Panasonic DVD-S511E / DVD-S511EB / DVD-S511EG Service Manual ▷ View online
2. Release the tabs.
7.8. Mother P.C.B. and Power SW
P.C.B.
1. Unscrew the screws.
13
DVD-S511E / DVD-S511EB / DVD-S511EG
7.9. Service Position
Caution:
Put an insulation material between Module P.C.B. and Mother P.C.B..
7.9.1. Servicing position of the Module P.C.B.
7.9.2. Servicing position of the Mother P.C.B.
7.9.3. List of the Extension Cables
14
DVD-S511E / DVD-S511EB / DVD-S511EG
8 ASSEMBLING AND
DISASSEMBLING THE
MECHANISM UNIT
MECHANISM UNIT
8.1. Disassembly Procedure
8.2. Traverse Unit
1. Slide the lever (A) in the arrow direction (to the opposite
side) till it stops.
2. Slide the lever (A) further by bending the tab at the right
side of the lever A in the right direction. (The right groove
opens and the boss becomes seen.)
opens and the boss becomes seen.)
3. Open the lever (B) to left. (The 2 grooves at the left side
open.)
4. Remove the traverse unit.
15
DVD-S511E / DVD-S511EB / DVD-S511EG
1. Slide the guide tray unit while pressing the stopper in the
arrow direction, and remove the guide tray unit.
2. Raise the loading unit.
3. Slide the lever in the arrow direction till it stops and pull the
tray out.
4. Spread the tabs at the both sides and pull the tray out. (The
tray slides a little forward and stops.)
5. Remove the drive arm concave phase from the tray slider
and tray.
(Assembling the tray unit)
1. Insert a part of the tray into the unit sliding over the
groove on the mechanical chassis unit.
2. Insert the tray to the point before the tab of the
mechanical chassis unit.
3. Hook the drive arm concave phase over the tray and the
tray slider.
8.3. Tray
16
DVD-S511E / DVD-S511EB / DVD-S511EG
Click on the first or last page to see other DVD-S511E / DVD-S511EB / DVD-S511EG service manuals if exist.