Panasonic KV-S3065CL / KV-S3065CW (serv.man4) Service Manual ▷ View online
1.4. About Lead Free Solder (PbF: Pb free)
Note
· In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or
solder that contains lead.
· We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin
(Sn), Silver (Ag), and Copper (Cu).
· This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service
and repair work we suggest using the same type of solder although, with some precautions, standard Pb solder can
also be used.
also be used.
Distinction of PbF PCB
· PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Caution
· PbF solder has a melting point that is 50 ° - 70 °F, (30 ° - 40 °C) higher than Pb solder.
Please use a soldering iron with temperature control and adjust it to 700 ° ± 20 °F (370 ° ± 10 °C). In case of using
high temperature soldering iron, please be careful not to heat too long.
high temperature soldering iron, please be careful not to heat too long.
· PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100 °F, (600 °C).
· If you must use Pb solder on a PCB manufactured using PbF solder, remove as much of the original PbF solder as
· If you must use Pb solder on a PCB manufactured using PbF solder, remove as much of the original PbF solder as
possible and be sure that any remaining is melted prior to applying the Pb solder.
· When applying PbF solder to double layered boards, please check the component side for excess which may flow
onto the opposite side (See figure, below)
1.4.1. Suggested Pb free solder
We recommend you to use the following solder when you re-solder components for repair. Before using other Pb free solder than
the following solder, be sure to confirm a solder maker you appoint has made license agreements to be required when using Pb
free solder legally.
the following solder, be sure to confirm a solder maker you appoint has made license agreements to be required when using Pb
free solder legally.
Supplier: Senju Metal Industry Co., Ltd. (http://www.senju-m.co.jp)
Part Description in Senju: EcoSolder RMA02 P3 M705 Series
5
KV-S3065CLSERIES / KV-S3065CWSERIES
2 SPECIFICATIONS
Item
Model No.
KV-S3065CL Series
*1
KV-S3065CW Series
*2
Scanner
Scanning face
Duplex
Scanning method
CIS (Contact-type color Image Sensor): Front & Back sides
Scanning Width
227 mm (9.0 in.)
302 mm (11.9 in.)
Readout speed
Black & White: 60 ppm/110 ipm (A4, 200 dpi, Portrait) 65 ppm/120 ipm (Letter, 200 dpi,
Portrait)
Color: 60 ppm/110 ipm (A4, 200 dpi, Portrait) 65 ppm/120 ipm (Letter, 200 dpi, Portrait)
Portrait)
Color: 60 ppm/110 ipm (A4, 200 dpi, Portrait) 65 ppm/120 ipm (Letter, 200 dpi, Portrait)
Resolution
Main scanning direction: 100~600 dpi (1 dpi step)
Sub-scanning direction: 100~600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Sub-scanning direction: 100~600 dpi (1 dpi step)
Optical resolution is 600 dpi.
Image output
Binary, Grayscale, Color,
*5
Multi-stream
TM
(Binary and Color, Binary and Grayscale)
Tonal gradation
Dither (64 step gradation), Error diffusion (64 step gradation), Grayscale (8 bit), Color (24 bit)
Image control
Image emphasis, Dynamic threshold, Automatic separation, Multi-Color dropout, Mirror image,
Noise reduction
Noise reduction
Other functions
Patch code detection (Kodak patch 2,3,T, Control sheet), Double feed detection
Paper
Size
48×70 mm (1.9×2.8 in.) to
297×431 mm (11.7×17 in.)
297×431 mm (11.7×17 in.)
48×70 mm (1.9×2.8 in.) to
297×431 mm (11.7×17 in.)
297×431 mm (11.7×17 in.)
Thickness
0.05 to 0.2 mm (2.0 to 7.9 mils)
Note: 1 mil = 1/1000 in.
Weight
40 to 157 g/m
2
(10.7 to 41.9 lb.)
Note: 1 lb. = 3.75 g/m
2
Detection
Empty, Size, Jam, and Double-feed detection
Interface
SCSI
(20 MB/s, 50 pins half type) or USB 2.0 (Connector type: B)
Hopper capacity
Letter/A4 or less (Portrait): 300 sheets [64 g/m
2
(17.1 lb.)]
Wider than Letter/A4 (Portrait): 200 sheets [64 g/m
2
(17.1 lb.)]
Unit
External dimensions
(Width × Depth × Height)
(Width × Depth × Height)
495×575×288 mm (19.5×22.7×11.4 in.)
Note: When the ADF Door is open, height is 505 mm (19.9 in.).
Weight
24 kg (53 lbs.)
