Panasonic DMR-EH65EE / DMR-EH65GC / DMR-EH65GCS / DMR-EH65GN Service Manual ▷ View online
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
White Picture Output
White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive by
“I/P switch: [1] [4]”
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive by
“I/P switch: [1] [4]”
*Initial mode is “Interlace”.
Press [1] [1] in service mode.
Switch Interlace/Progressive
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
mode.
*I/P are switched alternately.
Magenta Picture Output Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive by
“I/P switch: [1] [4]”
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive by
“I/P switch: [1] [4]”
*Initial mode is “Interlace”.
Press [1] [2] in service mode.
Switch Interlace/Progressive
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
Output mode.
*I/P are switched alternately.
RTSC Return in XP
(A & V)
(A & V)
AV1 input signal is encoded (XP), decoded
(XP) and output decoded signal to external
without DISC recording and DISC playback.
(XP) and output decoded signal to external
without DISC recording and DISC playback.
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Audio 48kHz
Press [1] [3] in service mode.
Switch Interlace/Progressive
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.
mode.
*I/P are switched alternately.
Audio 44.1 kHz/ 48 kHz Switch
Press [2] [4] in RTSC Return XP
mode.
*48 kHz / 44.1 kHz are switched
alternately.
mode.
*48 kHz / 44.1 kHz are switched
alternately.
I/P Switch
Switch Interlace and Progressive in EE mode.
*Initial setting is “Interlace”.
*This command is effective during executing
“White Picture Output”, “Magenta Picture
Output” and “RTSC Return in XP (A & V)”
modes.
*Initial setting is “Interlace”.
*This command is effective during executing
“White Picture Output”, “Magenta Picture
Output” and “RTSC Return in XP (A & V)”
modes.
Initial mode is Interlace
Switch Interlace/Progressive
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.
*I/P are switched alternately.
Audio Mute (XTMUTE)
Check whether mute is applied normally by
the timer microprocessor.
the timer microprocessor.
Press [2] [1] in service mode.
Audio Mute (XDMUTE)
Check whether mute is applied normally by
the Digital P.C.B..
the Digital P.C.B..
Press [2] [2] in service mode.
Audio Pattern Output
The audio pattern stored in the internal
memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
Initial mode (Audio 48kHz)
Press [2] [3] in service mode.
Audio 44.1kHz/48kHz switching
Press [2] [4] in Audio Pattern Output
mode.
*48 kHz / 44.1 kHz are switched
alternately.
mode.
*48 kHz / 44.1 kHz are switched
alternately.
25
DMR-EH65EE / DMR-EH65GC / DMR-EH65GCS / DMR-EH65GN
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
HDD READ inspection
Perform a complete read inspection of the
HDD.
HDD.
When the HDD is OK
If the HDD is defective
Press [3] [1] in service mode.
*When
*When
canceling
the
checking
mode while executing, do “forced
power-off”.
Method:
Press the “POWER” button more
than 10 seconds.
power-off”.
Method:
Press the “POWER” button more
than 10 seconds.
Laser
Used
Time
Indiction
Check laser used time (hours) of drive.
l(*****) is the used time display in
hour.
lLaser used time of DVD/ CD in
Playback/Recording
mode
is
counted.
Press [4] [1] in service mode.
Delete the Laser Used
Time
Time
Laser used time stored in the memory of the
unit is deleted.
unit is deleted.
Press [9] [5] in service mode.
26
DMR-EH65EE / DMR-EH65GC / DMR-EH65GCS / DMR-EH65GN
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
RAM Drive Last Error
RAM Drive error code display.
*For details about the drive error code, refer
to the Service Manual for the specific RAM
Drive.
*For details about the drive error code, refer
to the Service Manual for the specific RAM
Drive.
1. Error Number is displayed for 5
seconds.
seconds.
2. Time when the error has occurred
is displayed for 5 seconds.
is displayed for 5 seconds.
DD: Day
hh: Hour
mm: Minute
3. Last Drive Error (1/2) is displayed
for 5 seconds.
hh: Hour
mm: Minute
3. Last Drive Error (1/2) is displayed
for 5 seconds.
4. Last Drive Error (2/2) is displayed
for 5 seconds.
for 5 seconds.
5. Error occurring Disc type is
displayed for 5 seconds.
displayed for 5 seconds.
6. Disc Maker ID is displayed for 5
seconds.
seconds.
