16:9 aspect ratio
Screen size
1,434 mm (W)
× 806 mm (H) × 1,645 mm (diagonal)
(No. of pixels)
2,073,600 (1,920 (W)
× 1,080 (H)) [5,760 × 1,080 dots]
Operating condition
Temperature
0
°C - 40 °C
Humidity
20 % - 80 %
Applicable signals
Color System
NTSC, PAL, PAL60, SECAM, Modified NTSC
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals
VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
LAN
RJ45 10BASE-T/100BASE-TX, compatible with PJLink
TM
AV IN
VIDEO
BNC
1.0 Vp-p (75
Ω)
AUDIO L-R RCA Pin jack
× 2
0.5 Vrms
HDMI
TYPE A Connector
COMPONENT / RGB IN
Y / G
BNC
with sync 1.0 Vp-p (75
Ω)
P
B
/C
B
/B
BNC
0.7 Vp-p (75
Ω)
P
R
/C
R
/R
BNC
0.7 Vp-p (75
Ω)
AUDIO L-R RCA Pin jack
× 2
0.5 Vrms
DVI-D IN
DVI-D 24 Pin
Compliance with DVI Revision 1.0
Content Protection
Compatible with HDCP 1.1
AUDIO
Stereo mini jack (M3)
× 1
0.5 Vrms, Shared with PC IN
PC IN
High-Density Mini D-sub 15 Pin
Y or G with sync 1.0 Vp-p (75
Ω)
Y or G without sync 0.7 Vp-p (75
Ω)
P
B
/ C
B
/ B:0.7 Vp-p (75
Ω)
P
R
/ C
R
/ R:0.7 Vp-p (75
Ω)
HD / VD:1.0 - 5.0 Vp-p (high impedance)
AUDIO
Stereo mini jack (M3)
× 1
0.5 Vrms, Shared with DVI-D IN
SERIAL
External Control Terminal
D-sub 9 Pin
D-sub 9 Pin
RS-232C compatible
3D IR TRANSMITTER
for 3D IR TRANSMITTER
3D SHUTTER OUT M3 jack
3D SHUTTER OUT M3 jack
× 1
DC 8V OUT Center plus, for EIAJ 4mm plug
EXT SP
8
Ω, 20 W [10 W + 10 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter
N2QAYB000535
Batteries
R6 Size
× 2 (W)
AA Size
× 2 (T)
Clamper
TMME289
× 1
Ferrite Core
J0KG00000014
× 2 (W)
Dimensions (W
× H × D)
1,554 mm
× 925 mm × 99 mm
Mass (weight)
main unit only
approx. 60.0 kg net
with speakers
approx. 66.0 kg
Notes:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
10
TH-65PF30W / TH-65PF30T / TH-65PF30G
TH-65PF30G
Power Source
Power Source
110 - 127 V AC, 50/60 Hz (USA, Canada and Mex-
ico)
ico)
220 - 240 V AC, 50/60 Hz (Europe and Asia)
Power Consumption
Power on
555 W (USA, Canada and Mexico)
510 W (Europe and Asia)
Stand-by condition
Save off 0.7 W, Save on 0.4 W (USA, Canada and
Mexico)
Mexico)
Save off 0.8 W, Save on 0.5 W (Europe and Asia)
Power off condition
0.2 W (USA, Canada and Mexico)
0.3 W (Europe and Asia)
Plasma Display panel
Drive method: AC type 65-inch,
16:9 aspect ratio
16:9 aspect ratio
Screen size
56.4 inch (W)
× 31.7 inch (H) × 64.7 inch (diagonal) / 1,434 mm (W) × 806 mm (H) × 1,645 mm (diagonal)
(No. of pixels)
2,073,600 (1,920 (W)
× 1,080 (H)) [5,760 × 1,080 dots]
Operating condition
Temperature
32
°F - 104 °F / 0 °C - 40 °C
Humidity
20 % - 80 %
Applicable signals
Colour System
NTSC, PAL, PAL60, SECAM, Modified NTSC
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals
VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
LAN
RJ45 10BASE-T/100BASE-TX, compatible with PJLink
TM
AV IN
VIDEO
BNC
1.0 Vp-p (75
Ω)
AUDIO L-R RCA Pin jack
× 2
0.5 Vrms
HDMI
TYPE A Connector
COMPONENT / RGB IN
Y / G
BNC
with sync 1.0 Vp-p (75
Ω)
P
B
/C
B
/B
BNC
0.7 Vp-p (75
Ω)
P
R
/C
R
/R
BNC
0.7 Vp-p (75
Ω)
AUDIO L-R RCA Pin jack
× 2
0.5 Vrms
DVI-D IN
DVI-D 24 Pin
Compliance with DVI Revision 1.0
Content Protection
Compatible with HDCP 1.1
AUDIO
Stereo mini jack (M3)
× 1
0.5 Vrms, Shared with PC IN
PC IN
High-Density Mini D-sub 15 Pin
Y or G with sync 1.0 Vp-p (75
Ω)
Y or G without sync 0.7 Vp-p (75
Ω)
P
B
/ C
B
/ B:0.7 Vp-p (75
Ω)
P
R
/ C
R
/ R:0.7 Vp-p (75
Ω)
HD / VD:1.0 - 5.0 Vp-p (high impedance)
VBS (use HD port)
with picture 1.0 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
AUDIO
Stereo mini jack (M3)
× 1
0.5 Vrms, Shared with DVI-D IN
SERIAL
External Control Terminal
D-sub 9 Pin
D-sub 9 Pin
RS-232C compatible
3D IR TRANSMITTER
for 3D IR TRANSMITTER
3D SHUTTER OUT M3 jack
3D SHUTTER OUT M3 jack
× 1
DC 8V OUT Center plus, for EIAJ 4mm plug
EXT SP
8
Ω, 20 W [10 W + 10 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter
N2QAYB000535
N2QAYB000536 (China)
Batteries
R6 (UM3) Size
× 2
Clamper
TMME289
× 1
Ferrite Core
J0KG00000014
× 2
Dimensions (W
× H × D)
61.2 inch
× 36.5 inch × 3.9 inch / 1,554 mm × 925 mm × 99 mm
Mass (weight)
main unit only
approx. 132.3 lbs / 60.0 kg net
with speakers
approx. 145.5 lbs / 66.0 kg
Notes:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
• This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-2, EN61000-3-3.
