Panasonic TH-103PF10WL Service Manual ▷ View online
TH-103PF10WK/TK/RK
19
6.1.2.
Power LED Blinking timing chart
1. Subject
Information of LED Blinking timing chart.
2. Contents
When an abnormality has occurred to the unit, the protection circuit operates and resets to the stand by mode. At this time,
the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
3. Remarks
Above Fan function is operated during the fans are installed.
About blinking LED
About blinking LED
TH-103PF10WK/TK/RK
20
6.2.
No Power
First check point
There are following 3 states of No Power indication by power LED.
There are following 3 states of No Power indication by power LED.
1. No lit.
2. Green is lit then turns red blinking a few seconds later.
3. Only red is lit.
2. Green is lit then turns red blinking a few seconds later.
3. Only red is lit.
6.3.
No Picture
TH-103PF10WK/TK/RK
21
6.4.
Local screen failure
Plasma display may have local area failure on the screen. Fig - 1 is the possible defect P.C.B. for each local area.
Fig - 1
TH-103PF10WK/TK/RK
22
7 Disassembly and Assembly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off for discharge from electrolysis capacitors.
• and marks indicate screw positions.
• and marks indicate screw positions.
7.1.
Rear Cover and Board
Rear Cover required to remove for each board exchange.
Board Name
Rear Cover
D-Board
D
DS-Board
B
SS-Board
F
SC-Board
A, B, C
SC2-Board
A, C
SU-Board
A
SM-Board
A
SD-Board
A
C1-Board
A
C2-Board
A, B
C3-Board
B, D
C4-Board
B, D
C5-Board
D, F
C6-Board
F
C7-Board
F
C8-Board
E, F
C9-Board
C, E
CX-Board
C, E
CY-Board
A, C
CZ-Board
A
H5-Board
B
S1-Board
A
SS2-Board
F
SS3-Board
F
V1-Board
A, B, C, D, E, F
V2-Board
A
V3-Board
A, B, C, D, E, F
Click on the first or last page to see other TH-103PF10WL service manuals if exist.