Panasonic NA-148VB3WRU / NA-128VB3 / NA-147VB3 / NA-127VB3WRU Service Manual ▷ View online
25
4. Remove the detergent drawer housing assembly.
10.11. Power Cable Group and Para-
site Filter
1. Remove the five connectors that is connected to the para-
site filter.
2. Remove two screws fixing the parasite filter.
3. Pull the power cable group up as it is shown in the pic-
ture.
4. Remove parasite filter fixing body group as it is shown in
the picture.
26
10.12. Electronic Pressure Switch
(EPS)
1. Remove the connector that is connected to the EPS.
2. Pull the EPS upward to remove as it is shown in the pic-
ture.
3. Remove the EPS hose handcuffs and EPS hose as it is
shown in the picture.
10.13. Door Lock
1. Remove the connector that is connected to the door lock.
10.14. Pump Motor
1. Remove pipe clip that fixes the drain hose.
2. Remove pipe clip fixing the tub outlet hose.
27
3. Remove the connector that is connected to the pump
motor.
4. Remove four screws fixing the pump motor.
5. Remove pipe clip fixing the twinjet hose.
10.15. Front Counterweight
1. Remove four screws fixing the front counterweight on the
front. (Box wrench size 13 mm)
2. Pull the counterweight back.
10.16. Heater
1. Remove the four connectors that is connected to the
heater.
28
2. Remove one nut fixing the heater slightly. (box wrench
size 8 mm)
3. Hold the heater and pull it out.
10.17. Twinjet System
1. Remove pipe clip fixing the twinjet hose.
2. Remove the two twinjet hoses from the gasket.
3. Remove screw fixing the circulation pump. (using T20)
4. After lay down the washer on its rear side, and press the
pawl inward.
Click on the first or last page to see other NA-148VB3WRU / NA-128VB3 / NA-147VB3 / NA-127VB3WRU service manuals if exist.