Panasonic KX-TDE100UA (serv.man2) Service Manual ▷ View online
29
KX-TDE100UA
7 Operation Instructions
7.1.
Type and Maximum Number of Slots
The PBX supports the following type and number of slots.
IPCMPR Card Slot and Free Slot
Virtual Slots of the IPCMPR Card
Slot Type
KX-TDE100
IPCMPR Card Slot
1
Free Slot
6
Virtual Slot
Virtual Trunk Slot
4
Virtual Extension Slot
4
30
KX-TDE100UA
7.2.
Maximum Optional Service Cards
The following number of cards can be installed in the Free Slots or Virtual Slots of the PBX.
Note:
• Any card that exceeds the capacity of the PBX will be ignored.
• When the PBX starts up with an invalid configuration, some cards will be ignored.
• When the PBX starts up with an invalid configuration, some cards will be ignored.
Cards Installed in Free Slots or Virtual Slots
*1 When installing T1, E1, PRI30, PRI23 cards, make sure that the number of these cards
X
2 + the number of the other cards
(including IP-GW4E cards) does not exceed 8.
Cards Mounted on Other Optional Service Cards
*1 Only 1 ECHO16 card can be mounted on each OPB3 card.
Card Type
KX-TDE100
IPCMPR
1
Trunk Card
8
Virtual Trunk Card
4
V-IPGW16
2
Physical Trunk Card
Total 6 *1
LCOT4
LCOT8
LCOT16
DID8
LCOT8
LCOT16
DID8
6
E&M8
BRI4
BRI8
T1
E1
BRI4
BRI8
T1
E1
4
PRI23
PRI30
IP-GW4E
PRI30
IP-GW4E
4
IP-GW16
Extension Card
8
Virtual Extension Card
4
V-IPEXT32
2
V-SIPEXT32
4
Physical Extension Card
Total 6
DHLC8
DLC8
DLC16
SLC8
DLC8
DLC16
SLC8
6
SLC16
MSLC16
IP-EXT16
CSIF4
MSLC16
IP-EXT16
CSIF4
4
CSIF8
OPB3
4
Total
14
Card Type
KX-TDE100
Mounted on
DSP16
1
DSP64
IPCMPR Card
RMT
1
CID/PAY8
12
LCOT8 Card/LCOT16 Card
CID8
EXT-CID
EXT-CID
6
SLC8 Card
DPH4
4
DPH2
8
ECHO16
2 *1
OPB3 Card
MSG4
4
EIO4
4
31
KX-TDE100UA
7.3.
Maximum Trunk and Extension
The PBX supports the following number of trunks and extensions.
7.4.
Maximum Terminal Equipment
The following shows the number of each terminal equipment type supported by the PBX.
*1 KX-NT136 and KX-NT265
*2 KX-NT300 series and KX-NT265 (software version 2.00 or later only)
*2 KX-NT300 series and KX-NT265 (software version 2.00 or later only)
Note for KX-NT265 IP-PT users
The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version, follow the proce-
dure below:
dure below:
Type
KX-TDE100
Total Number of Trunk
128
Trunk (Physical Trunk Card)
120
Trunk (Virtual Trunk Card)
32
Total Number of Extension
256
Extension (Physical Extension Card)
160
Extension (Virtual Extension Card)
128
IP-PT and IP Softphone
64
SIP Extension
128
Terminal Equipment Type
KX-TDE100
Telephone
256
SLT
96
KX-T7600 series DPT
128
KX-T7560/KX-T7565 DPT
96
Other DPT
32
APT
24
IP-PT
160
IP-PT *1 (supported by IP-EXT16 card)
96
IP-PT *2 (supported by IPCMPR card)
64
SIP Extension
128
DSS console
8
CS
32
PS
128
Voice Processing System (VPS)
2
Doorphone
16
Door Opener
16
External Sensor
16
External Relay
16
32
KX-TDE100UA
7.5.
Power Supply Unit Selection
The PBX needs a power supply unit (PSU) suitable for its configuration. Calculate the load figure from the type and number of
items of equipment to be connected, and determine the type of PSU that will be required.
items of equipment to be connected, and determine the type of PSU that will be required.
Load Figure Calculation
*1 Only the extension cards that can support SLTs count for the load figures.
PSU Capacity
Each PSU supports a different load figure.
Equipment Type
Load Figure
PT
KX-T7600 series DPT/KX-T7600 series DSS console
1
KX-T7560/KX-T7565 DPT
1
Other DPT/Other DSS console
4
APT
4
IP-PT
0
SIP Extension
0
Extension Card *1
DHLC8
8
SLC8
8
SLC16
16
MSLC16
16
CS (1 unit)
4
PT-interface CS (1 unit)
4
ISDN Extension
2
VPS (1 port)
1
PSU Type
Maximum Load Figure
PSU-S
64
PSU-M
128
Click on the first or last page to see other KX-TDE100UA (serv.man2) service manuals if exist.