Panasonic TH-103PF10WL Service Manual ▷ View online
TH-103PF10WK/TK/RK
39
Note:
• The Sponge (of Fans) is not re-useable.
Please use a new one when Fan exchange.
7.26. Removal of C1-Board
1. Remove 2 screws ( ) of Side Angle (R).
2. Remove 6 screws ( ) and then remove the Reinforce-
2. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (A).
3. Remove 4 screws of the flexible cable.
4. Disconnect the connector (C14).
5. Remove the flexible cables from the connectors (CA1,
4. Disconnect the connector (C14).
5. Remove the flexible cables from the connectors (CA1,
CA2, C11).
6. Remove 4 screws and then remove C1-Board.
7.27. Removal of C2-Board
1. Remove the Fan Block (A), (B).
(Refer to Removal of Fan)
2. Remove the Eye Bolt and Eye Bolt Cover.
3. Remove 5 screws and then remove the Rear Cover Angle
3. Remove 5 screws and then remove the Rear Cover Angle
(A).
TH-103PF10WK/TK/RK
40
4. Remove the Reinforcement Angle (A).
(Refer to Removal of C1-Board)
5. Remove 6 screws of the flexible cable.
6. Remove the flexible cables from the connectors (CA3,
6. Remove the flexible cables from the connectors (CA3,
CA4, CA5, C20, C21, C23).
7. Disconnect the connectors (C22, C24).
8. Remove 6 screws and then remove C2-Board.
7.28. Removal of C3-Board
1. Remove the Eye Bolt.
2. Remove 5 screws and then remove the Rear Cover Angle
2. Remove 5 screws and then remove the Rear Cover Angle
(C).
3. Remove 6 screws and then remove the Reinforcement
Angle (C).
4. Remove 6 screws of the flexible cable.
5. Remove the flexible cables from the connectors (CA6,
5. Remove the flexible cables from the connectors (CA6,
CA7, CA8, C31, C32).
6. Disconnect the connector (C34).
7. Remove 5 screws and then remove C3-Board.
TH-103PF10WK/TK/RK
41
7.29. Removal of C4-Board
1. Remove the Rear Cover Angle (C).
(Refer to Removal of C3-Board)
2. Remove the Reinforcement Angle (C).
(Refer to Removal of C3-Board)
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CA9,
4. Remove the flexible cables from the connectors (CA9,
CA10, CA11, C40, C41, C42).
5. Disconnect the connectors (C43, C44).
6. Remove 5 screws and then remove C4-Board.
7.30. Removal of C5-Board
1. Remove the Eye Bolt and Eye Bolt Cover.
2. Remove 15 screws ( ) and then remove the Fan (C), (D)
2. Remove 15 screws ( ) and then remove the Fan (C), (D)
and Fan Block (E), (F).
3. Remove 5 screws ( ) and then remove the Rear Cover
Angle (E).
4. Remove 2 screws ( ) of Side Angle (L).
5. Remove 6 screws ( ) and then remove the Reinforce-
5. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (E).
6. Remove 6 screws of the flexible cable.
7. Remove the flexible cables from the connectors (CA12,
7. Remove the flexible cables from the connectors (CA12,
CA13, CA14, C50, C51, C53).
8. Disconnect the connectors (C52, C54).
9. Remove 6 screws and then remove C5-Board.
TH-103PF10WK/TK/RK
42
7.31. Removal of C6-Board
1. Remove the Fan (D).
(Refer to Removal of C5-Board)
2. Remove the Reinforcement Angle (E).
(Refer to Removal of C5-Board)
3. Remove 4 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CA15,
4. Remove the flexible cables from the connectors (CA15,
CA16, C61).
5. Disconnect the connector (C64).
6. Remove 4 screws and then remove C6-Board.
7.32. Removal of C7-Board
1. Remove 7 screws and then remove the Fan Block (G)
and Fan (K).
2. Remove 2 screws ( ) and then remove the Rear Cover
Angle (H).
3. Remove the Eye Bolt Covers.
4. Remove 5 screws ( ) and then remove the Rear Cover
4. Remove 5 screws ( ) and then remove the Rear Cover
Angle (F).
5. Remove 2 screws ( ) of Side Angle (L).
6. Remove 6 screws ( ) and then remove the Reinforce-
6. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (F).
Click on the first or last page to see other TH-103PF10WL service manuals if exist.