Panasonic TH-103PF10WL Service Manual ▷ View online
TH-103PF10WK/TK/RK
43
7. Remove 4 screws of the flexible cable.
8. Remove the flexible cables from the connectors (CB15,
8. Remove the flexible cables from the connectors (CB15,
CB16, C71).
9. Disconnect the connector (C74).
10. Remove 4 screws and then remove C7-Board.
7.33. Removal of C8-Board
1. Remove the Fan Block (G) and Fan (K).
(Refer to Removal of C7-Board)
2. Remove the Rear Cover Angle (F), (H).
(Refer to Removal of C7-Board)
3. Remove the Reinforcement Angle (F).
(Refer to Removal of C7-Board)
4. Remove 6 screws of the flexible cable.
5. Remove the flexible cables from the connectors (CB12,
5. Remove the flexible cables from the connectors (CB12,
CB13, CB14, C80, C81, C83).
6. Disconnect the connectors (C82, C84, C88).
7. Remove 6 screws and then remove C8-Board.
7.34. Removal of C9-Board
1. Remove 4 screws ( ) and then the Rear Cover Angle
(G), (H).
2. Remove 5 screws ( ) and then remove the Rear Cover
Angle (D).
3. Remove 6 screws and then remove the Reinforcement
Angle (D).
TH-103PF10WK/TK/RK
44
4. Remove 6 screws of the flexible cable.
5. Remove the flexible cables from the connectors ( C90,
5. Remove the flexible cables from the connectors ( C90,
C91, C93,CB9, CB10, CB11).
6. Disconnect the connectors (C92, C94).
7. Remove 5 screws and then remove C9-Board.
7.35. Removal of CX-Board
1. Remove the Rear Cover Angle (D), (G), (H).
(Refer to Removal of C9-Board)
2. Remove the Reinforcement Angle (D).
(Refer to Removal of C9-Board)
3. Remove 6 screws of the flexible cable.
4. Remove the flexible cables from the connectors (CB6,
4. Remove the flexible cables from the connectors (CB6,
CB7, CB8, CX1, CX2).
5. Disconnect the connector (CX4).
6. Remove 5 screws and then remove CX-Board.
7.36. Removal of CY-Board
1. Remove 2 screws ( ) and then the Rear Cover Angle
(G).
2. Remove 2 Eye Bolt Covers.
3. Remove 5 screws ( ) and then remove the Rear Cover
3. Remove 5 screws ( ) and then remove the Rear Cover
Angle (B).
4. Remove 2 screws ( ) of Side Angle (R).
TH-103PF10WK/TK/RK
45
5. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (B).
6. Remove 6 screws of the flexible cable.
7. Remove the flexible cables from the connectors (CB3,
7. Remove the flexible cables from the connectors (CB3,
CB4, CB5, CY0, CY1, CY3).
8. Disconnect the connectors (CY2, CY4).
9. Remove 6 screws and then remove CY-Board.
7.37. Removal of CZ-Board
1. Remove the Reinforcement Angle (B).
(Refer to Removal of CY-Board)
2. Remove 4 screws of the flexible cable.
3. Disconnect the connector (CZ4).
3. Disconnect the connector (CZ4).
4. Remove the flexible cables from the connectors (CB1,
CB2, CZ1).
5. Remove 4 screws and then remove CZ-Board.
7.38. Removal of DR1-Board (A)
1. Disconnect the Fan relay connectors.
2. Remove 4 screws and then remove the Fan Block (B).
2. Remove 4 screws and then remove the Fan Block (B).
3. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
4. Remove 5 screws and then remove the DR1-Board (A).
4. Remove 5 screws and then remove the DR1-Board (A).
TH-103PF10WK/TK/RK
46
7.39. Removal of DR1-Board (B)
Attaching short jumper to connector (DR6).
Attach Short Jumper to the connector (DR6) when replacing
DR1-Board.
DR1-Board.
1. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
2. Remove 5 screws and then remove DR1-Board (B).
3. Remove Short Jumper attaching to the connector (DR6)
2. Remove 5 screws and then remove DR1-Board (B).
3. Remove Short Jumper attaching to the connector (DR6)
on DR1-Board you removed and attach it to the connector
(DR6).
(DR6).
7.40. Removal of DR2-Board (A)
1. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
2. Remove 5 screws and then remove DR2-Board (A).
7.41. Removal of DR2-Board (B)
Attaching short jumper to connector (DR16).
Attach Short Jumper to the connector (DR16) when replacing
DR2-Board.
DR2-Board.
1. Remove 4 screws and then remove Fan Block (E).
2. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
3. Remove 5 screws and then remove DR2-Board (B).
4. Remove Short Jumper attaching to the connector (DR16)
4. Remove Short Jumper attaching to the connector (DR16)
on DR2-Board you removed and attach it to the connector
(DR16).
(DR16).
Click on the first or last page to see other TH-103PF10WL service manuals if exist.