Panasonic DMP-B15EB / DMP-B15EE / DMP-B15EG Service Manual ▷ View online
25
9.2.4.
DC Jack P.C.B.
1. Pull out the P1801(connector), and then remove the DC
Jack P.C.B..
9.2.5.
Main P.C.B.
1. Unscrew the 2 screws (A), and then remove the
speaker(L/R).
2. Pull out the P57001(FFC), the P57002(FFC), the
P57004(FFC) and the P1401(connector).
3. Unscrew the 5 screws (B).
4. Unscrew the 4 screws (C), and then remove the main
4. Unscrew the 4 screws (C), and then remove the main
P.C.B..
NOTE:
Pass through the jack part in the direction of the arrow(1)
when installing the main P.C.B..
when installing the main P.C.B..
9.2.6.
Remcon/LED P.C.B.
1. Lift the remcon/LED P.C.B. in the direction of the
arrow(1), and then remove it.
26
9.2.7.
SW P.C.B. 1, SW P.C.B. 2
1. Unscrew the 4 screws (A), and then remove the SW
P.C.B. 1 unit and SW P.C.B. 2 unit.
2. Unscrew the 2 screws (B).
3. Remove the 3 locking tabs, and then remove the SW
3. Remove the 3 locking tabs, and then remove the SW
P.C.B. 1.
4. Unscrew the 2 screws (C).
5. Remove the 3 locking tabs, and then remove the SW
5. Remove the 3 locking tabs, and then remove the SW
P.C.B. 2.
9.2.8.
Stand Unit
1. Unscrew the 6 screws (A).
2. Unscrew the 1 screw (B).
3. Unscrew the 2 screws (C), and then remove the heat
2. Unscrew the 1 screw (B).
3. Unscrew the 2 screws (C), and then remove the heat
radiation plate 4.
4. Remove the 11 locking tabs, and then remove the hinge
cover.
27
5. Remove the hinge for the stand with the flat screw-
driver.(Both right and left)
6. Remove the stand unit.
NOTE:
Wrap the soft cloth around the point of the flat screwdriver
so as not to damage the bottom cabinet etc.
so as not to damage the bottom cabinet etc.
9.2.9.
LCD Panel Unit
1. Remove the 2 locking tabs, slide the LCD hinge cover in
the direction of the arrow(1), and then remove the LCD
hinge cover.
hinge cover.
2. Open the LCD panel unit, push the [OPEN], and then
open the disc cover ass'y.
3. Unscrew the 2 screws (A).
4. Remove the 2 locking tabs, slide the LCD panel unit in the
4. Remove the 2 locking tabs, slide the LCD panel unit in the
direction of the arrow(2), and then remove the LCD panel
unit.
unit.
28
9.2.10. LCD Angle P.C.B.
1. Unscrew the 1 screw (A), and then remove the LCD angle
P.C.B..
9.2.11. Magnet, Stopper, Hinge
1. Unscrew the 11 screws (A).
2. Insert the flat screwdriver in the groove, and then remove
the 6 locking tabs.
3. Remove the stand.
4. Remove the stopper and the 2 magnets.
5. Unscrew the 2 screws (B), and then remove the
4. Remove the stopper and the 2 magnets.
5. Unscrew the 2 screws (B), and then remove the
hinge(L,R).
NOTE:
When remove the stand, magnet and stopper are removed
at the same time.
Be careful to loss.
at the same time.
Be careful to loss.
Click on the first or last page to see other DMP-B15EB / DMP-B15EE / DMP-B15EG service manuals if exist.