Panasonic KX-FP88RS-B Service Manual ▷ View online
2.13. CONNECTIONS
(1) Connect the handset cord.
(2) Connect the telephone line cord.
(3) Connect the power cord.
•
•
When the power is turned on for the first time, the unit will print some basic information.
Note:
•
•
When you operate this product, the power outlet should be near the product and easily accessible.
13
KX-FP88RS-B
2.14. INSTALLATION
2.14.1. INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
•
•
Avoid excessive heat or humidity.
•
•
Use the unit within the following ranges of temperature and humidity.
•
•
Ambient temperature: 5°C to 35°C
•
•
Relative humidity: 20% to 80% (without condensation)
•
•
Power cord length should be less than 5 meters (16.4 feet). Using a longer cord may reduce the voltage or cause
malfunctions.
malfunctions.
•
•
Avoid direct sunlight.
•
•
Do not install near devices which contain magnets or generate magnetic fields.
•
•
Do not subject the unit to strong physical shock or vibration.
•
•
Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
•
•
To protect the unit from damage, hold both sides when you move it.
2.14.2. INSTALLING THE PAPER TRAY
Insert one tab on the paper tray into one slot on the back of the unit
(
(
) and then insert the other tab into the other slot (
).
Note:
•
•
Do not place the unit in areas where the paper tray may be
obstructed by a wall, etc.
obstructed by a wall, etc.
14
KX-FP88RS-B
2.14.3. INSTALLING THE RECORDING PAPER
A4* size recording paper can be loaded. The unit can hold up to 50 sheets of 60 g/m
2
to 75 g/m
2
(16 lb. to 20lb.) paper or 30 sheets
of 90 g/m
2
(24 lb.) paper.
*A4=210 mm × 297 mm (8 1/4" × 11 11/16")
(1) Fan the stack of paper to prevent a paper jam.
(2) Pull the tension bar forward and hold open while inserting
the paper.
•
•
The paper should not be over the tab.
•
•
If the paper is not inserted correctly, readjust the paper
or the paper may jam.
or the paper may jam.
Note for recording paper:
•
•
Avoid paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for
resumes.
resumes.
•
•
Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.
•
•
Avoid extremely smooth or shiny paper that is highly textured.
•
•
Avoid paper that is coated, damaged or wrinkled.
Note:
•
•
Avoid double-sided printing
•
•
Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.
•
•
Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the print quality.
15
KX-FP88RS-B
2.14.4. ADDING PAPER TO THE PAPER TRAY
(1) Pull the cassette open lever forward and remove all of the
installed paper.
(2) Add paper to the removed paper and straighten.
(3) Fan the stack of paper.
(4) Pull the tension bar forward and hold open while inserting
the paper.
2.14.5. DOCUMENTS THE UNIT CAN FEED
Note:
•
•
Remove chips, staples or other similar fastening objects.
•
•
Check that ink, paste or correction fluid has dried.
•
•
Do not send the following types of documents. Use copies for fax transmission.
— Chemically treated paper such as carbon or carbon less duplicating paper
— Electrostatically charged paper
— Heavily curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the front (e.q. newspaper)
16
KX-FP88RS-B
Click on the first or last page to see other KX-FP88RS-B service manuals if exist.