Panasonic CF-19CDBAXVM Simplified Service Manual ▷ View online
9-36
■ Putting of the Sheet
■ Cautions for Setting the Keyboard
LCD Cushion Sheet
LCD Cushion Sheet
KB CNT Hole Cushion
Gasket E
KBD Waterproof Sheet C
Palmrest Waterproof Sheet L
TP Tape
Palmrest Waterproof Sheet R
Click Button Plate
0 0.5mm
0 0.5mm
0 0.5mm
Because the sheets described on this page are waterproof sheets,
the whole parts should be put pressure after attaching.
(Especially, put pressure around the sheets.)
the whole parts should be put pressure after attaching.
(Especially, put pressure around the sheets.)
*Apply the load to attach.
30 to 40N (3.0 to 4.0Kgf)
30 to 40N (3.0 to 4.0Kgf)
Avoid running over.
0.5 to 1mm
Avoid running over.
0.5 to 1mm
Avoid coming over.
0 to 0.5 mm
0 to 0.5 mm
Avoid coming over.
0 to 0.5 mm
0 to 0.5 mm
Attach it using the jig
Attach it using the jig
Attach it using the jig
Fold over the front and attach it.
Avoid running over other sheets.
Fold over the front and attach it.
Avoid coming over.
0 to 0.5 mm
0 to 0.5 mm
Match to the circles.
0 to 0.5mm
0 to 0.5mm
Fit to the wall of the end side, and
put the surplus to the Cabinet side.
put the surplus to the Cabinet side.
Ensure it does not come
over the end of the rib.
over the end of the rib.
Ensure it does not come
over the end of the rib.
over the end of the rib.
The paste should be
put the left side.
put the left side.
0.5 1.5mm
0 0.5mm
0 0.5mm
Keyboard Ass’y
KBD Connector LID Ass’y
Connect the Keyboard FFC
Set using the jig.
Connect part the LCD CABLE/KBD FFC
Use the fixing jig
Avoid running over the Top Case
Incline to the right.
After inserting the FFC,
lock the Connector.
lock the Connector.
Keyboard Plate(L)
Keyboard Plate(R)
KB Connector Lid
Keyboard Connector Lid Sheet
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Keyboard Connector Lid Ass’y
Order of fixing
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Fix from the Hinge side.
Fix from the Hinge side.
Before setting the KBD
Plate (L) and the KBD
Plate (R), press on the
positions (four) with the
two-sided tapes.
30N(3.0Kgf)
Plate (L) and the KBD
Plate (R), press on the
positions (four) with the
two-sided tapes.
30N(3.0Kgf)
Note:
Hold the Connector part when
connecting/disconnecting.
Do not bend at the foot of
stiffening plate.
Do not bend at the foot of
stiffening plate.
Hold the Connector part when
connecting/disconnecting.
Do not bend at the foot of
stiffening plate.
Do not bend at the foot of
stiffening plate.
Connect the Connector
to the dotted part.
to the dotted part.
Connect the LCD CABLE
Connect the KBD FFC
Safety Working
Rotate the LCD to make the
LCD display face front after
setting the KBD.
LCD display face front after
setting the KBD.
Apply the load to attach. 30 to 40N
(3.0 to 4.0 Kgf)
(3.0 to 4.0 Kgf)
KBD FFC insert parts
(Note)
Please exchange the KB Connector Lid Ass'y for the
reserved that stores the KB cables under the keyboard,
when you do the following work. Because KB connector
Lid Sheet takes some time for the restoration when it
peels off once.
- Exchange LCD cable
- Remove/Exchange the Keyboard
Please exchange the KB Connector Lid Ass'y for the
reserved that stores the KB cables under the keyboard,
when you do the following work. Because KB connector
Lid Sheet takes some time for the restoration when it
peels off once.
- Exchange LCD cable
- Remove/Exchange the Keyboard
Moreover, if you would like to reuse the removed sheet,
please leave it on at least 1 day until the elasticity of the
sheet returns.
KB Connector Lid <K34>: DFHM0406ZA
KB Connector Lid Sheet <K39>: DFHR3D91ZA
please leave it on at least 1 day until the elasticity of the
sheet returns.
KB Connector Lid <K34>: DFHM0406ZA
KB Connector Lid Sheet <K39>: DFHR3D91ZA
9-37
n Putting of the Palm Rest ASSY
n Putting of the KBD Tape
Windows Logo Label
Intel Label
Energy Star Label
Palmrest Assy
6 8mm
3 5mm
5 7mm
6 8mm
4 6mm
Remove the Release Paper, and then attach the Palmrest Assy.
Remove the two-sided tape on the back side and attach it.
After attaching, press by the load 30 to 40N (3.0 to 4.0 Kgf).
After attaching, press by the load 30 to 40N (3.0 to 4.0 Kgf).
Remove the Release Paper.
Set the five Hooks.
Ensure the direction is right.
0 to 2 mm from the
notch bottom edge
notch bottom edge
0 to 2 mm from
the protrusion
the protrusion
0 to 2 mm from
the protrusion
the protrusion
KBD Tape
Keyboard
KBD Tape
KBD Tape
0 to 2 mm from
the protrusion
the protrusion
0 to 2 mm from
the protrusion
the protrusion
0 to 2 mm from the
notch bottom edge
notch bottom edge
0 to 2 mm from
the KBD edge
the KBD edge
0 to 2 mm from the
notch bottom edge
notch bottom edge
KBD Tape
9-38
9.2.18.
Setting the Battery Pack and the HDD Pack
1. Set the HDD in the HDD Case and fix it using the 2
Screws. <N13>
2. Open the HDD Cover and set the HDD Pack.
3. Open the Battery Cover and set the Battery.
3. Open the Battery Cover and set the Battery.
Screws <N13> : DXQT2+D4FNL
HDD Case B
HDD Case A
HDD FPC
HDD
Heater
<N13>
<N13>
Hooks
Hooks
1
2
3
Battery Pack
HDD Pack
9-39
n Assembly of the HDD ASSY
Heater Ass’y
Heater Assy
Note for the Heater top end location
Two-sided Tape
Come the bottom over by 0 to 0.5 mm.
Attach on the inside of 1
Details for attachment of Heater Insulation Sheet
Sub material: Pet Tape 1
(19mm width x 4 cm)
(19mm width x 4 cm)
Safety Working
Avoid any stress
Heater
Insulation Parts
Insulation Parts
FPC(HDD)
Thermal Sheet
Heater Insulation Sheet
Revision Label
HDD
0
2mm
2mm
0 0.5mm
0 1mm
10 15mm
5 1mm
5 1mm
1 2mm
Match to the level.
0 to 1 mm
0 to 1 mm
2mm
Matches to
the center
the center
Round to make the brown side
outside and insert the notch part
outside and insert the notch part
Connect the Connector
Back
Attach it on the center of the HDD.
3mm
3mm
Attach on the inner side
of the HDD Case A
of the HDD Case A
Make the Hook inside
Hook it
HDD Case Upper
HDD Damper
HDD Case Lower
HDD Case Lower
HDD Case Tab
HDD Connector Guard
Screw
Screw
FPC Connector
Insulation Sheet
Insulation Sheet
0 0.5mm
Attach
Production
Remove the
Release Paper
Release Paper
Click on the first or last page to see other CF-19CDBAXVM service manuals if exist.