Panasonic NA-148VB3WRU / NA-128VB3 / NA-147VB3 / NA-127VB3WRU Service Manual ▷ View online
21
10.6. Control Panel
1. Remove the screw which fix the control panel to the front
panel.
2. Remove three screws fixing the control panel.
3. Pull the control panel up.
4. Remove connectors as it is shown in the picture.
5. Remove electronic card cover as it is shown in the pic-
tures by using small screwdriver.
22
10.7. Kick Plate
1. Remove the right part of the kick plate as it is shown in
the picture.
2. Remove two screws fixing the kick plate.
3. Pull the kick plate left and push it down.
10.8. Front Panel
1. Remove two screws fixing the front panel at the bottom as
it is shown in the picture by using T25.
2. Remove two screws fixing the door lock as it is shown in
the pictures.
23
3. Remove the tub bellows seal as it is shown in the pic-
tures.
4. Remove two screws fixing front panel at the upper as it is
shown in the picture.
5. Remove twinjet t-elbow screw fixing front panel at the
upper as it is shown in the picture.
6. Remove twinjet t-elbow fixing front panel at the upper as it
is shown in the picture.
7. Remove the front panel as it is shown in the pictures.
24
10.9. Upper Support Bracket
1. Remove two screws fixing the body group at the front as it
is shown in the picture.
2. Remove two screws fixing the body group at the upper as
it is shown in the picture.
3. Remove detergent drawer group two clips fixing the upper
support bracket as it is shown in the picture.
10.10. Detergent Drawer Housing
1. Remove the tub seal clamp by using the pliers, which is
attached to the detergent drawer housing.
2. Remove the four connectors that is connected to the feed
valve as it is shown in the picture.
3. Turn the feed valve counter clockwise slightly to remove.
Click on the first or last page to see other NA-148VB3WRU / NA-128VB3 / NA-147VB3 / NA-127VB3WRU service manuals if exist.