Panasonic KV-SL3066 / KV-SL3056 / KV-SL3055 / KV-SL3036 / KV-SL3035 (serv.man2) Service Manual ▷ View online
77
3. Carriage home sensor does
not work properly.
1. Perform the "Carriage Motor" test in Sec.
10.3.7.
to check the sensor detection.
2. Check connection the harness CONTROL Board to
FLATBED RELAY Board and FLATBED RELAY
Board to CARRIAGE HOME SENSOR Board.
Board to CARRIAGE HOME SENSOR Board.
3. Check the soldering condition of the CARRIAGE
HOME SENSOR Board.
4. Check the soldering condition of the R679, R546,
R551 and CN11.
5. Check the soldering condition of CN1000, CN1003.
6. Replace faulty parts.
6. Replace faulty parts.
F60: Front-side
gain adjustment
error
gain adjustment
error
50
00
00
00 1. The surface of Scanning
Glass (F) is dirty.
1. Clean the surface with a soft and dry cloth.
2. CIS (F) Unit does not work
properly.
*KV-SL3056/55/36/35: CN2
1. Execute Focus test in Sec.
10.3.7.
to check the
waveform of CIS output.
2. Execute "CIS LED" test in Sec.
10.3.7.
to check the
lighting of each RGB.
3. Check the following connections and soldering
condition on each connector.
a. CIS (F) Unit to CN1*(CONTROL Board)
a. CIS (F) Unit to CN1*(CONTROL Board)
4. Check the power supply for LED.
(1) CN1*-4th pin, F1: 7.0 V
(2) L3, L6, L7, Q7, Q8, Q9
(2) L3, L6, L7, Q7, Q8, Q9
5. Replace faulty parts or boards.
3. Background Plate switching
is not working properly.
1. Execute Focus test in Sec.
10.3.7.
to check the
peak level when Background Color is White and
Black.
Black.
4. Problem with Pixel data from
CIS (F) or from image
processing circuit.
processing circuit.
*KV-SL3056/55/36/35: CN2
**KV-SL3056/55/36/35: IC2
**KV-SL3056/55/36/35: IC2
1. Check the connection and soldering condition of
the following parts.
(1) Between CIS (F) and CN1 (CONTROL Board)
(1) Between CIS (F) and CN1 (CONTROL Board)
2. Check the soldering condition of the following parts
and of their surrounding circuits on the CONTROL
Board.
(1) IC9 (FP4)
(2) IC1** (AFE)
(3) IC4 (D/A Conv.)
Board.
(1) IC9 (FP4)
(2) IC1** (AFE)
(3) IC4 (D/A Conv.)
3. Monitor the following CIS Timing signals on the
CN1*.
(1) FCLK (CN1*-5th pin) : See
(1) FCLK (CN1*-5th pin) : See
Fig.11.2.1.
(2) FSP (CN1*-7th pin) : See
Fig.11.2.2.
4. Replace faulty parts or boards.
F61: Front-side
black level error
black level error
51
00
00
00 1. Problem with Pixel data from
CIS (F) or from image
processing circuit.
processing circuit.
Refer to F60 - 3.
F62: Back-side
gain adjustment
error
gain adjustment
error
52
00
00
00 1. The surface of Scanning
Glass (B) is dirty.
1. Clean the surface with a soft and dry cloth.
2. CIS (B) Unit does not work
properly.
*KV-SL3056/55/36/35: CN4
1. Execute Focus test in Sec.
10.3.7.
to check the
waveform of CIS output.
2. Execute "CIS LED" test in Sec.
10.3.7.
to check the
lighting of each RGB.
3. Check the following connections and soldering
condition on each connector.
a. CIS (B) Unit to CN3*(CONTROL Board)
a. CIS (B) Unit to CN3*(CONTROL Board)
4. Check the power supply for LED.
(1) CN3*-4th pin, F1: 7.0 V
(2) L8, L9, L10, Q9, Q10, Q12
(2) L8, L9, L10, Q9, Q10, Q12
5. Replace faulty parts or boards.
3. Background Plate switching
is not working properly.
1. Execute Focus test in Sec.
10.3.7.
to check the
peak level when Background Color is White and
Black.
Black.
Error Code
ST1
ST2
ST3
ST4
Possible Cause
Recommended action
78
4. Problem with Pixel data from
CIS (B) or from image
processing circuit.
processing circuit.
*KV-SL3056/55/36/35: CN4
1. Check the connection and soldering condition of
the following parts.
(1) Between CIS (B) and CN3* (CONTROL Board)
(1) Between CIS (B) and CN3* (CONTROL Board)
2. Check the soldering condition of the following parts
and of their surrounding circuits on the CONTROL
Board.
(1) IC9 (PF4)
(2) IC2 (AFE)
(3) IC4 (D/A Conv.)
Board.
