Panasonic NA-148VB3WRU / NA-128VB3 / NA-147VB3 / NA-127VB3WRU Service Manual ▷ View online
29
5. Remove the circulation pump.
6. Remove the connector that is connected to the circulation
pump.
10.18. Tub Bellows Seal
1. Remove the tub gasket clip by using small screwdriver.
2. Hold the tub bellows seal and gasket-body fixing spring
together, and pull them up.
10.19. Transport Screw
1. Remove four transport screws. (box wrench size 10 mm)
2. Hold the transport screw and pull it out.
30
10.20. Upper Counterweight
1. Remove two screws fixing the upper counterweight by
using box wrench size 13 mm.
2. Remove the upper counterweight.
10.21. Washing Group
1. Remove the connector that is connected to the motor.
2. Cut the five lead wire holders as shown the pictures.
3. Remove the four screws fixing the spring hanger sheet
iron.
4. Remove the washing group as it is shown in the picture.
31
10.22. Shock Absorber PIN
1. Remove two pins fixing the shock absorber as shown in
the picture.
10.23. Belt
1. Remove the belt as it is shown the picture.
10.24. Driven Pulley
1. Remove the screw fixing driven pulley it is shown the pic-
ture (By using T40).
2. Remove the driven pulley it is shown the picture.
10.25. Motor
1. Remove the four screws fastening the motor under the
tub by using T40.
2. Pull the motor up for disassembly.
32
10.26. Tub Entrance with Bellow Hose
1. Remove the tub entrance with bellow hose.
10.27. Pressure Switch Hose Group
1. Remove screw fixing the pressure switch water reservoir.
2. Remove the tub exit with bellow hose with ball by using
box wrench size 10 mm.
10.28. Tub
1. Remove twenty four screws fixing tub using box wrench
size 8 mm.
10.29. Drum
1. Remove the drum.
Click on the first or last page to see other NA-148VB3WRU / NA-128VB3 / NA-147VB3 / NA-127VB3WRU service manuals if exist.