Panasonic TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E Service Manual ▷ View online
7.10. Removal of SC-Board
1. Disconnect the connectors(SU45, SD46).
2. Remove 3 screws ( ) and then slide SU-Board and SD-
2. Remove 3 screws ( ) and then slide SU-Board and SD-
Board to the left.
3. Disconnect the connectors(SC2, SC20).
4. Remove 6 screws and then remove SC-Board.
4. Remove 6 screws and then remove SC-Board.
7.11. Removal of SS-Board
1. Disconnect the connectors(SS11, SS12, SS23, SS34).
2. Remove the Flexible Cables from the connectors(SS53A,
2. Remove the Flexible Cables from the connectors(SS53A,
SS54A, SS55A, SS56A)
3. Remove 6 screws and then remove SS-Board.
7.12. Removal of C1, C2-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 2 screws ( ) and then remove the Ferrite Core
from the Stand Block(L, R).
3. Remove 12 screws ( ) and then remove the Stand Block(L,
R).
21
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
7.12.1. Removal of C1-Board
1. Remove the Flexible Cables from the connectors(C10,
C11).
2. Remove 8 screws ( ) and then remove the Flexible Cables
from the connectors(CB1, CB2, CB3, CB4).
3. Remove 4 screws ( ) and then remove C1-Board.
7.12.2. Removal of C2-Board
1. Remove 4 screws ( ) and then remove the AC-Inlet Block.
2. Remove the Flexible Cables from the connectors(C20 ,
C21, C23).
3. Remove 8 screws ( ) and then remove the Flexible Cables
from the connectors(CB5, CB6, CB7, CB8).
4. Remove 4 screws ( ) and then remove C2-Board.
7.13. Removal of S-Board
1. Disconnect the connector(S1).
2. Remove 2 screws(A) and then remove S-Board Block.
3. Remove 2 screws(B) and then remove S-Board.
3. Remove 2 screws(B) and then remove S-Board.
22
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
7.14. Removal of GK-Board
1. Remove 2 screws(C) and then remove the Plate(A).
2. Remove 2 screws(D).
3. Disconnect the connector(GK3) and then remove GK-
2. Remove 2 screws(D).
3. Disconnect the connector(GK3) and then remove GK-
Board.
7.15. Removal of K-Board
1. Remove 2 screws.
2. Then remove K-Board and disconnect the connector(K1).
2. Then remove K-Board and disconnect the connector(K1).
7.16. Removal of Escutcheon and
the Front Glass
1. Disconnect the Relay connectors (DS2, DS8, DS15).
2. Disconnect the connector(S1).
2. Disconnect the connector(S1).
3. Disconnect the connector(DS7).
4. Remove 2 screws ( ) and then remove the Ferrite core
4. Remove 2 screws ( ) and then remove the Ferrite core
from the Stand Block(L, R).
5. Remove 10 screws ( ).
6. Lift up the bottom of Plasma Panel to the arrow1 direction.
7. Pull the Plasma Panel to the arrow2 direction and then
7. Pull the Plasma Panel to the arrow2 direction and then
remove the Plasma Panel.
8. Remove the S-Board Block.
(Refer to Removal of S-Board)
23
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
9. Remove K-Board.
(Refer to Removal of K-Board)
10. Remove GK-Board.
(Refer to Removal of GK-Board)
11. Remove 5 screws(F) and then remove the Plate(B).
12. Remove 2 screws(G) and then remove the Control Panel.
12. Remove 2 screws(G) and then remove the Control Panel.
13. Remove 1 screw(H) and then remove the Spring.
14. Remove 3 hooks and then remove the Door.
15. Remove 4 hooks and then remove the Power SW.
14. Remove 3 hooks and then remove the Door.
15. Remove 4 hooks and then remove the Power SW.
16. Remove screws and then remove the Glass Fixed Plate (L,
R, Upper, Lower).
Removed number of screws:
Removed number of screws:
12 screws (L, R) ( )
5 screws (Upper) ( )
7 screws (Lower) ( )
5 screws (Upper) ( )
7 screws (Lower) ( )
17. Remove the Front Glass.
18. Remove 2 screws ( ) and then remove the Plate(L, R).
19. Remove 8 screws ( ) and then remove the Speaker (L, R).
18. Remove 2 screws ( ) and then remove the Plate(L, R).
19. Remove 8 screws ( ) and then remove the Speaker (L, R).
24
TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E
Click on the first or last page to see other TH-37PR10B / TH-37PR10E / TH-42PR10B / TH-42PR10E service manuals if exist.