(1) IC9 (PF4)
(2) IC2 (AFE)
(3) IC4 (D/A Conv.)
3. Monitor the following CIS Timing signals on the
CN3*.
(1) BCLK (CN3*-5th pin) : See
(1) BCLK (CN3*-5th pin) : See
Fig.11.2.1.
(2) BSP (CN3*-7th pin) : See
Fig.11.2.2.
4. Replace faulty parts or boards.
F63: Back-side
black level error
black level error
53
00
00
00 1. Problem with Pixel data from
CIS (B) or from image
processing circuit.
processing circuit.
Refer to F62-3.
F64: Flatbed
gain adjustment
error
gain adjustment
error
56
00
00
00 1. The surface of Flatbed Glass
is dirty.
1. Clean the surface with a soft and dry cloth.
2. CIS (FB) Unit does not work
properly.
1. Check the position of CIS (FB) after power-on and
the error.
2. Execute "CIS LED" test in Sec.
10.3.7.
to check the
lighting of each RGB.
3. Check the following connections and soldering
condition on each connector.
(1) CN5 (CONTROL Board) to CN1001 (FLATBED
(1) CN5 (CONTROL Board) to CN1001 (FLATBED
RELAY Board)
(2) CN1004 (FLATBED RELAY Board) to CIS (FB)
4. Check the power supply for LED.
(1) CN5-6th pin, F1: 7.0 V
(2) L16, L17, L18, Q15, Q16, Q18
(2) L16, L17, L18, Q15, Q16, Q18
5. Replace faulty parts or boards.
3. Problem with Pixel data from
CIS (FB) or from image
processing circuit.
processing circuit.
1. Check the connection and soldering condition of
the following parts.
(1) Between CN5 (CONTROL Board) to CN1001
(1) Between CN5 (CONTROL Board) to CN1001
(FLATBED RELAY Board)
(2) CN1004 (FLATBED RELAY Board) to CIS (FB)
2. Check the soldering condition of the following parts
and of their surrounding circuits on the CONTROL
Board and FLATBED RELAY Board.
(1) IC9 (PF4)
(2) IC3 (AFE)
(3) IC5 (D/A Conv.)
(4) R1000, R1001, R1002, L1000, L1001 (on FB
Board and FLATBED RELAY Board.
(1) IC9 (PF4)
(2) IC3 (AFE)
(3) IC5 (D/A Conv.)
(4) R1000, R1001, R1002, L1000, L1001 (on FB
Board)
3. Monitor the following CIS Timing signals on the
CN5.
(1) CCLK_FB (CN1004-9th pin) : See
(1) CCLK_FB (CN1004-9th pin) : See
Fig.11.2.3.
(2) BP_FB (CN1004-11th pin) : See
Fig.11.2.3.
4. Replace faulty parts or boards.
F65: Flatbed
black level error
black level error
57
00
00
00 1. Problem with Pixel data from
CIS (FB) or from image
processing circuit.
processing circuit.
Refer to F64 - 3.
F80: Double
Feed Detector
error
Feed Detector
error
60
00
00
00 1. Double Feed Detector
(Generate) does not work
properly.
properly.
Refer to U23 - 5.
2. Double Feed Detector
(Receive) does not work
properly.
properly.
Refer to U23 - 6.
F82: DAC
control status
error
control status
error
63
00
00
00 1. No reply from DAC IC.
1. Check the soldering condition of CONTROL Board
and its surrounding parts of IC4 and IC5.
2. Replace faulty parts or boards.
F90: Sub-
processor error
processor error
9E
XX
00
XX 1. Sub-processor error of
ASIC.
1. Check the soldering condition of CONTROL Board
and its surrounding parts of IC9.
2. Replace faulty parts or boards.
Error Code
ST1
ST2
ST3
ST4
Possible Cause
Recommended action
79
Fig.11.2.1.
Fig.11.2.2.
Fig.11.2.3.
CN2-5 Pixel Clock
KV-SL3056/SL3055/SL3036/SL3035
KV-SL3056/SL3055/SL3036/SL3035
CN1-5 Pixel Clock
KV-SL3066
KV-SL3066
CN2-7 SP(Start Pulse)
KV-SL3056/SL3055/SL3036/SL3035
KV-SL3056/SL3055/SL3036/SL3035
CN1-7 SP(Start Pulse)
KV-SL3066
KV-SL3066
CN1004-11 SP_FB
CN1004-9 CCLK_FB
80
Fig.11.2.4.
Fig.11.2.5.
Fig.11.2.6.
CN12-1 Motor OUT
Note : Frequency depends on each model
Note : Frequency depends on each model
CN15-2 US OUT
CN14-1 R491 US -AMP_OUT
Click on the first or last page to see other KV-SL3066 / KV-SL3056 / KV-SL3055 / KV-SL3036 / KV-SL3035 (serv.man2) service manuals if exist.