Panasonic KX-NS0154CE (serv.man2) Service Manual ▷ View online
17
KX-NS0154CE
9.3.
System Check
Note:
Refer to waveform (15) - (18) in Waveform (P.33 and P.34) .
18
KX-NS0154CE
10 Disassembly and Assembly Instructions
10.1. Disassembly Instructions
1. Remove the 4 screws (A), and remove the Bottom Cabinet.
2. Remove the Solder on Cable of the Main Board by the Soldering iron.
3. Remove the Main Board from the Top Cabinet.
No need fix here.
Because wire does not reach.
Main Board
Front Cabinet
19
KX-NS0154CE
11 Measurements and Adjustments
11.1. USB Test Mode
The various tests are avialbale by using USB communication with your PC.
Following tests are described in this service manual.
Following tests are described in this service manual.
• Clock Adjustment (P.22)
Note:
Make sure that you have installed USB driver on your Windows PC before starting test mode.
Supported Operating Systems
This application software operation has been confirmed under the following Operating Systems
- Windows XP
- Windows Vista
- Windows 7
- Windows XP
- Windows Vista
- Windows 7
Note:
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Windows
2000, Windows XP, Windows Server 2003, Windows Vista, Windows 7 are trademarks and trade names of Microsoft
Corporation in the United States and/or other countries.
2000, Windows XP, Windows Server 2003, Windows Vista, Windows 7 are trademarks and trade names of Microsoft
Corporation in the United States and/or other countries.
11.1.1.
How to Install the Application for Test Mode
PC is required to measure the characteristics and check the function. USB driver needs to be installed on it.
11.1.1.1. USB Driver Installation
Preparation:
• USB-miniB cable.
• copy the USB driver "linux-cdc-acm.inf" to your PC.
• Refer to the following URL for a USB driver.
• copy the USB driver "linux-cdc-acm.inf" to your PC.
• Refer to the following URL for a USB driver.
https://www.kernel.org/doc/Documentation/usb/linux-cdc-acm.inf
11.1.1.2. USB Driver installation
• Connect USB-miniB cable to your PC.
• Open device manager, and select USB device of USB cable.
• Select "linux-cdc-acm.inf" as USB driver.
• Open device manager, and select USB device of USB cable.
• Select "linux-cdc-acm.inf" as USB driver.
20
KX-NS0154CE
11.1.1.3. PC Setting
Preparation:
• PC
• Base Unit / Handset
• Base Unit / Handset
1. Install the TeraTerm
Install the "teraterm-x.xx.exe" (x.xx = version) to your PC from internet site. Refer to the "readme" of the TeraTerm for installation
process etc.
process etc.
2. Setting the TeraTerm
Before setting the TeraTarm:
USB ports 3 to 16 are available but Teraterm (version 2.3) sets to use only the USB ports 3 and 4 by default.
In case that the port number now you investigated is 5 or more.
In case that the port number now you investigated is 5 or more.
- Open "TERATERM.INI" in installed folder.
Ex) c:\Program Files\teraterm
- Search the word "MaxComPort".
- Change the number to your port number.
- Change the number to your port number.
Ex) If your port number is 6, then Change to "MaxComPort=6".
- Then save and quit.
2-1. Teraterm will be activated automatically if connect a PC and the base unit by a USB cable. Please restart Teraterm after
USB cable is reconnected.
2-2. Select "Serial port" from "Setup" menu.
• Change the settings of "Serial port setup" as follows. Then click OK.
(1)
Select "Serial port" from "Setup" menu.
(2)
Select your port number.
(Refer to "
3-1.Confirm the
USB port number")
(3) Set these items like this.
(4) Click "OK".
Click on the first or last page to see other KX-NS0154CE (serv.man2) service manuals if exist.