Panasonic TH-103PB1E Service Manual ▷ View online
37
TH-103PB1E
4. Remove 2 screws ( ) and then remove the Speaker
Block (R).
5. Disconnect the Speaker lead.
• Push the speaker terminal hook and pull out the speaker
lead (+).
6. Remove 1 screw ( ).
7. Remove 4 screws ( ).
8. Remove 2 screws ( ) and then remove the Side Hold
7. Remove 4 screws ( ).
8. Remove 2 screws ( ) and then remove the Side Hold
Unit.
9. Remove the flexible cables from the connectors (SD1,
SD2, SD3, SD4, SD12).
10. Disconnect the connector (SD44).
11. Remove 5 screws ( ).
12. Remove 3 screws ( ) and then remove SD-Board.
8.14. Removal of SC-Board
1. Remove SU-Board.
(Refer to Removal of SU-Board)
2. Remove SD-Board.
(Refer to Removal of SD-Board)
3. Disconnect the connectors (SM41, SM42, SM46).
4. Remove 6 screws ( ).
5. Remove 4 screws ( ) and then turn over SM-Board to the
4. Remove 6 screws ( ).
5. Remove 4 screws ( ) and then turn over SM-Board to the
left.
Note:
Note:
Do not damage the Flexible Cables of SM-Board, and
the parts on SC-Board.
the parts on SC-Board.
38
TH-103PB1E
6. Disconnect the connector (SC2).
7. Remove the flexible cable from the connector (SC20).
8. Remove 9 screws and then remove SC-Board.
7. Remove the flexible cable from the connector (SC20).
8. Remove 9 screws and then remove SC-Board.
8.15. Removal of SS2-Board
1. Remove 1 screw ( ).
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Side Hold
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Side Hold
Unit.
4. Disconnect the connectors (SS34, SS35).
5. Remove the flexible cables from the connectors (SS51,
5. Remove the flexible cables from the connectors (SS51,
SS52, SS53, SS54).
6. Remove 6 screws and then remove SS2-Board.
8.16. Removal of SS3-Board
1. Remove 1 screw ( ).
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Side Hold
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Side Hold
Unit.
4. Disconnect the connectors (SS32, SS33).
5. Remove the flexible cables from the connectors (SS59,
5. Remove the flexible cables from the connectors (SS59,
SS60, SS61, SS62).
39
TH-103PB1E
6. Remove 6 screws and then remove SS3-Board.
8.17. Removal of SS-Board
• Ve adjustment is performed by IIC mode after SS board
exchange.
1. Disconnect the Fan Joint Connector.
2. Remove 3 screws ( ).
3. Remove 1 screw ( ) and then remove the Fan Block (5)
2. Remove 3 screws ( ).
3. Remove 1 screw ( ) and then remove the Fan Block (5)
and Duct Barrier H.
4. Disconnect the connectors (SS11, SS21, SS32, SS33,
SS34, SS35).
5. Remove the flexible cables from the connectors (SS55,
SS56, SS57, SS58).
6. Remove 13 screws and then remove SS-Board.
8.18. Removal of Fan
1. Disconnect the Fan Joint Connectors.
2. Remove 7 screws ( ).
3. Remove 2 screws ( ).
4. Remove 1 screw ( ) and then remove the Fan Blocks (1,
2. Remove 7 screws ( ).
3. Remove 2 screws ( ).
4. Remove 1 screw ( ) and then remove the Fan Blocks (1,
2).
40
TH-103PB1E
5. Disconnect the Fan Joint Connectors.
6. Remove 1 screw ( ).
7. Remove 1 screw ( ).
8. Remove 2 screws ( ) and then remove the Fan Block (3).
6. Remove 1 screw ( ).
7. Remove 1 screw ( ).
8. Remove 2 screws ( ) and then remove the Fan Block (3).
9. Disconnect the Fan Joint Connectors.
10. Remove 6 screws ( ).
11. Remove 2 screws ( ).
12. Remove 1 screw ( ) and then remove the Fan Blocks (4,
5) and Duct Barrier H.
13. Remove each 4 screws and then remove the Fans (A, B,
C, D, E, F, G, H, I).
14. Reassemble the Fans in reverse order.
Click on the first or last page to see other TH-103PB1E service manuals if exist.