Panasonic KX-FLB758RU Service Manual ▷ View online
2.2. SPECIFICATIONS
Applicable Lines:
Public Switched Telephone Network
Document Size:
Max. 216 mm (8 1/2”) in width
Max. 600 mm (23 5/8”) in length
Effective Scanning Width:
208 mm (8 3/16”)
Effective Printing Width:
A4: 202mm
Letter/Legal: 208mm
Transmission Time*:
Approx. 4 s/page (ECM-MMR Memory transmission)**
Scanning Density:
Horizontal:
11.8 pels/mm (300 pels/mm)
Vertical:
3.9 lines/mm (100 lines/mm)-STANDARD
11.8 lines/mm (300 lines/mm)-FINE/SUPER FINE/PHOTO
Halftone Level:
64-level
Scanner Type:
Contact Image Sensor (CIS)
Printer Type:
Laser printer
Data Compression System:
Modified Huffman (MH), Modified READ (MR), Modified, Modified READ (MMR)
Modem Speed:
33,600/31,200/28,800/26,400/24,000/21,600/19,200/16,800/14,400/12,000/9,600/7,200/
4,800/2,400 bps; Automatic Fallback
Operating Environment:
10°C—32.5°C (50°F—90.5°F), 20—80% RH (Relative Humidity)
Dimensions (H×W×D):
217 mm × 443 mm × 461 mm (8 17/32”×17 7/16”×18 5/32”)
Mass (Weight):
Approx. 9.2 kg (20.3 lb.)
Power Consumption:
Standby: Approx. 7 W
Transmission: Approx. 17 W
Reception: Approx. 250 W
Copy: Approx. 250 W
Maximum: Approx. 900 W (When the fuser unit turns on)
Power Supply:
220-240 V AC, 50/60 Hz
Memory Capacity:
Approx. 150 pages of memory transmission/reception.
(Based on ITU-T No. 1 Test Chart in standard resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm—800 nm
Emission duration: Continuous
Print Speed:
10 ppm (page per minute)
Printing Resolution:
600 × 600 dpi
OS:
Works with Windows 95/98/Me/2000/NT4.0/XP
Interface:
USB/Parallel (IEEE 1284)
* Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other
party’s machine.
party’s machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart and original mode. (Refer to ITU-T No.1 TEST CHART(P.232).)
If the capability of the other party´s machine is inferior to your unit, the transmission time may be longer.
If the capability of the other party´s machine is inferior to your unit, the transmission time may be longer.
Note:
·
Any details given in these instructions are subject to change without notice.
·
The pictures and illustrations in these instructions may vary slightly from the actual product.
Design and specifications are subject to change without notice.
2.3. OPTIONAL ACCESSORIES
Model No.
Description
Specifications
KX-FA76A
Toner cartridge
1 toner cartridge
KX-FA78A
Drum unit
1 drum unit
13
KX-FLB758RU
3 INSTALLATION
3.1. LOCATION OF CONTROLS
3.1.1. OVERVIEW
Note:
*The paper stacker may not be shown in all illustrations.
3.1.2. REAR VIEW
14
KX-FLB758RU
3.1.3. CONTROL PANEL
15
KX-FLB758RU
3.2. CONNECTIONS
(1) Connect the handset cord.
The jack on the longer, uncoiled end of the handset cord should be connected to the unit.
(2) Connect the telephone line cord.
(3) Connect the power cord.
·
When the power is turned on for the first time, the unit will print some basic information.
Caution:
·
When you operate this produce, the power outlet should be near the product and easily accessible.
·
Be sure to use the telephone line cord included in this unit.
·
Do not extend the telephone line cord.
Note:
·
You can connect an answering machine or extension telephone to the external telephone jack ("EXT") on this unit.
·
When the power is turned on and the display shows the following, unlock the shipping lock.
·
Telephone line connection is TNV (Telecommunication Network Voltage).
16
KX-FLB758RU
Click on the first or last page to see other KX-FLB758RU service manuals if exist.