Panasonic UB-5365 / UB-5865 (serv.man2) Service Manual ▷ View online
89
9 Service Mode
9.1.
Operation
The following shows how to enter the Service Mode and the settings.
1. Press the "Power Key" while pressing the "Menu Key", "2-Screen Copy Key", and "Multi-Copy/Stop Key".
2. Confirm that the display on the "Display Window" is "H1". (The Service Mode is entered by this operation.)
3. Press the "Menu Key" or the "2-Screen Copy Key" until the menu to be set is displayed on the "Display Window".
4. Press the "Multi-Copy/Stop Key". (This specifies the setting menu.)
5. Set the parameter by pressing the "Menu Key" or the "2-Screen Copy Key".
6. Press the "Multi-Copy/Stop Key".
7. Pressing the "Contrast Key" enters the ready mode (the normal operation of the Panaboard).
2. Confirm that the display on the "Display Window" is "H1". (The Service Mode is entered by this operation.)
3. Press the "Menu Key" or the "2-Screen Copy Key" until the menu to be set is displayed on the "Display Window".
4. Press the "Multi-Copy/Stop Key". (This specifies the setting menu.)
5. Set the parameter by pressing the "Menu Key" or the "2-Screen Copy Key".
6. Press the "Multi-Copy/Stop Key".
7. Pressing the "Contrast Key" enters the ready mode (the normal operation of the Panaboard).
90
9.2.
Contents
No.
Item
Display
Window
Mode type
Parameter
Default value
Remarks
1
Screen size
Setting
2 or 3
2: UB-5365
3: UB-5865
3: UB-5865
2
Destination code
Setting
0-9
0
0: Japan
3
Output size
Setting
0 or 1
(0: Letter)
1: A4
(0: Letter)
1: A4
1
4
Date and time display language
Setting
0 or 1
0: Japanese
1: ASCII
0: Japanese
1: ASCII
0
5
Date and time display method
Setting
0-2
0: Year/Month/Day
1: Month/Day/Year
2: Day/Month/Year
0: Year/Month/Day
1: Month/Day/Year
2: Day/Month/Year
0
6
Time display method
Setting
0 or 1
0: 24 hours
1: 12 hours
0: 24 hours
1: 12 hours
0
7
Standard threshold value adjustment
Adjustment 0-7
0
See section
10 for
adjustment
method.
10 for
adjustment
method.
8
Dark threshold value adjustment
Adjustment 0-7
1
See section
10 for
adjustment
method.
10 for
adjustment
method.
9
PC mode (disabled/enabled)
Setting
0 or 1
0: Can be con-
nected
1: Cannot be con-
nected
0: Can be con-
nected
1: Cannot be con-
nected
0
10 USB memory mode (disabled/enabled)
Setting
0 or 1
0: Can be con-
nected
1: Cannot be con-
nected
0: Can be con-
nected
1: Cannot be con-
nected
0
11
CIS (Image Sensor) adjust-
ment
ment
(1) Adjustment Pattern Output
Diagnosis
—
—
(2) Adjusting the Vertical Scanning
Position (between CIS0 and
CIS1)
CIS1)
Adjustment
(3) Adjusting the Vertical Scanning
Position (between CIS1 and
CIS2)
CIS2)
Adjustment
(4) Adjusting the Vertical Scanning
Position (between CIS2 and
CIS3)
CIS3)
Adjustment
(5) Adjusting the Horizontal Scan-
ning Position (between CIS0
and CIS1)
and CIS1)
Adjustment
(6) Adjusting the Horizontal Scan-
ning Position (between CIS1
and CIS2)
and CIS2)
Adjustment
(7) Adjusting the Horizontal Scan-
ning Position (between CIS2
and CIS3)
and CIS3)
Adjustment
91
Note 1:
*1: For detailed operation, refer to sec. 10, Adjustment.
*2: By performing this operation, the shading waveform immediately after copy can be printed.
*3: The data format is csv.
*4: By performing this operation, the backup shading data can be cleared.
*2: By performing this operation, the shading waveform immediately after copy can be printed.
*3: The data format is csv.
*4: By performing this operation, the backup shading data can be cleared.
After turning on the power, the new shading data is stored as the backup data.
Don’t perform this operation with an abnormal shading waveform (faulty Image Sensor).
Don’t perform this operation with an abnormal shading waveform (faulty Image Sensor).
*5: Before implementing this item, insert the USB Memory with firmware data saved in the USB Connector (for USB
Flash Memory) of the Panaboard printer.
12
Sensor test
(1) End Sensor (for Thermal Trans-
fer Film): The LED (7 segment)
lights on and off by manually rotat-
ing the gear for the film.
fer Film): The LED (7 segment)
lights on and off by manually rotat-
ing the gear for the film.
Diagnosis
—
—
(2) Top Sensor (for paper feed):
The LED (7 segment) lights when
detecting the paper.
The LED (7 segment) lights when
detecting the paper.
Diagnosis
—
—
(3) Door Sensor: The LED (7 seg-
ment) lights when the printer door
is closed.
ment) lights when the printer door
is closed.
Diagnosis
—
—
(4) Paper Sensor: The LED (7 seg-
ment) lights when the copy paper is
not set on the Paper Cover.
ment) lights when the copy paper is
not set on the Paper Cover.
Diagnosis
—
—
(5) Home Sensor (for Screen
(Film)): The LED (7 segment) lights
when the screen (film) is at the
home position.
(Film)): The LED (7 segment) lights
when the screen (film) is at the
home position.
Diagnosis
—
—
13 Printing test
*2,*6
Diagnosis
—
—
14 Storing shading data in the USB memory
*3, *5
Diagnosis
—
—
15 Initializing shading data
*4
Setting
—
—
16 Updating firmware
*5
Setting
—
—
No.
Item
Display
Window
Mode type
Parameter
Default value
Remarks
92
Note 2: *6 Printing test sample
Click on the first or last page to see other UB-5365 / UB-5865 (serv.man2) service manuals if exist.