Panasonic TH-103PF10WL Service Manual ▷ View online
TH-103PF10WK/TK/RK
15
5.2.
IIC mode structure (following items value is sample data)
TH-103PF10WK/TK/RK
16
5.3.
Option Setting
TH-103PF10WK/TK/RK
17
GPH10D chassis series have special function and operation setting facility called Option Menu. This Option Menu is use-
ful for special function required customers. This should be set at the installation stage.
Note:
When both main unit buttons and remote control are disabled due to the "Button lock", "Remocon User level" or "Remote ID"
adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the "Volume down" button on main unit together with "R" button on the remote control and hold for more than 5 seconds.
adjustments, set all the values "Off" so that all the buttons are enabled again.
Press the "Volume down" button on main unit together with "R" button on the remote control and hold for more than 5 seconds.
The "SHIPPING" menu is displayed and the lock is released when it disappears.
Option Menu for GPF10D series
Option menus
default setting
Contents
Weekly Command Timer
---
Off-timer Sets Weekly Command Timer. Enable/Disable.
Onscreen display
On
Enable/Disable to display input mode indication after power on and no signal
indication.
indication.
Initial INPUT
Off
Sets the initial input mode when the power is turned on. Allow input mode selec-
tion while power is on.
tion while power is on.
Initial VOL level
Off
Sets the initial volume level when the power is turned on. Allow Volume control
while power is on.
while power is on.
Maximum VOL Level
Off
Sets the maximum volume to desired level. Volume cannot exceed this level.
INPUT lock
Off
Fixes the input mode to AV, Component/RGB or PC. Can not change input
mode by input selection key
mode by input selection key
Button lock
Off
Enable/Disable bottom operation buttons (Input, Menu, Enter and/or volume up/
down)
down)
Remocon User Level
Off
Remote key invalidation.
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, Direct input, Status, Sur-
round, Sound mute On/Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Off: Valid key is all key of remote.
User1: Valid key are only Stand-by (ON/OFF), Input, Direct input, Status, Sur-
round, Sound mute On/Off, and volume adjustment.
User2: Valid key is only Stand-by (ON/OFF).
User3: All keys are null and void
Advanced PIP
Off
Off: Sets normal two screen display mode.
On: Sets Advanced PIP mode.
On: Sets Advanced PIP mode.
Off-timer function
Enable
Off-timer operation Enable/Disable.
Initial Power Mode
Normal
Sets the power mode of the unit for when the power recovers from failure or
after plugging off and in again.
after plugging off and in again.
ID select
0
Set ID number from 0 to 100.
Remote ID
Off
Remote ID function On/Off.
(While the Remote ID on, standard remote function can not control the unit.)
(While the Remote ID on, standard remote function can not control the unit.)
Serial ID
Off
Serial ID function On/Off
Display size
Off
Adjusts the image display size on screen.
On: Sets the image display size approximately 95% of the normal image dis-
play.
On: Sets the image display size approximately 95% of the normal image dis-
play.
Studio W/B
Off
Set warm mode color temperature to 3,200 Kelvin.
Studio Gain
Off
Sharpens the contrast for a better view when a part of the image is too light to
see
see
Slot power
Off
Sets the slot power mode while the power is turned on.
Allow Optional Terminal Board insert Slots while power is on.
Allow Optional Terminal Board insert Slots while power is on.
Power On Screen Delay
Off
You can set the power-on delay time of the displays to reduce the power load,
when you press
to turn on the multiple displays that are set together, for
example, on MULTI DISPLAY system.
Set each display’fs setting individually.
Set each display’fs setting individually.
V. Installation
Off
V. Installation function On/Off (Not used)
Rotate
Off
The image rotates 180 degrees (up-down)
Serial Slot Select
Slot1
Selects the slot which communicates serial.
Note: The setting of an external command can be set only from the fixed serial
terminal.
Note: The setting of an external command can be set only from the fixed serial
terminal.
TH-103PF10WK/TK/RK
18
6 Troubleshooting Guide
6.1.
Self Check
6.1.1.
Display Indication
1. Self-check is used to automatically check the bus line controlled circuit of the Plasma display.
2. To get into the Self-check mode, press the volume down button on the customer controls at the side of the set, at the same
2. To get into the Self-check mode, press the volume down button on the customer controls at the side of the set, at the same
time pressing the OFF-TIMER button on the remote control, and the screen will show.
If the IIC ports have been checked and found to be incorrect.
Or not located then " - - " will appear in place of " OK ".
“ 01 “ in the line of the “ PTCT ” means the number of blinks of the Power LED is 1. (Refer to 7.1.2)
“ H09 “ in the line of the “ PTCT ” is the error code.
Or not located then " - - " will appear in place of " OK ".
“ 01 “ in the line of the “ PTCT ” means the number of blinks of the Power LED is 1. (Refer to 7.1.2)
“ H09 “ in the line of the “ PTCT ” is the error code.
To exit Self Check mode, switch off the main power.
Note:
The line of the “ PTCT ” displays when you get into the Self-check mode for the first time only after the Power LED blinks.
Click on the first or last page to see other TH-103PF10WL service manuals if exist.