7. Factor of Drive Error occurring is
left displayed
left displayed
Press [4] [2] in service mode.
When
When
“INFO******”
is
being
displayed, past 19 error histories
can be displayed by pressing [0] [1]
- [1] [9]
can be displayed by pressing [0] [1]
- [1] [9]
In case that the maker cannot be
identified, display is black out.
identified, display is black out.
Delete the Last Drive
Error
Error
Delete the Last Drive Error information stored
on the DVD RAM-Drive.
on the DVD RAM-Drive.
Press [9] [6] in service mode.
Laser power confirmation Drive state is judged based on difference
between laser power value at shipping and
present laser power value.
present laser power value.
If DVD-RAM disc in not inserted,
[NO DISC] is displayed.
If power value study was filed,
[ERROR] is displayed.
[NO DISC] is displayed.
If power value study was filed,
[ERROR] is displayed.
1.
into RAM
Drive in service mode. (Other
media are assumed to be non-
correspondence.)
media are assumed to be non-
correspondence.)
2.
Press [4] [4].
Turn on all FL/LEDs
All segments of FL and all LEDs are turned
on.
on.
All segments are turned on.
Press [5] [1] in service mode.
PB HIGH Signal Output
8 pin of AV 1 Jack (PB HIGH terminal) is High
(approx. 11V DC).
(approx. 11V DC).
Press [5] [2] in service mode.
PB
MIDDLE
Signal
Output
8 pin of AV 1 Jack (PB HIGH terminal) is
Middle (approx. 5.5V DC)
Middle (approx. 5.5V DC)
Press [5] [3] in service mode.
27
DMR-EH65EE / DMR-EH65GC / DMR-EH65GCS / DMR-EH65GN
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
Front
connection
inspection
Press all front keys and check the connection
between Main P.C.B. and Front key Switches.
between Main P.C.B. and Front key Switches.
(1) Each time a key is pressed,
segment turned on increases one
by one.
(2) Total umber of keys that have
been pressed.
segment turned on increases one
by one.
(2) Total umber of keys that have
been pressed.
Press [5] [4] in service mode.
Production Date Display Display the date when the unit was produced.
YY: Year
MM: Month
DD: Day
MM: Month
DD: Day
Press [6] [1] in service mode.
Display the accumlated
working time
working time
Display the accumulated unit´s working time.
(Indicating unit: Second)
Press [6] [4] in service mode.
Display the Error History Display the Error History stored on the unit.
Display reason of error for 5
seconds.
seconds.
01:
Defect of Digital P.C.B.
(AV DEC / MAIN CPU)
02:
Defect of RAM Drive.
03:
Defect of Disc.
04:
Defect
Defect of Digital P.C.B.
(AV DEC / MAIN CPU)
02:
Defect of RAM Drive.
03:
Defect of Disc.
04:
Defect
of
Digital
P.C.B.
or
Communication Error.
05:
Defect of Digital P.C.B.
(AV DEC / MAIN CPU)
06:
Defect of HDD.
05:
Defect of Digital P.C.B.
(AV DEC / MAIN CPU)
06:
Defect of HDD.
Display the time when the error has
occurred for 5 seconds.
occurred for 5 seconds.
DD: Day
hh: Hour
mm: Minute
Accumulated
hh: Hour
mm: Minute
Accumulated
working
time
till
occuring
of
the
error
is
left
displayed.
(Indicating unit: Second)
Press [6] [5] in service mode.
Then press [0] [1] ~ [1] [9], the past
19 error histories are displayed.
Then press [0] [1] ~ [1] [9], the past
19 error histories are displayed.
Delete the Error History
Delete Error History information stored on the
unit.
unit.
Press [9] [7] in service mode.
SD card WRITE check
Delete Error History information stored on the
unit.
unit.
When the WRITE check is OK.
When the WRITE check is NG.
*Note:
The image stored in the SD card will
be erased.
be erased.
Insert a SD card to SD card slot,
and press [7] [4] in service mode.
*Insert SD card while the power is
off.
*Check for [CARD SD] display on
the FL display and go on the
procedure.
and press [7] [4] in service mode.
*Insert SD card while the power is
off.
*Check for [CARD SD] display on
the FL display and go on the
procedure.
28
DMR-EH65EE / DMR-EH65GC / DMR-EH65GCS / DMR-EH65GN
Click on the first or last page to see other DMR-EH65EE / DMR-EH65GC / DMR-EH65GCS / DMR-EH65GN service manuals if exist.