Panasonic TH-103PB1E Service Manual ▷ View online
41
TH-103PB1E
15. Stick the Fan Sponge around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
Please use a new one when Fan exchange.
8.19. Removal of Speaker Assy
1. Remove 4 screws ( ).
2. Remove 2 screws ( ) and then remove the Speaker
2. Remove 2 screws ( ) and then remove the Speaker
Blocks.
3. Disconnect the Speaker lead.
• Push the speaker terminal hook and pull out the speaker
lead (+).
4. Remove the Speaker Assy from the Speaker Bracket (L,
R) Assy.
8.20. Removal of C1-Board (upper)
1. Remove the Fan block (2).
(Refer to Removal of Fan)
2. Remove the flexible cable from the connector (C11).
3. Remove 4 screws ( ) and then remove the flexible
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2).
4. Remove 4 screws ( ) and then remove C1-Board
(upper).
42
TH-103PB1E
8.21. Removal of C2-Board (upper)
1. Remove the Fan block (3).
(Refer to Removal of Fan)
2. Remove the Eye Bolt (right) and Eye Bolt Cover.
3. Remove 3 screws ( ).
4. Remove 2 screws ( ) and then remove the Rear Cover
3. Remove 3 screws ( ).
4. Remove 2 screws ( ) and then remove the Rear Cover
Fixing Metal (upper_right).
5. Remove the flexible cables from the connectors (C20,
C21).
6. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA3, CA4, CA5).
7. Remove 6 screws ( ) and then remove C2-Board
(upper).
8.22. Removal of C3-Board (upper)
1. Remove the Fan block (3).
(Refer to Removal of Fan)
2. Remove the Eye Bolt (center).
3. Remove 3 screws ( ).
4. Remove 2 screws ( ) and then remove the Rear Cover
3. Remove 3 screws ( ).
4. Remove 2 screws ( ) and then remove the Rear Cover
Fixing Metal (upper_center).
5. Remove the flexible cables from the connectors (C30,
C31, C32).
6. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA6, CA7, CA8).
7. Remove 6 screws ( ) and then remove the C3-Board
(upper).
43
TH-103PB1E
8.23. Removal of C4-Board (upper)
1. Remove the Rear Cover Fixing Metal (upper_center).
(Refer to Removal of C3-Board (upper))
2. Remove the flexible cables from the connectors (C40,
C41, C42).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA9, CA10, CA11).
4. Remove 6 screws ( ) and then remove C4-Board
(upper).
8.24. Removal of C5-Board (upper)
1. Remove the Fan blocks (4, 5).
(Refer to Removal of Fan)
2. Remove the Eye Bolt (left) and Eye Bolt Cover.
3. Remove 3 screws ( ).
3. Remove 3 screws ( ).
4. Remove 2 screws ( ) and then remove the Rear Cover
Fixing Metal (upper_left).
5. Disconnect the connector (C55).
6. Remove the flexible cables from the connectors (C50,
6. Remove the flexible cables from the connectors (C50,
C51).
7. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA12, CA13, CA14).
8. Remove 6 screws ( ) and then remove C5-Board
(upper).
8.25. Removal of C6-Board (upper)
1. Remove the Fan block (4).
(Refer to Removal of Fan)
44
TH-103PB1E
2. Remove the flexible cable from the connector (C61).
3. Remove 4 screws ( ) and then remove the flexible
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA15, CA16).
4. Remove 4 screws ( ) and then remove C6-Board
(upper).
8.26. Removal of C1-Board (lower)
1. Remove the Speaker Block (left).
(Refer to Removal of Speaker Assy)
2. Remove the flexible cables from the connector (C11).
3. Remove 4 screws ( ) and then remove the flexible
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2).
4. Remove 4 screws ( ) and then remove C1-Board (lower).
8.27. Removal of C2-Board (lower)
1. Remove the Speaker Block (left).
(Refer to Removal of Speaker Assy)
2. Remove 2 screws and the remove the Rear Cover Fixing
Metal H Assy (left).
3. Remove the Eye Bolt Cover on the Rear Cover Fixing
Metal (lower_left).
4. Remove 3 screws ( ).
5. Remove 2 screws ( ) and then remove the Rear Cover
5. Remove 2 screws ( ) and then remove the Rear Cover
Fixing Metal (lower_left).
6. Remove the flexible cables from the connectors (C20,
C21).
7. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA3, CA4, CA5).
8. Remove 6 screws ( ) and then remove C2-Board (lower).
Click on the first or last page to see other TH-103PB1E service manuals if exist.