Panasonic CF-19CDBAXVM Simplified Service Manual ▷ View online
9-16
9.2.5.
Assembling the Antenna Cover, the Tablet Latch Cover and the LCD Rear Case
1. Fix the LCD Rear Case using the 10 Screws <N15> and
the 2 Screws. <N16>
2. Attach the Antenna Covers and the Tablet Latch Cover to
the Display Unit.
3. Tighten the 8 Screws <N7> on the back of the Display
Unit.
4. Turn the Display Unit over, and tighten the 8 Screws.
<N7>
Screws <N7> : DRQT26+E5FKL
Screws <N15> : DXYN2+J6FNL
Screws <N16> : DXYN3+J10FNL
Screws <N15> : DXYN2+J6FNL
Screws <N16> : DXYN3+J10FNL
n Assembly of LCD Front Case
<N15>
<N15>
<N15>
<N15>
<N15>
<N16>
<N16>
<N15>
<N15>
<N15>
<N15>
<N15>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
Antenna Cover
Tablet Latch Cover
LCD Rear Case
Antenna Cover
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
Magnet
Magnet Tape
LCD Front Assy
Tape
Magnet Ass’y
0 1mm
0 0.5mm
0 0.5mm
0 0.5mm
0 0.5mm
Insert it between the ribs, and attach it.
1mm (Both on the top and the side)
Avoid running over
Avoid running over
Fit to the rib
Attach here Position of pasting D.
Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).
Avoid running over the display part.
Note for attachment
Do not use if the protrusion such as painting lump exists around D5.
(Due to affect the Touch Screen operations.)
(Due to affect the Touch Screen operations.)
9-17
n Assembly of LCD Rear Case (Applicable Model : Touch Screen Model)
n Assembly of LCD Rear Case (Applicable Model : Digitizer Model)
0 1mm
0 1mm
0 1mm
0 0.5mm
0.5mm
0.5mm
Attach it between marking lines.
0 to 1 mm from one of the lines.
0 to 1 mm from one of the lines.
Marking line
0.5mm
Marking line
Marking line
0.5mm
Marking line
Marking line
(Note)
Arrow without specified measurement: 0 to 0.5 mm
Allowable right/left displacement of the Cushion: max. 0.5 mm
Allowable right/left displacement of the Cushion: max. 0.5 mm
Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).
LCD Rear Cushion F
LCD Rear Cushion F
LCD Rear Cushion F
LCD Rear Cushion G
LCD Rear Cushion G
LCD Rear Cushion A
LCD Rear Cushion A
LCD Rear Cushion B
LCD Rear Cushion B
LCD Rear Cushion C
LCD Rear Cushion C
LCD Rear Cushion D
LCD Rear Cushion E
LCD Rear Cushion E
LCD Rear Assy
0 3mm
0 3mm
0 1mm
0 1mm
0.5mm
0.5mm
0.5mm
0 0.5mm
0.5mm
LCD Rear Ass’y
LCD Rear Cushion F
LCD Rear Cushion F
LCD Rear Cushion F
LCD Rear Cushion A
LCD Rear Cushion A
LCD Rear Cushion A
LCD Rear Cushion C
LCD Rear Cushion C
LCD Rear Cushion C
LCD Rear Cushion C
LCD Rear Cushion D
LCD Rear Cushion E
LCD Rear Cushion E
LCD Rear Cushion C
Marking line
Marking line
Marking line
Marking line Attach it between marking lines.
0 to 1 mm from one of the lines.
Safety Working
Safety critical component
Important Parts
for Safety
for Safety
(Note)
Arrow without specified measurement: 0 to 0.5 mm
Allowable right/left displacement of the Cushion: max. 0.5 mm
Allowable right/left displacement of the Cushion: max. 0.5 mm
Attach and apply the load 30 to 40N (3.0 to 4.0 Kgf).
9-18
n Assembly of Tablet Latch Cover and Antenna Cover
10 Places
16 Places
Do not forget fixing with screws.
Tablet Lacth Cover
Antenna Cover
Antenna Cushion L
Screw
Screw
Screw
Screw
Press and hold it against the cabinet,
and fix it using the Screw.
and fix it using the Screw.
Press and hold it against the cabinet,
and fix it using the Screw.
and fix it using the Screw.
Press and hold it against the cabinet,
and fix it using the Screw.
and fix it using the Screw.
Screw Locations
Attach it matching to the silk to put the
two-sided tape on the Antenna side.
two-sided tape on the Antenna side.
Fix in the order.
the front side as well,
8 screws each side
the front side as well,
8 screws each side
Antenna Cover
9-19
9.2.6.
Setting the Display Unit
1. Fix the Display Unit using the 2 Screws <N9>.
2. Close the Display Unit and turn the computer over, then
2. Close the Display Unit and turn the computer over, then
fix the Display Unit using the 4 Screws <N18>.
3. Turn the computer over and fix the LCD Hinge Cover
using the 2 Screws <N1>.
4. Open the Display Unit and fix the LCD Hinge Cover using
the 2 Screws <N1>.
Screws <N1> : DFHE5025XA
Screws <N9> : DRSB2+5FKL
Screws <N18> : XYN4+J7FNL
Screws <N9> : DRSB2+5FKL
Screws <N18> : XYN4+J7FNL
<N18>
<N18>
<N18>
<N18>
<N9>
<N9>
Hinge Cover
<N1>
<N1>
LCD Hinge Cover
<N1>
<N1>
Click on the first or last page to see other CF-19CDBAXVM service manuals if exist.