Panasonic KX-MC6020RU / KX-FAP317A / KX-FAB318A Service Manual ▷ View online
13
KX-MC6020RU
Case 1) Exchange Service
This service sends the replacement unit to customers first. Then the broken unit is sent to the service center.
1. Install dummy cartridges, which are used for toner leak prevention, before shipping the replacement units.
• This prevents leaking of the waste toner from the accumulator unit.
2. Request customers that install dummy cartridges, preliminarily installed in the replacement unit, to the broken unit and send it
to the service center.
3. Request customers to reinstall currently used toners and drums to the replacement unit.
Caution:
If the broken unit is shipped without dummy cartridges, the waste toner leaks into the inside of the units as shown below so that
it becomes unrepairable.
it becomes unrepairable.
*Dummy cartridges are provided as Service parts. (P/N: PNZE2MC6020M) (Refer to FIXTURES AND TOOLS (P.481).)
14
KX-MC6020RU
Case 2) Regular Service
1. Request customers that send the broken unit with consumable supplies.
2. Response of service center after completing repairs
• Remove all toners and drums and repack the repaired
unit to ship. (Refer to Repack Procedure (P.15))
• Shipping Kit is provided as service parts (P/N:
PNZE1MC6020M). (Refer to FIXTURES AND TOOLS
(P.481).)
(P.481).)
Case 3) On site Service
The unit is not shipped to anywhere so that no need to take toner leaking precautions.
15
KX-MC6020RU
4.3.2.
Repack Procedure
1.
Open the front cover (1) by holding the center part.
2.
Unlock the drum cartridge cover by pushing the tabs (2) in the direction
of the arrows.
of the arrows.
3.
Lift up the levers (3) and open the drum cartridge cover (4).
16
KX-MC6020RU
4.
Remove each toner cartridge (5) from the main unit. From left to right,
yellow, magenta, cyan, black.
yellow, magenta, cyan, black.
• Do not touch the toner cartridge shutter at the bottom of the toner
cartridge. The toner may spill out of the toner cartridge.
5.
Put each toner cartridge (6) into protective tray (7).
6.
Apply shipping tapes (8) to each toner cartridge (9).
7.
Put the 4 toner cartridges into the protection bags (10).
8.
Remove the monochrome drum cartridge (11) from the main unit.
• Do not touch or scratch the accumulator unit (12).
Click on the first or last page to see other KX-MC6020RU / KX-FAP317A / KX-FAB318A service manuals if exist.