Panasonic TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E Service Manual ▷ View online
7.17. Removal of Plasma Panel
1. Remove 2 screws ( ) and then remove the Ferrite Core
from the Stand Block(L, R).
2. Remove 12 screws ( ) and then remove the Stand Block(L,
R).
3. Disconnect the connectors(DS1, DS4, DS6, DS7).
4. Remove 4 screws and then remove the Slot Block.
5. Disconnect the connectors(DS2, DS8, DS15).
4. Remove 4 screws and then remove the Slot Block.
5. Disconnect the connectors(DS2, DS8, DS15).
6. Disconnect the connector(DN6).
7. Remove the Flexible Cable from the connector(DN1).
8. Remove 4 screws and then remove the DN-Board Block.
7. Remove the Flexible Cable from the connector(DN1).
8. Remove 4 screws and then remove the DN-Board Block.
9. Disconnect the connectors(P2, P9, P11, P12, P25).
10. Remove 10 screws ( ) and then remove P-Board.
11. Remove 4 screws ( ) and then remove the AC-Inlet Block.
11. Remove 4 screws ( ) and then remove the AC-Inlet Block.
12. Disconnect the connector(D20).
13. Remove the Flexible Cables from the connectors(D31,
13. Remove the Flexible Cables from the connectors(D31,
D32).
14. Remove 4 screws and then remove D-Board.
15. Remove 2 screws ( ) and then remove the Holder.
15. Remove 2 screws ( ) and then remove the Holder.
16. Remove SU-Board and SD-Board.
(Refer to Removal of SU-Board and SD-Board)
17. Remove 6 screws ( ) and then remove SC-Board.
18. Remove 2 screws ( ) and then remove the Plate.
18. Remove 2 screws ( ) and then remove the Plate.
25
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
19. Disconnect the connectors(SS23, SS34).
20. Remove the Flexible Cables from the connectors(SS53A,
20. Remove the Flexible Cables from the connectors(SS53A,
SS54A, SS55A, SS56A).
21. Remove 6 screws ( ) and then remove SS-Board.
22. Remove 1 screw ( ) and then remove the Ferrite Core.
22. Remove 1 screw ( ) and then remove the Ferrite Core.
23. Remove the Flexible Cable from the connectors(C10, C20).
24. Remove 6 screws ( ).
25. Remove the 6 Spacers and Spacer Rings from the Plasma
Panel.
Caution:
· Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel,
and install Spacer and Spacer Ring in an original
installation place after exchanging the Plasma
Panel.
and install Spacer and Spacer Ring in an original
installation place after exchanging the Plasma
Panel.
26. Lift up the bottom of Plasma Panel to the arrow1 direction.
27. Pull the Plasma Panel to the arrow2 direction and then
27. Pull the Plasma Panel to the arrow2 direction and then
remove the Plasma Panel.
26
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
8 Location of Lead Wiring
8.1. Wiring for the 37 inch model
8.1.1. Lead Wiring (1)
The lead wiring is dressed as shown in figure.
27
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
8.1.2. Lead wiring (2)
The lead wiring is dressed as shown in figure.
28
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
Click on the first or last page to see other TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E service manuals if exist.