11
TH-65PF30W / TH-65PF30T / TH-65PF30G
5 Operating Instructions
12
TH-65PF30W / TH-65PF30T / TH-65PF30G
GPF14DMON chassis series have special function and operation setting facility called Option Menu. This Option Menu is
useful for special function required customers. This should be set at the installation stage.
Note:
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID”
adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the “Volume down” button on main unit together with “R” button on the remote control and hold for more than 5 seconds.
The “Shipping“ menu is displayed and the lock is released when it disappears.
adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the “Volume down” button on main unit together with “R” button on the remote control and hold for more than 5 seconds.
The “Shipping“ menu is displayed and the lock is released when it disappears.
Option Menu for GPF14DMON series
Option menus
default setting
Contents
Weekly Command Timer
---
Sets Weekly Command Timer.
Audio input select
---
Set up the sound when an image input is selected.
Touch Panel settings
---
Set while using Touch Panel (available as an option).
Onscreen display
On
Enable/Disable to display input mode indication after power on and no signal
indication.
indication.
Initial Input
Off
Sets the initial input mode when the power is turned on. Allow input mode selec-
tion while power is on.
tion while power is on.
Initial VOL level
Off
Sets the initial volume level when the power is turned on. Allow Volume control
while power is on.
while power is on.
Maximum VOL Level
Off
Sets the maximum volume to desired level. Volume cannot exceed this level.
Input lock
Off
Fixes the input mode to PC, VIDEO, Component/RGB, HDMI or DVI. Can not
change input mode by input selection key.
change input mode by input selection key.
Button lock
Off
Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volume up/
down)
down)
Remocon User Level
Off
Remote key invalidation.
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, RECALL, Sound mute On/
Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, RECALL, Sound mute On/
Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Off-timer function
Enable
Off-timer operation Enable/Disable.
Initial Power Mode
Normal
Sets the power mode of the unit for when the power recovers from failure or
after plugging off and in again.
after plugging off and in again.
ID select
0
Sets panel ID number when panel is used in
“
Remote ID
”
or
”
Serial ID
”
.
Set value range: 0 - 100.
(Standard value: 0)
(Standard value: 0)
Remote ID
Off
Remote ID function On/Off.
(While the Remote ID on, standard remote function can not control the unit.)
(While the Remote ID on, standard remote function can not control the unit.)
Serial ID
Off
Serial ID function On/Off
Display size
Off
Display size function On/Off
Studio W/B
Off
Studio W/B function On/Off
Studio Gain
Off
Studio Gain function On/Off
Slot power
Off
Off: Power is not transmitted to the slot power.
Auto: Power is transmitted to the slot power only when main power is on.
On: Power is transmitted to the slot power when main power is on or in the
standby state.
Auto: Power is transmitted to the slot power only when main power is on.
On: Power is transmitted to the slot power when main power is on or in the
standby state.
Power On Screen Delay
Off
You can set the power-on delay time of the displays to reduce the power load,
when you press
to turn on the multiple displays that are set together, for
example, on MULTI DISPLAY system.
Set each display’s setting individually.
Set each display’s setting individually.
Clock Display
Off
The clock is displayed at the lower left of the screen when
“
RECALL
“
button is
pressed.
All Aspect
Off
Aspect mode: default/All aspect mode.
Auto Setup
Manual
Sets the operational mode of the automatic position adjustment in the POS./
SIZE menu.
SIZE menu.
Rotate
Off
Rotate function On/Off
Power On Message (No activity power
off)
off)
On
Whether to show/hide No activity power off Precautions at the time of power ON
is set.
is set.
3D Safety Precautions
On
3D Safety Precautions show/hide is set during power ON.
When the setting changes from
When the setting changes from
“
On
“
to
“
Off
“
, the confi rmation screen is dis-
played as below.
Pressing
Pressing
“
YES
“
switches the setting.
Click on the first or last page to see other TH-65PF30W / TH-65PF30T / TH-65PF30G service manuals if exist.