Panasonic DMP-B15EB / DMP-B15EE / DMP-B15EG Service Manual ▷ View online
9
3.6.
Static Electricity Protection Measures
• The laser diode in the traverse unit (optical pick-up) may break down due to potential difference caused by static electricity of
clothes or human body.
So, be careful of electrostatic breakdown during repair of the traverse unit (optical pick-up).
So, be careful of electrostatic breakdown during repair of the traverse unit (optical pick-up).
3.7.
Ground for electrostatic breakdown prevention
• As for parts that use optical pick-up (laser diode), the optical pick-up is destroyed by the static electricity of the working environ-
ment.
Repair in the working environment that is grounded.
Repair in the working environment that is grounded.
3.7.1.
Work table grounding
• Put a conductive material (sheet) or steel sheet on the area where the traverse unit (optical pick-up) is placed, and ground the
sheet.
3.7.2.
Human body grounding
• Use the anti-static wrist strap to discharge the static electricity from your body.
3.8.
Handling of Traverse unit (optical pick-up)
1. Do not subject the traverse unit (optical pick-up) to hard shock as it is high precision mechanism.
2. Install the traverse unit, and then remove the short pin to discharge.
2. Install the traverse unit, and then remove the short pin to discharge.
Connect the connector in a short time.
3. Take care not to apply excessive stress to the flexible cable.
4. Do not turn the variable resistor (laser power adjustment).
4. Do not turn the variable resistor (laser power adjustment).
It has already been adjusted.
10
4 Specifications
11
4.1.
Accessories
• AC adaptor
(RFEA219W-AA).................................................1 pc.
• Remote control
(N2QAJC000016)................................................1 pc.
• AC power supply cord (DMP-B15EB)
(K2CT3CA00004)................................................1 pc.
• AC power supply cord (DMP-B15EE/EG)
(K2CQ2CA00006)...............................................1 pc.
• Audio/Video cable
(K2KC4CB00026)................................................1 pc.
• Car DC Adaptor
(RFEC206P-Y)....................................................1 pc.
• Headrest Mounting Bracket
(RXQ1706)..........................................................1 pc.
• Safety belt
(RFC0150-K).......................................................1 pc.
• Cleaning cloth
(RFE0215)...........................................................1 pc.
• Button-type battery for remote control.................1 pc.
• Rechargeable battery pack..................................1 pc.
• Rechargeable battery pack..................................1 pc.
4.2.
Others (Licenses)
12
5 Location of Controls and Components
Overview
Instructions for operations are generally described using the
remote control in these operating instructions.
remote control in these operating instructions.
1
LCD screen
2
[CHARGE] indicator
While recharging the battery pack, this indicator lights up.
3
[
] indicator
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
indicator lights up in standby mode and goes out when the
unit is turned on.
4
Remote control signal sensor
5
Speaker
6
SD card slot
7
Audio/video input/output terminal
8
Headphone terminal [
]
(3.5 mm stereo mini jack)
9
HDMI AV OUT terminal
10 LAN terminal
11 Stand
12 Stopper wire
13 DC IN terminal
14 Turn the unit on and off
15 Switch the media to playback
11 Stand
12 Stopper wire
13 DC IN terminal
14 Turn the unit on and off
15 Switch the media to playback
It will switch every time it is pressed.
16 Stop
17 Playback
18 Skip title numbers, etc.
19 Adjust the volume
20
17 Playback
18 Skip title numbers, etc.
19 Adjust the volume
20
Show the OPTION menu
21 Return to previous screen
22 Selection/OK
22 Selection/OK
The Unit
1
2
3
4
5
3
4
5
Front View
6
8
9
7
11
10
Rear View
12
Side View
13
Battery pack (included)
Bottom View
To select:
Tilt up, down, left, or
right (
Tilt up, down, left, or
right (
[, , , ])
Example:
To select left item
To select left item
To enter:
Press straight in
Press straight in
Example:
To enter the operation
To enter the operation
Top View
Disc lid
[OPEN]
When the screen is opened
DISC
SD
AUX
NETWORK
VOLUME
RETURN
AV SELECT
PUSH：OK
OPTION
14
15 16 17
19 20 21
22
18
Click on the first or last page to see other DMP-B15EB / DMP-B15EE / DMP-B15EG service manuals if exist.