Panasonic TH-65PF30W / TH-65PF30T / TH-65PF30G Service Manual ▷ View online
25
TH-65PF30W / TH-65PF30T / TH-65PF30G
4. Remove each 4 SPONGE(FAN CORNER) from the Fan.
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponges around the Fan.
6. Stick the Fan Sponges around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
Please use a new one when Fan exchange.
9.8.
Removal of P-Board (MAIN)
1. Disconnect the connectors (P9, P11, P16, P25, P34, P35,
P52, P54, P56).
2. Remove 8 screws and then remove P-Board (MAIN).
9.9.
Removal of P-Board (SUS)
1. Disconnect the connectors (P2, P51, P53, P55).
2. Remove 6 screws and then remove P-Board (SUS).
9.10. Removal of AC Inlet Assy
1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord
2. Remove 2 screws ( ) and then remove the AC Cord
Clamper A.
3. Remove 1 screw ( ) and then remove the AC Inlet Assy.
9.11. Removal of H3-Board
1. Disconnect the connector (H37).
2. Remove 2 screw and then remove the Speaker Terminal
2. Remove 2 screw and then remove the Speaker Terminal
Block.
26
TH-65PF30W / TH-65PF30T / TH-65PF30G
3. Remove 2 screws (A) and then remove H3-Board.
9.12. Removal of SU-Board and SD-
Board
1. Remove the Duct Barrier (B).
2. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
SD11).
3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 5 screws ( ).
5. Remove 4 screws ( ) and then remove SU-Board and
4. Remove 5 screws ( ).
5. Remove 4 screws ( ) and then remove SU-Board and
SD-Board.
9.13. Removal of SC-Board
1. Remove the Fan-Duct Barrier (B).
(Refer to Removal of SU-Board and SD-Board)
2. Disconnect the connectors (SC2, SD42, SD46, SU41).
3. Remove the flexible cable from the connector (SC20).
4. Remove 9 screws ( ).
3. Remove the flexible cable from the connector (SC20).
4. Remove 9 screws ( ).
27
TH-65PF30W / TH-65PF30T / TH-65PF30G
5. Remove 4 screws ( ) and then remove SC-Board.
9.14. Removal of SS-Board
1. Remove 3 screws and then remove the HX Sub Metal.
2. Disconnect the connectors (A5, A11, A13, A16, A22,
A37).
3. Remove the flexible cables from the connectors (A1,
A15).
4. Remove 4 screws ( ) and then remove the A-Board
Block.
Note: when fixing A-Board Block
• Put the flexible Cable between the Fixed Metal and A-
Board when Connect the flexible Cable to the connector
(A1).
(A1).
5. Remove the Fan Block (C).
(Refer to remove of Fan Block).
6. Disconnect the connector (SS11).
7. Remove the flexible cables from the connectors (SS33,
7. Remove the flexible cables from the connectors (SS33,
SS64, SS65, SS66).
8. Remove 7 screws ( ).
9. Remove 3 screws ( ) and then remove SS-Board.
9. Remove 3 screws ( ) and then remove SS-Board.
9.15. Removal of SS2-Board
1. Remove the SS-Board.
(Refer to remove of SS-Board).
2. Remove the flexible cable from the connector (SS69).
3. Remove 2 screws ( ) and then remove SS2-Board.
3. Remove 2 screws ( ) and then remove SS2-Board.
9.16. Removal of C1-Board
1. Remove 15 screws ( ).
28
TH-65PF30W / TH-65PF30T / TH-65PF30G
2. Remove 6 screws ( ) and then remove Contact Metal
(bottom).
3. Remove the flexible cable from the connector (C10).
4. Remove 3 screws ( ).
5. Remove the flexible cables from the connectors (CB1,
4. Remove 3 screws ( ).
5. Remove the flexible cables from the connectors (CB1,
CB2, CB3) and then remove C1-Board.
9.17. Removal of C2-Board
1. Remove the Contact Metal (Lower).
(Refer to remove of C1-Board).
2. Remove the flexible cables from the connectors (C20,
C21, C26).
3. Remove 4 screws ( ).
4. Remove remove the flexible cables from the connectors
4. Remove remove the flexible cables from the connectors
(CB4, CB5, CB6, CB7, CB8, CB9) and then remove C2-
Board.
Board.
9.18. Removal of C3-Board
1. Remove the Fan Block (C).
(Refer to remove of Fan).
2. Remove 6 screws and then remove the Hanger Assy L
and the Stand Pole Bracket Assy (L).
1. Remove the Contact Metal (Lower).
(Refer to remove of C1-Board).
2. Disconnect the connector (C35).
3. Remove the flexible cables from the connectors (C31,
3. Remove the flexible cables from the connectors (C31,
C33, C36).
4. Remove the flexible cables from the connectors (CB10,
CB11, CB12, CB13, CB14, CB15).
5. Remove 4 screws ( ) and then remove C3-Board.
9.19. Removal of S1-Board
1. Remove 2 screws (B) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.
Click on the first or last page to see other TH-65PF30W / TH-65PF30T / TH-65PF30G service manuals if exist.