Panasonic DMP-B15EB / DMP-B15EE / DMP-B15EG Service Manual ▷ View online
13
Insert the button-type battery (included)
Pull out the holder.
Insert the battery and return the holder.
Keep the button-type battery out of reach of children to
prevent swallowing.
prevent swallowing.
Range of use
Bottom
Pull out while pressing here
A facing up
Lithium battery: CR2025
Lithium battery: CR2025
Remote control
signal sensor
signal sensor
Within 20 degrees angle
either up or down
either up or down
Within 30 degrees angle
either left or right
either left or right
Remote control transmitter
Within approx. 7 m in front
Within approx. 7 m in front
1
Turn the unit on and off
2
Select audio
3
Show the Home screen of the VIERA CAST
4
Use according to the instructions on the screen
5
Basic operations for playback
6
Show Pop-up menu
7
Show Top menu/Direct Navigator
8
Selection/OK, Frame-by-frame
To select: Press up, down, left, or right
(
(
[
,
, , ])
To enter: Press [OK]
Frame forward / Frame backward:
Frame forward / Frame backward:
(While paused) press left or right ([
][])
9
Show the OPTION menu
10 Select title numbers, etc./Enter numbers
or characters
11 Switch the media to playback
It will switch every time it is pressed.
12 Adjust the volume
13 Show FUNCTIONS menu
14 Return to previous screen
15 Show on-screen menu
16 Show status messages
17 Turn the unit off automatically
18 Change the screen settings
13 Show FUNCTIONS menu
14 Return to previous screen
15 Show on-screen menu
16 Show status messages
17 Turn the unit off automatically
18 Change the screen settings
Remote control
DISC
SD
AUX
NETWORK
1
4
8
9
7
5
6
10
14
12
18
17
11
13
15
16
2
3
3
14
6 Service Mode
Information necessary for service can be displayed.
Service mode setting :
Service mode setting :
1. Turn the power off.
2. Press the [ PLAYBACK ] [ VOLUME - ] and [ OPTION ] button simultaneously for five seconds.
3. It is displayed on LCD as [ SERV ]. :It is shown to have entered the service mode.
2. Press the [ PLAYBACK ] [ VOLUME - ] and [ OPTION ] button simultaneously for five seconds.
3. It is displayed on LCD as [ SERV ]. :It is shown to have entered the service mode.
([PLEASE WAIT] is displayed previously according to the A/V mode.)
4. The command is transmitted by attached remote control.
Method of making clear service mode : Press the power button (power off).
The display of information to each command is as follows.
The display of information to each command is as follows.
Note : Do not use it excluding the designated command.
15
16
Click on the first or last page to see other DMP-B15EB / DMP-B15EE / DMP-B15EG service manuals if exist.