Power requirement
AC100-120 V, 50/60 Hz
*3
AC220-240 V, 50/60 Hz
*4
Power
consumption
consumption
Maximum
(Scanning)
(Scanning)
1.4 A
*3
0.6 A
*4
Minimum
(Standby)
(Standby)
0.6 A
*3
0.3 A
*4
Sleep mode
8 W
*3
8 W
*4
Environment
Operating temperature and
Humidity
Humidity
Temperature: 15 °C to 30 °C (59 °F to 86 °F)
Humidity: 30 % to 80 % RH
Humidity: 30 % to 80 % RH
Storage temperature and
Humidity
Humidity
Temperature: 0 °C to 35 °C (32 °F to 95 °F)
Humidity: 10 % to 80 % RH
Humidity: 10 % to 80 % RH
Accessories
Installation manual, Maintenance manual, AC cord, USB cable, Blower, Cleaning paper,
Shading paper, CD [ISIS Driver, TWAIN Driver, Capture software (RTIV), Operation manual,
P.I.E. manual, RTIV manual, Control sheet images, User Utility, User Utility Manual]
Shading paper, CD [ISIS Driver, TWAIN Driver, Capture software (RTIV), Operation manual,
P.I.E. manual, RTIV manual, Control sheet images, User Utility, User Utility Manual]
PbF (Pb Free)
Applied to PCB assemblies CONTROL, INTERFACE, PANEL, DRIVE, POWER, SIZE
DETECTOR, HOPPER HOME, RELAY (LOWER), SKEW (R), WAITING SENSOR,
STARTING SENSOR, ENDING (FRONT) SENSOR, RELAY (UPPER), PAPER JAM
SENSOR, ENDING (REAR) SENSOR, POINTER, POST IMPRINTER DOOR, POWER
RELAY, CIS (F) RELAY, CIS (B) RELAY Boards for KV-S3065CL Series and KV-S3065CW
Series
DETECTOR, HOPPER HOME, RELAY (LOWER), SKEW (R), WAITING SENSOR,
STARTING SENSOR, ENDING (FRONT) SENSOR, RELAY (UPPER), PAPER JAM
SENSOR, ENDING (REAR) SENSOR, POINTER, POST IMPRINTER DOOR, POWER
RELAY, CIS (F) RELAY, CIS (B) RELAY Boards for KV-S3065CL Series and KV-S3065CW
Series
Note: Distinction of PbF PCB
PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.
Option
Roller Exchange Kit (standard): KV-SS017
Roller Exchange Kit (for thin paper): KV-SS018
Roller Cleaning Paper (KV-SS03)
Imprinter (KV-SS014)
Ink Cartridge (KV-SS021)
Roller Exchange Kit (for thin paper): KV-SS018
Roller Cleaning Paper (KV-SS03)
Imprinter (KV-SS014)
Ink Cartridge (KV-SS021)
6
KV-S3065CLSERIES / KV-S3065CWSERIES
Note:
*1
: KV-S3065CL Series
KV-S3065CL: For U.S.A.
KV-S3065CL-U: For Europe
KV-S3065CL-A: For Australia
KV-S3065CL-T: For Taiwan
SERIAL No. shown on the name plate on each scanner will distinguish the destinations for each area as follows.
1. SERIAL No. for U.S.A.
→ 802 xxxx xxxx
2. SERIAL No. for Europe
→ 803 xxxx xxxx
3. SERIAL No. for Australia
→ 804 xxxx xxxx
4. SERIAL No. for Taiwan
→ 805 xxxx xxxx
(x: Don’t care)
KV-S3065CLCN: For China
SERIAL No. for China
→ 806 xxxx xxxx
(x: Don’t care)
*2
: KV-S3065CW Series
KV-S3065CW: For U.S.A.
KV-S3065CW-U: For Europe
KV-S3065CW-A: For Australia
KV-S3065CW-T: For Taiwan
SERIAL No. shown on the name plate on each scanner will distinguish the destinations for each area as follows.
1. SERIAL No. for U.S.A.
→ 747 xxxx xxxx
2. SERIAL No. for Europe
→ 797 xxxx xxxx
3. SERIAL No. for Australia
→ 798 xxxx xxxx
4. SERIAL No. for Taiwan
→ 799 xxxx xxxx
(x: Don’t care)
KV-S3065CWCN: For China
SERIAL No. for China
→ 800 xxxx xxxx
(x: Don’t care)
*3
: Applied to KV-S3065CL/S3065CW (For U.S.A. and other countries where power supply (AC100 to AC120 V) is applied
except for Taiwan) and KV-S3065CL-T/S3065CW-T
*4
: Applied to KV-S3065CL-U/S3065CW-U (For Europe and other countries where power supply (AC220 to AC240 V) is
applied except for Australia and China), KV-S3065CL-A/S3065CW-A, and KV-S3065CLCN/S3065CWCN
*5
: MultiStream is TM of Pixel Translations (a division of Action point Inc.)
7
KV-S3065CLSERIES / KV-S3065CWSERIES
3 COMPONENT IDENTIFICATION
Note:
*1
: Indicator Status: Refer to Fig.3.1.
*2
: Only used for self-test (Service Mode): Refer to 9.4.
Fig.3.1 Power Indicator for showing scanner status
Color
ON
Flashing
Green
1. Ready
2. Scanning
2. Scanning
Sleeping
Orange
*1. Ready with warning
*2. Scanning with warning
*2. Scanning with warning
1. Initializing
*2. Sleeping with warning
3. Shading
*2. Sleeping with warning
3. Shading
Red
An error
System error
Note:
* Warning: Clean roller or replace roller
8
KV-S3065CLSERIES / KV-S3065CWSERIES
Click on the first or last page to see other KV-S3065CL / KV-S3065CW (serv.man4) service manuals if exist.