Panasonic SD-2511WTS Service Manual ▷ View online
37
6.7.
Pulley B, connector lower unit and others
1. Remove six screws and remove heater case unit from the
main body.
2. Next Bottom side.
3. Remove the belt with sliding it out while rotating pulley B.
4. Remove the hexagon nut (special) fixing pulley B by rotat-
3. Remove the belt with sliding it out while rotating pulley B.
4. Remove the hexagon nut (special) fixing pulley B by rotat-
ing it counterclockwise.
5. Remove the round plain washer, lock washer and pulley
B.
6. Remove U-clip and pull the connector lower unit out
toward the inner side.
Tips on assembly
Tips on assembly
• Position each "D" cut of the connector lower unit, pulley
B and lock washer.
38
6.8.
Heater case base assy
1. Remove a lead wire off the hook of angle.
2. Remove the 4 screws and detach the heater case base
assy.
3. Remove the heater case unit from the angle.
4. Remove an angle and screw one off the frame of insulator
and exclude Angle.
Tips on assembly
• Set the positioning marks across from each other on the
heater case side and on heater case base side.
39
6.9.
Motor assy
1. Remove 4 screws and detach the motor assy.
6.10. Heater case and frame of insulator
1. Remove the hook of the frame of insulator.
Take off a hook with pliers.
40
2. Remove a frame of insulator off the heater case unit.
When I am hard to take off a crow from the lib of the
heater case unit, take it off by minus drivers.
heater case unit, take it off by minus drivers.
6.11. Temperature fuse
1. Remove screw/nut of the frame of insulator, and change a
themal fuse.
Click on the first or last page to see other SD-2511WTS service manuals if exist.