DOWNLOAD Panasonic DMP-BD60EG / DMP-BD60EB / DMP-BD60EE / DMP-BD60EF / DMP-BD80EG / DMP-BD80EB Service Manual ↓ Size: 2.72 MB | Pages: 74 in PDF or view online for FREE

13

UNSUP-
PORT

Unsupported disc error

*An  unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.

Display for 5 seconds.

The character indication flows
sideways.

NO READ Disc read error

*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.

HARD
ERR

Drive error

The drive detected a hard error.

Display for 5 seconds.

The character indication flows
sideways.

SELF
CHECK

Restoration operation

Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
BDP drive.

No display

The character indication flows
sideways.

PLEASE
WAIT

Unit is in termination process

Unit is in termination process now.

BYE

 is displayed and power will be turned off.

No display

The character indication flows
sideways.

UNFOR-
MAT

Unformatted disc error

You have inserted an unformatted BD-RE/
BD-R/DVD-RAM/DVD-RW or raw +R/+R DL,
or DVD-RW of DVD-Video format.

This disc is not for-
matted properly.
Cannot be played.

The character indication flows
sideways.

No PLAY

When there is a viewing restric-
tion on a BD-Video or DVD-
Video.

Rating password is set.

No display

Item

FL display

Key operation

Mode name

Description

Front Key

Rating password

The audiovisual level setting password is ini-
tialized to 

Level 8

.

Open the tray, and press [SKIP REV
(Remote Controller)] and [PLAY]
simultaneously for 5 seconds.

Service Mode

Setting every kind of modes for servicing.
*Details are described in 

.

When the power is off, press
[PAUSE], [PLAY] and [SETUP
(Remote Controller)] keys simulta-
neously for 5 seconds.

BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is

cleaned.
Screen display: [The history has been
cleared] is displayed for five seconds.

Same display as before execution. 

When the power is on, disc is not in
tray, press [STOP] and [POWER
(Remote Controller)] keys simulta-
neously for 5 seconds.

Forced disc eject

Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.

The display before execution
leaves.

When the power is off, press
[PAUSE] and [OPEN/CLOSE] keys
simultaneously for 5 seconds.

NTSC/PAL system select To switch PAL/NTSC alternately.

The 

display 

before 

execution

leaves.

When the power is on (SS mode),
press [STOP] and [OPEN/CLOSE]
simultaneously for 5 seconds.

Forced power-off

When the power button is not effective while
power is ON, turn off the power forcibly.

Display in P-off mode.

Press [POWER] key over than 4
seconds.

Error Code

Diagnosis contents

Description

Monitor Display

Automatic FL display

14

Aging

Perform sequence of modes as * Aging
Description shown below continually.

Display following the then mode.

When  the  power  is  ON,  press
[PAUSE], [PLAY] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.

If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 4 seconds.

Demonstration lock/
unlock

Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray and not released by 

Main unit

initialization

 of service mode.

*When lock the tray.

LOCK

 is displayed for 3 seconds.

When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.

When a disc is not in tray, this
setting is not effective.

*When unlock the tray.

UNLOCK

 is displayed for 3 sec-

onds.

When the power is on (SS mode),
press [PLAY] and [OPEN/CLOSE]
keys simultaneously for 5 seconds.

*When press OPEN/CLOSE key
while the tray being locked.

Display 

LOCK

 for 3 seconds.

Press [OPEN/CLOSE] key while the
tray is being locked.

Progressive initialization

The  progressive setting is initialized to Inter-
lace.

The display before execution
leaves.

When the power is on (SS mode),
press [STOP] and [PLAY] simulta-
neously for 5 seconds.

Item

FL display

Key operation

Mode name

Description

Front Key

15

Default setting

The date of Menu, Mode and EEPROM set-
ting, etc. is set to the default condition in fac-
tory.

HELLO, BYE are displayed.

When the power is off, press
[PAUSE], [POWER] and [OPEN/
CLOSE] simultaneously for 5 sec-
onds.

Item

FL display

Key operation

Mode name

Description

Front Key

16

Service mode setting: While the power is off, press [PAUSE], [PLAY] and [SETUP (Remote Controller)] simultaneously for five
seconds.

Item

FL display

Key operation

Mode name

Description

(Remote controller key)

Release Items

Item of Service Mode executing is cancelled.

Press [0] [0] in service mode.

Error Code Display

Last Error Code of U/H/F held by Timer is dis-
played on FL.
*Details are described in 

If any error history dose not exist,
[F00] is displayed.

Press [0] [1] in service mode

ROM Version Display

1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (displayed for 5
sec.)
6. B002 version (displayed for 5 sec.)
7. B003 version (left displayed)

  

*

 are version displays.

Press [0] [2] in service mode

Drive application check

Checking whether the drive is applicable drive
or not.

Press [0] [3] in service mode.

Drive check

Simple quality of BD drive.

Press [3] [8] in service mode.