Panasonic DMP-BD75EB / DMP-BD75EE / DMP-BD75EF / DMP-BD75EG Service Manual ▷ View online
25
26
9 Service Fixture & Tools
*The above parts are supplied by AVC-CSC-SPC.
27
10 Disassembly and Assembly Instructions
10.1. Unit
10.1.1.
Disassembly Flow Chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
10.1.2.
P.C.B. Positions
28
10.1.3.
Top Case
1. Remove the 3 screws (A).
2. Slide Top Case rearward and open the both ends at rear
2. Slide Top Case rearward and open the both ends at rear
side of the Top Case a little and lift the Top Case in the
direction of the arrows.
direction of the arrows.
10.1.4.
Front Panel
10.1.4.1. Tray Ornament
1. Remove the Drive Cover in direction of (1).
2. Perform the step “6. 1. Taking out the Disc from Drive Unit
2. Perform the step “6. 1. Taking out the Disc from Drive Unit
when the Disc cannot be ejected by OPEN/CLOSE but-
ton” and eject tray.
ton” and eject tray.
3. Unlock 2 tabs turn,
Pull the Tray Ornament in direction of (2).
10.1.4.2. Front Panel
1. Unlock 6 tabs (A) - (F) turn.
Pull with the Front Panel in the direction of your side.
10.1.5.
Power SW P.C.B.
1. Remove the wire with connector (A).
2. Remove the screw (A) to remove Power SW P.C.B..
2. Remove the screw (A) to remove Power SW P.C.B..
10.1.6.
Rear Panel
1. Remove the 3 screws (A) and 1 screw (B).
2. Unlock 2 locking tabs (A) to remove the Rear Panel.
2. Unlock 2 locking tabs (A) to remove the Rear Panel.
Click on the first or last page to see other DMP-BD75EB / DMP-BD75EE / DMP-BD75EF / DMP-BD75EG service manuals if exist.