Panasonic KX-FP88RS-B Service Manual ▷ View online
2.14.6. SETTING YOUR LOGO
The logo can be your company, division or name.
(1) Press
.
Display:
(2) Press
, then
.
(3) Press
.
(4) Enter your logo, up to 30 characters, by using the dial
keypad.
Example: Bill
a. Press
twice.
b. Press
six times.
c.
Press
six times.
d. Press
to move the cursor to the next space and
press
six times.
(5) Press
.
(6) Press
.
Note:
•
•
You can enter your logo by rotating
.
To correct a mistake
•
•
Press
or
to move the cursor to the incorrect character,
then make the correction.
To insert a character
1.
1.
Press
or
to move the cursor to the position to the right of
where you want to insert the character.
2.
Press
(Insert) to insert a space and enter the character.
To delete a character
•
•
Move the cursor to the character you want to delete and press
.
17
KX-FP88RS-B
2.14.7. TO SELECT CHARACTERS WITH THE DIAL KEYPAD
Pressing the dial keys will select a character as shown below.
2.14.8. TO SELECT CHARACTERS USING THE EASY DIAL
Instead of pressing the dial keys, you can select characters using the EASY DIAL.
(1) Rotate
until
the
desired
character
is
displayed.
(2) Press
to move the cursor to the next space.
•
•
The character displayed in step 1 is inserted.
(3) Return to step 1 to enter the next character.
Display order of characters
18
KX-FP88RS-B
2.14.9. REPLACING THE FILM CARTRIDGE
When the unit runs out of ink film, the following message will be displayed.
Display: Refer to LCD MESSAGES(P.3).
Install a new ink film. The following ink films are available for replacement. Each roll prints about 140 A4 size pages.
Refer to OPTIONAL ACCESSORIES.(P.8)
Model No. KX-FA53A: Replacement film (1 roll)
Model No. KX-FA55A: Replacement film (2 rolls)
(1) Open the front cover by pulling up the center part.
(2) Push the back cover open button (
) and open the back
cover (
).
(3) Pull up the blue gear side and remove the used ink film.
Remove the used core.
19
KX-FP88RS-B
(4) Remove the stoppers and tags from the new ink film. Find
the “T” shaped gear (blue).
(5) Insert the blue core of the front ink film roll into the right slot
of the unit (
). Insert the “T” shaped gear (blue) into the
left slot of the unit (
).
Insert the back ink film roll (
).
(6) If the ink film is slack, tighten it by winding the gear.
(7) Close the back cover securely by pushing down on the
dotted area at both ends (
).
Close the front cover securely (
).
•
•
The following message will be displayed while the unit is
checking that there is no slack on the ink film.
checking that there is no slack on the ink film.
Display:
Refer to LCD MESSAGES(P.3).
Note:
•
•
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
rub off on your hands like carbon paper.
20
KX-FP88RS-B
Click on the first or last page to see other KX-FP88RS-B service manuals if exist.