Panasonic SDR-S70P / SDR-S70PC / SDR-S70EG / SDR-S70EF / SDR-S70EC / SDR-S70EP / SDR-S70EB / SDR-S70EE / SDR-S71P / SDR-S71GC / SDR-S71GA / SDR-S71GN / SDR-S71GK / SDR-S71PU / SDR-S71PR / SDR-T70EE Service Manual ▷ View online
33
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
• How to use the software.
Please reference help of the TATSUJIN software.
Set-up manual for SD Video Camera
1. Installation of USB-SERIAL Driver
Execute the "Setup.exe" file in "Com Mass" folder by double clicking to install the USB-SERIAL driver.
2. Set-Up
a. Remove the SD card from this unit.
b. While keep pressing the "iA" button and "DEL" button, hold left the "zoom lever" towards to "W" position for more than 3
b. While keep pressing the "iA" button and "DEL" button, hold left the "zoom lever" towards to "W" position for more than 3
seconds until the "COM" is displayed on LCD.
3. Release of COM mode (It is necessary for normal mode.)
Retry above 2-b, then "COM" is disappeared.
34
10 Maintenance
10.1. Cleaning Lens and LCD Panel
Do not touch the surface of the lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
A lens cleaning paper and lens cleaner are available at local camera shops and market place.
35
11 Factory Setting
Note:
The screens of the factory setting are for SDR-T71PU.
For other models, refer to each screen of the factory setting.
For other models, refer to each screen of the factory setting.
11.1. How to turn on the factory setting?
1. Indication method of the service menu
Set the mode switch "
Recording" mode.
2. While keep pressing the "Intelligent auto/Manual" button and "Menu" button, hold left the Zoom Lever towards to "[ W ]" posi-
tion for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Under the condition of the Item No."1" is yellow high lighted, press the "[RIGHT
] of joystick" button.
4. By pressing the "[UP
] of joystick" button, then press the "[center] of joystick" button.
5. After few seconds "END" is displayed on LCD monitor.Cutting of battery connection or AC power supply connection as a com-
pletion of the "FACTORY SETTINGS".
36
11.2. What is the factory settings?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Clear the date.
7. Initialize the VIERA Link Physical Address.
5. Clear the service mode information contents.
6. Clear the date.
7. Initialize the VIERA Link Physical Address.
The setting position of factory settings:
Name
Setting position
Mode switch
Open/close switch
Click on the first or last page to see other SDR-S70P / SDR-S70PC / SDR-S70EG / SDR-S70EF / SDR-S70EC / SDR-S70EP / SDR-S70EB / SDR-S70EE / SDR-S71P / SDR-S71GC / SDR-S71GA / SDR-S71GN / SDR-S71GK / SDR-S71PU / SDR-S71PR / SDR-T70EE service manuals if exist.