Panasonic TH-103PF10WL Service Manual ▷ View online
TH-103PF10WK/TK/RK
47
7.42. Removal of CD-Board
7.42.1. Removal of CD-Board (A)
1. Remove the flexible cables from the connectors (CD1,
CD2).
2. Remove 2 screws and then remove CD-Board (A).
7.42.2. Removal of CD-Board (B)
1. Remove the flexible cables from the connectors (CD1,
CD2).
2. Remove 2 screws and then remove CD-Board (B).
7.42.3. Removal of CD-Board (C)
1. Remove the flexible cables from the connectors (CD1,
CD2).
2. Remove 2 screws and then remove CD-Board (C).
7.42.4. Removal of CD-Board (D)
1. Remove the Fan Block (H).
(Refer to Removal of the Fan)
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (D).
7.42.5. Removal of CD-Board (E)
1. Remove 2 screws and then remove the Rear Cover Angle
(H).
TH-103PF10WK/TK/RK
48
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (E).
7.42.6. Removal of CD-Board (F)
1. Remove the Fan Block (J).
(Refer to Removal of Fan)
2. Remove the flexible cables from the connectors (CD1,
CD2).
3. Remove 2 screws and then remove CD-Board (F).
7.43. Removal of AC Inlet
1. Remove 2 screws and then remove the AC Inlet Cover.
2. Disconnect a connector (F1).
3. Remove 3 screws and then remove the AC-Inlet.
3. Remove 3 screws and then remove the AC-Inlet.
7.44. Removal of Cabinet and Front
Glass
7.44.1. Removal of Front Glass
1. Disconnect the connectors (DS15, SC34).
2. Remove 4 screws, and then side the Side Power Unit
upward.
3. Remode the side Power Unit.
4. Remove 44 screws and then remove cabinet with front
glass.
TH-103PF10WK/TK/RK
49
(Note)
• When removing the Cabinet with Front Glass, take
care not to damage the flexible cable of the Plasma
Panel circumference.
Panel circumference.
5. Remove 26 screws ( ) (left and right side) and 18
screws ( ) (top and bottom side) and then remove the
Fixed Angles (A), (B), (C), (D).
Fixed Angles (A), (B), (C), (D).
6. Remove the Front Glass.
(Note)
• When removing the Front Glass from Cabinet, there is a
risk of the glass center bending damage.
• Be sure to lift the instruction six positions of the figure,
when remove the Front Glass.
Note: When replacing the Front Glass
• The sponges for the Front Glass cannot be recycled.
• When replacing the Front Glass, use the new sponges.
• When replacing the Front Glass, use the new sponges.
TH-103PF10WK/TK/RK
50
7.44.2.
Removal of Cabinet
1. Remove the Front Glass.
(Refer to Removal of Front Glass.)
7.44.2.1. Removeval of Cabinet Top
1. Remove each 5 screws ( ).
2. Remove each 2 screws ( ) and then remove the Con-
2. Remove each 2 screws ( ) and then remove the Con-
nection Angles (A), (AS), (B), (BS).
3. Remove the Cabinet Top.
7.44.2.2. Removeval of Cabinet Bottom
1. Remove each 5 screws ( )
2. Remove each 2 screws ( ) and then remove the Con-
2. Remove each 2 screws ( ) and then remove the Con-
nection Angles (A), (AS), (B), (BS).
3. Remove the Cabinet Bottom.
7.44.2.3. Removeval of Cabinet Right
1. Remove each 5 screws ( ).
2. Remove each 2 screws ( ) and then remove the Con-
2. Remove each 2 screws ( ) and then remove the Con-
nection Angles (A), (AS), (B), (BS).
3. Remove the Cabinet Right.
Click on the first or last page to see other TH-103PF10WL service manuals if exist.